|
Description |
Downloads |
Specs |
Ordering |
|
 |
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
A3210 |
|
- Distance over Cat 5e/6 cabling:
- 480p video: 100m
- 720p video: 75m
- 1080i video: 50m
- Digital audio: 100
|
|
Permits audio & video transmission over Cat 5/6 cable. Applications include LCD monitors, plasma screens & projectors. 4 x RCA inputs & RJ45 connection. No power required. Transmission distance up to 100m depending on resolution required. Two units are required to form a link. Sold individually. |
 |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
 |
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
H8133 |
|
|
|
For high ceilings, extension poles allow projector mounting surface to be adjusted. |
 |
H8184 |
|
- Mounts To: Wall
- Screen Size: 10 to 24"
- Max VESA Dimensions: 100 x 100mm
- Max Weight: 15kg
- Horizontal Adjustment: 180 deg.
- Vertical Tilt Adjustment: 180 deg.
- Depth From Mounting Surface: 600 - 1000mm
- Bracket Dimensions: 140H x 140Wmm
|
|
Allows mounting of LCD screens from ceiling. Ideal for installations where wall mounting is not possible. Mounting height from ceiling can be varied from 600mm to 1000mm in 100mm steps. |
 |
H8190 |
|
- Works with or without a monitor bracket.
- Mounts to the left, right, top or bottom of the VESA bolt pattern.
- Works with H 8956 Hammond clear Raspberry Pi case.
- Pi can be oriented two different ways on bracket.
- VESA 75 or 100mm mountable.
- Cable tie slots for securing cables (5pcs cable ties included).
- Suits the Raspberry Pi 2+, 3b, 3b+
- Great for ICT departments using Raspberry Pi terminals as thin clients.
|
|
We use a lot of Raspberry Pi around the office, but we were surprised there were no decent VESA mount options available for it. So we made one! |
 |
H8220A |
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13-27" weighing up to 8kg. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
 |
L1040 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Fitted with back to back F type connector for easy termination. Includes two facia covers to suit your decor. |
 |
L2022 |
|
- Frequency: 47-790MHz
- Number of inputs: 1
- Number of outputs: 1
- Insertion loss: 791MHz ≤16dB
- Flatness: ±2dB
- Return loss: 12dB
- Out of band restraint: 820MHz ≥ 40dB
- Input impedance: 75 Ohms
- Output impedance: 75 Ohms
|
|
This inline filter connects between the wallpoint or masthead amp and the TV to filter out 4G cellphone frequencies. |
 |
P0682 |
|
|
|
Industry standard heavy duty speaker connector to 6.35mm Jack plug lead. Made using using super flex two core cable available in either 10 or 20m lengths. |
|
P0683 |
|
|
|
Industry standard heavy duty speaker connector to 6.35mm Jack plug lead. Made using using super flex two core cable available in either 10 or 20m lengths. |
 |
P1937B NEW
|
|
- Compatible with standard 3.5mm headphone jack audio receivers
- Plug and play functionality
- Short length makes it ideal to keep in your bag, desk or beside table
|
|
USB-C headphone adaptor so you can use your favourite headphones with your smartphone that no longer have a headphone jack. |
 |
P5920 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
 |
P5925 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with a HD9 female VGA connector. Supplied with two facia covers to suit your decor. |
 |
P5944 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
 |
P5945 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
 |
P5950 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, HDMI and 3.5mm audio. Supplied with two facia covers to suit your decor. |
