« Prev | Next»

A5330 • Mono 31 Band Graphic Equaliser

Print

Cat. Page 65

A5330

  • $199.00
  • 2+ $185.00
  • Price per each
  • Includes GST
 

Weight:4.00000Kg

    Perth Low stock - Call to confirm
    Balcatta Less than 5pcs
    Cannington Less than 5pcs
    Auburn In Stock
    Springvale Less than 5pcs
    Virginia Less than 5pcs
    Warehouse In Stock

Last updated 17-10-17 10:20:10

This product has been viewed 400 times.

  • Popular
  • Overview
  • Specifications
  • Downloads

Overview

Graphic equalisers can be invaluable for counteracting poor room or venue acoustic problems such as feedback and reverberation. The audio spectrum is divided across 31 notch bands each adjustable plus or minus 6 or 12dB from centre or flat position. Feedback or reverberation can be reduced or eliminated by “notching out” ie. reducing the system frequency response at the offending frequency sector. Usually connected between the pre amp out and power input of the sound system amplifier. An earth lift switch helps eliminate mains earth loop hum and buzz. High pass and low pass selectable filter switches provide filters of 12dB per octave below 40Hz and above 16kHz respectively. Three different types of connectors are provided for connection to the amplifier. 3 pin XLR and 6.35mm sockets offer balanced connections, whilst RCA sockets provide unbalanced operation. A switch is provided to bypass all control settings. Overall output is controlled by the level control.
Removal of AC power in the ON position puts unit into bypass mode making this suitable for 24V backup systems

Features

  • Constant Q circuit with a 3% centre frequency accuracy.
  • Selectable boost/cut range of ±6dB or ±12dB.
  • Active balanced and unbalanced input and output connections.
  • Variable input level control
  • Clip level indication
  • Ground lift switch
  • Power off automatic bypass function
  • 12 month warranty

Specifications

  • Input impedance: 20K Ohm (bal.) 15k Ohm (unbal.)
  • Maximum input level: 18dBv
  • Frequency resp: 20Hz - 15kHz (-3dB)
  • Input/output connections: Balanced XLR, 6.35mm jack, Unbalanced RCA
  • Output impedance: <600 Ohm
  • Maximum output level: 16dBv
  • Load impedance: >10K Ohm
  • High pass filter: -12dB/octave below 40Hz
  • Low pass filter: -12dB/octave above 16kHz
  • Frequency response: 20Hz to 50KHz at -3dB
  • THD + N %: 0.02% (@ 1KHz, all controls at middle position)
  • S/N ratio: 93dB (@ 1KHz)
  • Power supply: 230 Vac (±5%) -50Hz
  • Dimensions: 480W x 220D x 44H
  • Weight: 3.1Kg

*Specifications are subject to change without notice.

Thank you ! We have received your message.
Thank you ! We have received your message.