|
Description |
Downloads |
Specs |
Ordering |
|
 |
C2163 |
|
|
|
Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre |
 |
C2164 |
|
|
|
Designed to be installed with the One-Shot ceiling speakers, these ceiling ring supports the ceiling tile to minimise sag and reduce damage to soft tiles. Recommended for use with mineral fibre and acoustic ceiling tiles. Split ring design for |
 |
C2165 |
|
- Overall Dimensions: 590 mm x 155 mm
- Hole Diameter: 140 mm
|
|
Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre |
 |
C2168C |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. |
 |
C2169 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. |
 |
C2170 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- White flame retardant ABS grille (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2171 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- Black flame retardant ABS grille (Taitalac 8540T)
- Black flame retardant ABS spring clips (Cycoloy C2950HF)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2172 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2174 |
|
- Power rating: 45W 8Ω
- SPL 1W @ 1m: 92dB
- Freq response.: 40Hz - 20kHz
- Grill Type: Aluminium
- Mounting hole: 237Ø approx
- Colour: Black
|
|
The C 2174 is a 200mm (8") 8&Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications |
 |
C2178 |
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Grille: Aluminium
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 238mmØ
- Mounting depth: 95mm
- Transformer cover: No
- Cable restraint: No
|
|
The C 2178 is a 200mm (8") high performance 45W coaxial speakers fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' |
 |
C2179 |
|
- Size: 165mm
- Colour: White
- Speaker Type: 8 Ohm Coaxial
- Grille: Steel
- Power Taps (Watts): 30W
- Frequency Resp: 65Hz - 20kHz
- SPL 1W@1m: 90dB
- Cutout: 195Ø
|
|
Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install. |
 |
C2181 |
|
- Magnetic fit ‘edge to edge’ steel grille for a neat flush finish.
- High power output.
- Excellent speech intelligibility and music reproduction.
- Coaxial driver for excellent high end frequency response.
- Flip-lock mounting system reduces installation time.
- 5 year warranty.
|
|
The C 2181 is a 200mm (8") 8 amp Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a "Flip-Lock&" mounting system. Typical applications |
 |
C2184 |
|
- Size: 200mm
- Colour: White
- Speaker Type: 100V line twin cone
- Grille: Steel
- Power Taps (Watts): 0.33, 0.66, 1.25, 2, 5W
- Frequency Response: 100Hz - 15kHz
- SPL 1W@1m: 89dB
- Terminal Type: 4 way screw terminal block & 22µF bipolar capacitor
- Ceiling Cutout: 250mmØ
- Mounting Depth: 77mm
|
|
This speaker is a stylish, high performance, architecturally unobtrusive speaker/grille combination which can be painted to match decor. It also features a magnetic fit "edge to edge" steel grille for a near flush finish |
 |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
 |
C2188 |
|
- Power taps: 1.25, 2, 5, 10, 15 watts
- SPL 1W @ 1m: 92dB @ 1kHz ±3dB
- Freq response: 70Hz - 20kHz
- Terminal type: 2 way screw terminal block
- Grille Steel
- Ceiling cutout: 204mm Ø
- Mounting depth: 126mm
|
|
Features a magnetic fit 'edge to edge' steel grille for a near flush finish. |
 |
C2190 |
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
Features a magnetic fit 'edge to edge' steel grille for a near flush finish. |
 |
C2191 |
|
- Power rating: 30 Watts
- Power taps: 3.75, 7.5, 15, 30 Watts
- SPL 1W @ 1m 89dB
- Freq response: 75Hz - 25kHz
- Ceiling cutout: 220mm Ø
|
|
Designed for foreground & sound reinforcement applications, this speaker employs a high quality 6.5" 2-way polypropylene driver, along with an enclosure which is ported and damped for excellent bass response. The 0.75" waveguide coupled tweeter gives smoo |
 |
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
 |
C2260A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2261 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Black RAL9004 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. |
 |
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
 |
CC2099 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility; which is h |
 |
CF2134 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2134 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
