|
Description |
Downloads |
Specs |
Ordering |
|
 |
Z6302K NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 8GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
|
Z6302J NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 4GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
 |
K8672 NEW
|
|
- Build more than 100 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 23 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organise the building blocks based on the colour and size.
|
|
The Robot Master sets supports the building of up to 200 different robotic projects from simple to complex, allowing kids to progress their STEM skills up with staged lessons. |
 |
ZR6302G |
|
- On board on/off power button
- Integrated fan control forthermal management
- Dual-display support
- Two micro-HDMI ports
- Supports display resolutions up to 4K @ 60hz (1 x 2K up to 1440P@60, 1 x 4K 2.0 up to 4k@60)
- Multiple connectivity capabilities so less add on hardware required, including Bluetooth 5.0 with BLE, Gigabit Ethernet & Wireless LAN
- A 40P GPIO expansion header provides extensive compatibility with a wide range of accessories
- Get more multiple memory options, including 4GB RAM and a speed eMMC socket
- Compatible with most R-Pi 4 accessories, including cases, cameras and HAT modules
|
|
The ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. |
 |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
 |
Z6427 |
|
|
|
A handy Wi-Fi activated relay module for Arduino and other development applications. |
 |
H8952A |
|
- Sleek minimal design
- 2 x Standard 'type A' HDMI ports
- Aluminium Alloy top for passive cooling
- Programmable 30mm fan
- Clean Power Shutdown
- Multi-function power button
- Power management modes (with Always ON)
- Magnetic top access to GPIO pins
- Colour coded GPIO pins
- Easy installation
|
|
This Raspberry Pi 4 Argon ONE V2 Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
H8967 |
|
|
|
Allows mounting of your Pi to the rear of a monitor using standard 100mm spacing VESA bolt holes. Made from laser cut acrylic plastic. Internal fan for added cooling. |
 |
K8620 |
|
- Easy to level
- Build volume 120 x 65 x 165mm
- Stable Z axis design
- All metal chassis
- 3.5” touchscreen user interface
- Easy clean resin vat design
- Ultra HD UV LCD screen
- 4K/8X anti-aliasing for a smooth finish on prints
- 0.02-0.05mm accuracy
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
H8932 |
|
- Texas Instruments PCM5122 - 192kHz Sampling Rate/24bit Resolution DAC with 112-db SNR
- Using I2S bus, it separates clock and serial data signals resulting in a lower jitter
- Infrared and remote control via app
- Plays dsd, mp3, wav, wma, aac an many streaming services, airplay and bluetooth casting
- Supports OS, Volumio, Roon, Moode, Raspbian and many more
|
|
Turns your Pi into a high resolution network music player for MP3, FLAC, ALAC, WAV, AAC, FLAC, DSD, Audio CD and many more file types. On-board DAC for very high quality audio output. The ideal home music server for the audiophile! All aluminium case provides excellent cooling for your Pi 4. |
 |
H8931 |
|
- M.2 SATA SSD Compatibility | Accepts any size of M.2 SATA SSD with Key-B or Key-B&M
- UASP Supported for Raspberry Pi 4 | Maximizes the high speed data transfers for Raspberry Pi 4
- Usable for all Argon ONE Cases | Simply replace the bottom with the expansion board, and SSDs will be usable (works best with Raspberry Pi 4 Cases)
|
|
SATA expansion can be screwed onto the bottom of the case to provide support for M.2 SATA SSD drives. |
 |
H8930 |
|
- Supports a single SSD drive
- Accepts M.2 SSD NGFF Key B and Key B+M
- SSD Size: NGFF M.2 2280 2260 2242 2230
- Chipset: ASMedia Technologies - ASM1153E
- Compliant with USB3.0 Specification Revision 1.0
- Up to 6Gbps transfer speeds
- 2 Standard (type A) HDMI Ports
- Aluminium Alloy Top for Passive Cooling
- Programmable 30mm Fan
- Programmable IR Receiver
- Clean Power Shutdown
- Multi-Function Power Button
- Power Management Modes (with always ON)
- Magnetic Top Access to GPIO Pins
- Colour Coded GPIO Pins
- Easy Installation
|
|
A R-Pi 4 enclosure supporting one M.2 SATA SSD drive, plus two full size HDMI ports, power management modes and built in IR control support. Features both active and passive cooling from an internal fan and aluminium heatsinking case. |
 |
H8953 |
|
|
|
A retro gaming styled Pi 4 case providing excellent cooling performance and easy access to all of the Pi’s ports. Ideal for RetroPi gaming projects. Internal fan for added cooling. |
 |
X3035 |
|
|
|
Create your own family world cup with these fun football
robots. 2 players included with pitch (1m x 0.8m), goals, ball and cones. |
 |
Z6426 |
|
- Supports standard frame, extended frame of transmission and reception; support two receiving methods: Polling and interrupt
- Provide various interfaces, such as U-Art, I2C, DB9 connector, etc.
- Support SD card data storage
- Support power supply via Arduino motherboard or DB9 connector
|
|
The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices. |
 |
Z6385A |
|
- Microcontroller: ESP-WROOM-32 module
- USB to Serial Port Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Current Supply: 500mA (Minimum)
- Operating Temperature Range: -40℃ ~ +85℃
- WiFi mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi frequency range: 2.4 GHz ~ 2.5 GHz
- Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm*26mm*13mm
- Weight: 9.3g
|
|
This board features a powerful ESP32 dual core microcontroller that has wifi and bluetooth. This allows it to have the ability to be programmed with the Arduino IDE. |
 |
X3099 |
|
- Up to 20m remote controlling distance with the 2.4GHz high frequency signal
- Handheld remote control watch
- Plays beats (can be turned off)
- Dance Mode
- Performs Drifts
- Cool and fast 360-degree rotation on the spot
- Drives fast and reacts rapidly
- LED lights
- Easy to learn how to control
|
|
Perform awesome stunts with this remote control drifter stunt car. You can enjoy the feature of drifting and 360° spinning. A great gift idea for birthday and Christmas presents. |
 |
P1021 |
|
|
|
Keeps your cables neater, peel off as many as you need for prototyping your design. Pin to socket type. 175mm. |
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
K1096 |
|
- Easy to control 8-way joysticks
- Convertible Grippers
- Horizontal and vertical gripper joint
- Racing-car power switch with additional safety lock
- Openwork chassis design
- Visible mechanical rods and running gears
- Suitable for ages 10+
|
|
Looking for a unique robotic arm with exclusive features? This innovative arm will definitely surprise you. Unlock the safety switch and press on the red racing-car power button, the robotic arm directly enters stand-by mode and the rumbling of operation leads you the way to a mechanical gaming experience. |
 |
H8952 |
|
- Sleek minimal design
- NUC-like design (all connectors are brought around to one side).
- Excellent WiFi signals thanks to the plastic base
- Brilliant passive cooling (the whole top part of the case is a heatsink)
- Built-in fan with programmable speeds
- Power button with soft-shutdown
- Accessible GPIO with colour coded pinout
|
|
This Raspberry Pi 4 Argon ONE Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
H8959 |
|
- Anodised aluminium
- Heatsink fins
- Thermal pads
- Dual 5V fans
- Easy assembly
- Very quiet
- Made for the Raspberry Pi 4
- All ports, pins & connectors accessible
- Hex bolts & Allen key included
|
|
This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model B. Features dual cooling fans. |
 |
H8954 |
|
- Anodised aluminium top and bottom case
- Heatsink fins
- Thermal pads
- Hex bolts and hex key
- Access to all ports, pins, and connectors
- Compatible with Raspberry Pi 4
|
|
This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model B. It is a great passive cooling case to help raspberry pi 4 board cooling down. |
 |
Z6387 |
|
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports OV2640 and OV7670 cameras with built-in flash
- Supports for images WiFI upload
- Supports TF card
- Supports multiple sleep modes
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss One-click distribution network
- Supports for serial local upgrade and remote firmware upgrade (FOTA)
- Supports secondary development
|
|
A WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. |
 |
H8965 |
|
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
|
|
A compact, snap together black and grey case to suit the Raspberry Pi 4 Model B development board. Designed with all connection recesses and venting. |
