Professional Audio » Microphones

C0321 3 Pin XLR Dynamic Handheld Paging Microphone
  • WAS $99.00
  • $59.00
  • Price per each
SAVE
$40.00

In Stock

3 Pin XLR Dynamic Handheld Paging Microphone

Designed for general paging applications where a traditional desktop paging microphone is impractical. The sturdy diecast aluminium housing is very suitable for high use situations such as shopping centres, supermarkets, fast food outlets etc. Fitted with

C0321

C0322 5 Pin XLR Dynamic Handheld Paging Microphone
  • WAS $99.00
  • $59.00
  • Price per each
SAVE
$40.00

Low Stock - Call to Confirm

5 Pin XLR Dynamic Handheld Paging Microphone

Designed for general paging applications where a traditional desktop paging microphone is impractical. The sturdy diecast aluminium housing is very suitable for high use situations such as shopping centres, supermarkets, fast food outlets etc. Fitted with

C0322

C0324 3 Pin XLR  Handheld Supermarket Paging Microphone
  • $119.00
  • 2+ $109.00
  • 4+ $99.00
  • Price per each

In Stock

3 Pin XLR Handheld Supermarket Paging Microphone

This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants.

C0324

C0325 5 Pin XLR  Handheld Supermarket Paging Microphone
  • $119.00
  • 2+ $109.00
  • 4+ $99.00
  • Price per each

In Stock

5 Pin XLR Handheld Supermarket Paging Microphone

This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants.

C0325

C0327 Gooseneck Supermarket Paging Microphone
  • $149.00
  • 2+ $129.00
  • 4+ $119.00
  • Price per each

In Stock

Gooseneck Supermarket Paging Microphone

This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants.

C0327

C0330B CB Type Curly 0.75m Microphone Lead With Bare Ends
  • $25.95
  • 2+ $23.50
  • 4+ $20.95
  • Price per each

In Stock

CB Type Curly 0.75m Microphone Lead With Bare Ends

0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice.

C0330B

C0331 CB Type Microphone 1.5m Lead With Bare Ends
  • $32.95
  • 2+ $29.75
  • 5+ $26.50
  • Price per each

In Stock

CB Type Microphone 1.5m Lead With Bare Ends

CB fist type microphone fitted with 1.5m curly cord (unstretched). Bare end connection for connection to OEM equipment or terminating with the connector of your choice.

C0331

C0332 CB Type Balanced Microphone With 5 Pin Mic Connector
  • $31.95
  • 2+ $28.95
  • 5+ $25.75
  • Price per each

In Stock

CB Type Balanced Microphone With 5 Pin Mic Connector

CB fist type microphone fitted with curly cord and standard 5-pin CB connector with a threaded locking collar. Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CBs, radio transceivers etc. Supplied complete with mounting clip. 300Hz - 6kHz frequency response.

C0332

C0333 CB Type Microphone With Bare Ends
  • $22.50
  • 2+ $20.25
  • 5+ $19.50
  • Price per each

In Stock

CB Type Microphone With Bare Ends

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335)

C0333

C0334 5 Pin XLR CB Type Balanced Microphone
  • $32.95
  • 2+ $29.75
  • 5+ $26.50
  • Price per each

In Stock

5 Pin XLR CB Type Balanced Microphone

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335)

C0334

C0335 CB Type Balanced Microphone With and Bare Ends
  • $26.95
  • 2+ $24.50
  • 5+ $22.00
  • Price per each

In Stock

CB Type Balanced Microphone With and Bare Ends

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz

C0335

C0336 CB Type Microphone Mounting Clip
  • $2.60
  • 2+ $2.30
  • 5+ $2.05
  • Price per each

In Stock

CB Type Microphone Mounting Clip

Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones.

C0336

C0337 12mm Lapel Microphone Windsock
  • $1.95
  • 10+ $1.80
  • 25+ $1.60
  • Price per each

In Stock

12mm Lapel Microphone Windsock

Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit.

C0337

C0338 8mm Windsock to suit C 8911A
  • $1.95
  • 10+ $1.80
  • 25+ $1.60
  • Price per each

In Stock

8mm Windsock to suit C 8911A

Used to negate breath noise and eliminate wind This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit.

C0338

C0339 Windsock to suit Altronics Aviation Headsets (Electret)
  • $5.00
  • Price per each

In Stock

Windsock to suit Altronics Aviation Headsets (Electret)

Suits all Altronics aviation headset microphones.

C0339

C0340 20mm Pencil Microphone Windsock
  • $1.95
  • 10+ $1.80
  • 25+ $1.60
  • Price per each

In Stock

20mm Pencil Microphone Windsock

Used to negate breath noise and eliminate wind or breath 'pop'

C0340

C0341 Windsock to suit C 9064 Altronics Aviation Headsets
  • $5.00
  • Price per each

In Stock

Windsock to suit C 9064 Altronics Aviation Headsets

Used to negate breath noise and eliminate wind or breath 'pop'

C0341

C0342 27mm Medium Microphone Windsock
  • $1.95
  • 10+ $1.80
  • 25+ $1.60
  • Price per each

In Stock

27mm Medium Microphone Windsock

Used to negate breath noise and eliminate wind or breath 'pop'

C0342

C0344 40mm Ball Microphone Windsock
  • $2.60
  • 10+ $2.30
  • 25+ $2.05
  • Price per each

In Stock

40mm Ball Microphone Windsock

Used to negate breath noise and eliminate wind or breath 'pop'

C0344

C0345 10mm Pencil Microphone Windsock
  • $1.95
  • 10+ $1.80
  • 25+ $1.60
  • Price per each

In Stock

10mm Pencil Microphone Windsock

Used to negate breath noise and eliminate wind or breath 'pop'

C0345

C0346 Windsock to suit C0375
  • $2.50
  • 10+ $2.25
  • 25+ $2.00
  • Price per each

In Stock

Windsock to suit C0375

Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm

C0346

C0347 Windsock to suit C0361
  • $10.95
  • 10+ $10.50
  • 25+ $9.95
  • Price per each

In Stock

Windsock to suit C0361

Used to negate breath noise and eliminate wind or breath 'pop'

C0347

C0348 Windsock to suit C8914
  • $1.95
  • 5+ $1.80
  • 10+ $1.60
  • Price per each

In Stock

Windsock to suit C8914

Spare windsock to suit

C0348

C0351A Boundary Mic Pro Electret
  • $179.00
  • 4+ $165.00
  • Price per each

In Stock

Boundary Mic Pro Electret

This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o

C0351A

C0353 2-Way Desktop Paging Microphone Intercom
  • $139.00
  • 2+ $129.00
  • Price per each

In Stock

2-Way Desktop Paging Microphone Intercom

A simple solution for paging individuals in a small area. Low power requirements, easy to install. Speaker/mic can be placed up to 3m away from the paging microphone.

C0353

All prices include GST.