|
Description |
Downloads |
Specs |
Ordering |
|
|
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
|
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
|
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
|
S9365A NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF S/T support
|
|
This multi-channel network video recorder offers 8MP (4K) resolution recording at 25fps per camera. |
|
M2165C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 60VA
- Insulation: Class E (120°C)
- Magnetising current: <85mA
- Temperature rise: <65°C
- Regulation: ˜10%
- Recommended primary AC fuse: 500mA
- Weight: ˜1.4kg
- Primary connection: 200mm fly leads
- Secondary connection: Solder tags
|
|
Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for A |
|
F1158A NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Motor Protection: Impedance protected
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 119.7g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 225mA (230mA max)
- Input Power: 4.6W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2900/3000 RPM ±20%
- Air Flow: 52/54 CFM
- Static Pressure: 0.12/0.14 Inch-H2O
- Noise Level: 31/32dB(A)
- Insulation Resistance: 10MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Connection: Flying Lead
Air Flow: 52CFM
Input Power: 4.6W
Input voltage: 240VAC
Input current: 220mA
Speed: 2900 RPM
Noise Level: 31dBA
Material: Thermoplastic
Size: 92 x 92 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
|
SA0456 NEW
|
|
|
|
Battery snap clip to suit 9V batteries. These can also be used to connect to some of our battery holders which include an integral battery snap. |
|
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
|
P1024A NEW
|
|
|
|
Handy test leads. Pack of 10. Contains: two of each yellow, red, white, black and blue |
|
B0224 NEW
|
|
|
|
The 32nd edition of our electronics catalogue, featuring our entire range of products including audio visual, pro audio, speakers, security, test equipment, tools, technology, kits, lighting, power, solar, transformers, hardware, components, switches, connectors and cable! |
|
T4002B NEW
|
|
|
|
Elastic adjustable wrist strap allows full freedom of movement while protecting components from static damage. |
|
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
|
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
|
D2384 NEW
|
|
|
|
This cable allows you to connect Lightning equipped devices to USB C ports for charging, data transfer etc. Length: 2m |
|
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
|
T1286A NEW
|
|
|
|
Selection of tips to suit the T 1285A |
|
A2260SS NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
|
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
|
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
|
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
|
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
|
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
|
X3229 NEW
|
|
- Simple installation anywhere with adhesive backing.
- Switches on automatically when motion is detected.
- 30 second "on" time.
- Fully self contained - no wiring required.
- Ideal for cabinets and wardrobes.
- Requires 4 x AAA batteries.
|
|
This affordable LED strip sensor light includes 1m of adhesive backed warm white LED strip and a PIR simple motion detect controller. It is ideal for wardrobes, cupboards and storage areas where LED lighting is only required when you open the door. |