These 80VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q
Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices.
The advantage of the toroidal (donut) shape is that due to its symmetry the amount of magnetic flux that escapes outside the core (leakage flux) is minimised, therefore it radiates less electromagnetic interference (EMI) to nearby circuits or equipment. EMI is of increasing importance in modern low power, high frequency electronics.
Included mounting hardware
1 x Mounting plate
1 x Gasket
1 x Mounting bolt
1 x Nut
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
- Energy authority certified
Secondary (SEC) Current A
Current available where secondaries are connected in parallel.
Secondary (SEC) Current B
Current available where secondaries are connected in series.Dimensions
B : 87 d: 26 H : 37
Tolerance: ± 2%
* Outside diameter D is given as a maximum value, inner diameter d is give
*Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitabilityNote:
Must be used with a 1A external AC fuse.