|
Description |
Downloads |
Specs |
Ordering |
|
|
A3607 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts a HDMI source device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
These wireless extension cables provide a simple way to send 1080p 60Hz signals from a HDMI source device to TV or monitor in another room up to 50m away (line-of-sight). |
|
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
|
Q0203B NEW
|
|
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronising Signal + External Trigger
- Easy to use button layout
- Large and clear 7” true colour 24-bit display
- Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
- Huge selection of auto measurement functions
- Powerful trigger functions: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
- Integrated USB host, support USB disk storage, USB interface system update
|
|
Perfect for those in R&D, product development or service of complex electronic equipment. This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). |
|
D0863 NEW
|
|
- Long life LiFePO4 battery with up to 10 year service life
- Silent operation for use in any environment
- Auto restart when AC recovers without any interaction by the user
- High efficiency fan-less design reduces heat
- Wall/surface mountable brackets
- Optional external web/SNMP card for remote monitoring
- 5 year warranty with local support through PowerShield
|
|
Designed for Australian conditions the Ninja Slimline UPS features Lithium Iron-Phosphate (LiFePO4) battery technology to allow the UPS to operate continuously at up to 40 degrees celcius without reduction in battery life. At 42mm in height, the Ninja Slimline is the perfect UPS for compact spaces. |
|
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
|
Z6424 NEW
|
|
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
|
|
The Raspberry Pi Pico W is perfect for IoT and wireless projects, better still, it's such an affordable 32-bit microcontroller that is packed with peripheries including WiFi. |
|
P8166 NEW
|
|
- 240V AC 10A outputs.
- 7 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- High surge protection.
- Overload protection.
- Power cord located at the rear for less interference.
- 19” rack ear mounting.
|
|
The neat solution to supplying mains power to your mounted equipment. |
|
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
|
A4022 NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
|
T1534B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Removable handles for compact storage
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. 6mm2 to 50mm2. Commonly used for making high current battery leads in solar installations. 387mm length. |
|
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
|
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
|
T1463 NEW
|
|
- Sturdy steel base with recesses for dry tip cleaner, rosin flux and cleaning sponge.
- LED magnifier provides a crisp clear view.
- Non-slip rubber feet on industrial powdercoated metal base.
- Powered by USB C - cable included.
- Solder reel holder in-built.
- 4 segmented arms which stay in place when positioned.
- Rubber tipped spring clamps secure your parts in place while working.
- Includes dry tip cleaner, container of rosin tip flux, cleaning sponge and USB A to C power cable.
|
|
This handy bench top helper features an LED magnifying lamp, plus 4 flexible arms for keeping items in position when working on them, making it ideal for soldering cables, PCBs and a range of hobbyist uses. |
|
X2920 NEW
|
|
- Compact, low profile design
- Rugged aluminium housing
- Weatherproof IP68 rated
- Suitable for both 12V and 24V applications
- 3 x 5W high brightness LED chips
|
|
DC vehicle lighting for 4WD's, boats, trucks and trailers. Rugged aluminium casing and ultra bright light output. |
|
X7100 NEW
|
|
- Jumbo clock digits - read up to 30m away!
- Calendar display.
- Day of the week display.
- Temperature & humidity display.
- Programmable alarm with snooze function.
|
|
This handy jumbo LCD 12/24 hour clock, thermometer and calendar is great for around the home or office. The extra large clock digits allow it to be read up to 30m away. The screen also provides date, day of the week, temperature and humidity readings. |
|
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
|
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
|
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
|
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
|
P8164 NEW
|
|
- Great for the workbench - connect your mains devices and charge your smart devices!
- USB C PD charging - 20W.
- USB A Type charging (max 2.1A).
- 10W wireless charging in-built for your phone.
- 2 standard GPO outlets.
- Compact low profile case.
- 1.5m mains connection cable.
|
|
Ideal for the work bench, this 2 way power extension board features 2 x type A USB chargers and 20W USB type C PD charging output. Plus a 10W wireless charger holder to keep your phone charged up while you work. |
|
P7780A NEW
|
|
|
|
A 3 pole DC plug in the style of the SB50 Anderson connector. |
|
K8610 NEW
|
|
|
|
This high performance 3D printer with a more aesthetic, streamlined design, features a brand new nozzle made of brass that can stand up to +300°C printing temperature and is compatible with PLA, ABS, PVA, TPU, PA, PETG and wood. |
|
T1285A NEW
|
|
- Power: 320W
- Voltage: 220-240V 50Hz
- Air pump: Diaphragm pump
- Capacity: 24L/min (max)
- Hot air temperature: 160-480°C
- Sensor: K thermocouple
|
|
This re-work station provides a quick and easy way to rework boards fitted with surface mount devices. |
|
S2692A NEW
|
|
- Continuous Rating: 275A at 12VDC (200A at max 50VDC)
- Cranking Rating: 1250Amps at 12VDC (1000A at max 50VDC)
- Terminal Size: M10
- Electrical Life: >10000 cycles
- Dimensions: 68 x 68 x 75 mm
|
|
Rotary on/off master switch for high current DC circuits and battery banks. |
|
A4024 NEW
|
|
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
|
S2695A NEW
|
|
- Continuous Rating: 275A at 12VDC (200A at max 50VDC)
- Cranking Rating: 1250Amps at 12VDC (1000A at max 50VDC)
- Terminal Size: M10
- Electrical Life: >10000 cycles
- Dimensions: 68 x 68 x 75 mm
|
|
Four way rotary battery bank selector. Switch selections are, bank 1, bank 2, bank 1 & 2, OFF. |
|
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
|
S9344P NEW
|
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
|
|
This 4 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). |
|
D0520 NEW
|
|
- High 65W output for high capacity devices such as laptops
- 20,000mAh capacity
- 74Wh capacity - OK for air travel
- USB type A and type C outputs on front panel
- Study aluminium casing.
|
|
This 20,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
|
D2208A NEW
|
|
- Qi Wireless Charging
- Motorised to fit your phone automatically
- Comes with a USB Type C lead
- Safely use navigation apps in the car
- Air vent spring mount
- Suction cup mount
|
|
This 15 Watt Qi Wireless Charging Universal Phone Car Mount will not only charge your phone with its wireless fast charge feature but it will also allow you to safely use navigation apps in the car. |
|
D0521 NEW
|
|
- High 100W output for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
|
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
|
T2488A NEW
|
|
- We recommend the use of high quality Iroda butane gas for use in all Iroda gas powered products. Inferior or lower grade butane may contain a higher level of impurities which will block the internal microscopic filters faster causing intermittent or complete failure.
|
|
A handy fliptop keyring blowtorch, ideal for those quick jobs on the go! Easy one hand operation with adjustable 1300 degree C flame, one click piezo ignition and easily refillable with butane gas. |
|
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
|
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
|
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
|
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
|
A1117 NEW
|
|
- Compact Class D stereo 2 x 15W (into 4Ω)
- Bluetooth 5.1 connectivity
- Upgrade your favourite speakers to Bluetooth wireless
- Includes mains power supply
- Excellent range and audio clarity
- Suitable for in-ceiling mounting
- Assignable bluetooth device name and password
|
|
This Bluetooth mini amplifier is a great way to add wireless connectivity to a new or existing pair of ceiling or wall speakers that aren't Bluetooth equipped. It offers Bluetooth 5.1 connectivity for excellent device range and audio performance, coupled with an efficient Class-D amplifier. |
|
X0604C NEW
|
|
- FM transmitter
- Easily portable
- Dual USB car charger
- USB Port for playing music
- Car battery voltage monitor
|
|
Make hands-free calls and play music directly through your car speakers via FM radio. |
|
K8615 NEW
|
|
- 7.9" 4K mono LCD
- Self-developed integral light source
- High performance mainboard
- Z-axis with dual linear rails
- 5" HD touch screen
- Air filtration system
- Multiple slicing software
- Supports Creality Cloud APP
- Supports OTA updates
- Compatible with HALOT-BOX Lychee and CHITUBOX
|
|
The large 7.9" 4k mono LCD screen with a resolution of 4320*2560, vividly prints out every detail. With an upgraded 172 x 102 x 160mm build volume, it has a 73% volume increase compared to the 6" LCD and supports both smaller or larger models. |
|
K9641 NEW
|
|
|
|
An assortment of straight pin boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties (10 of each plug and socket). Plus crimp pins to suit plug housings. 150pcs total. |
|
M8066 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
|
S9721A NEW
|
|
- USB to RS485 communication
- Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- 3 LEDs for indicating the power and transceiver status
|
|
The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. |
|
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
|
P8064 NEW
|
|
|
|
A handy gland cable entry point for caravans, campers and vehicles with roof mounted solar panels. Can be surface mounted using silastic or similar weatherproof adhesive. PG13.5 cable gland with 7.5mm cable entry (prior to tightening). Size: 60W x 112D x 35Hmm. |
|
Z6433 NEW
|
|
- XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
- 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
- Bluetooth, LE: Bluetooth 5, Bluetooth mesh
- 8 MByte(64Mbit) SPI Flash
- 384 KByte ROM
- 512 KByte SRAM
- 8 MByte(64Mbit) SPI PSRAM
- 16 KB SRAM in RTC
- Communication Interfaces: 2 x I2C, 2 x I2S, 4 x SPI, 3 x UART, 1 x USB OTG
- Security: 4096 bit OTP, AES, SHA, RSA, ECC and RNG, Secure boot, Flash encryption, Digital signature, HMAC module
- Dual Type-C USB connectors
- Reset and User/Firmware buttons
- RGB WS2812 User LED
- Power LED
- Virtual USB port provided by CP2102 for debugging and firmware upgrade
- Compact size of 50.1 x 13mm
- Supply Voltage: 5V via USB
- Circuit Voltage: 3.0 to 3.6V Circuit Operation
|
|
The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM(ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. |
|
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
|
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
|
S5158C NEW
|
|
- Recessed steel door switch set
- Self locking
|
|
A concealed magnetic reed switch designed for use with metal door frames. |
|
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
|
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
|
S4737A NEW
|
|
- Nominal Capacity: 3500mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 3350mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1700mA
- Charging Time: Standard charge : 4hours
- Max. Charge Current: 2000mA (ambient temperature 25°C)
- Max. Discharge Current: 8A (continuous discharge)
- Discharge Cut-off Voltage: 2.65V
- Cell Weight: 50.0g max
- Cell Dimension: Height: 65.25mm max, Diameter: 18.55mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -10 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
|
M8623C NEW
|
|
- Standard USB charging and QC 3.0 charging ports.
- Easy to use - just plug in and turn on your ignition to charge.
- Great for keeping your devices charging whilst in the car.
- Sleek design with light up ring so you can find it at night.
- Battery voltage meter in-built.
|
|
This dual charger allows you to power up to two devices in your car. Max combined current output is 5.5A. |
|
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
|
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
D2321 NEW
|
|
|
|
A stylish bedside or desktop radio alarm clock with in-built 15W wireless charging for your phone. |
|
D2045 NEW
|
|
- RGB beat triggered lighting with multi colour modes
- USB port & micro SD slot for MP3 playback
- True Wireless Stereo function - pair two together for stereo sound.
- Internal 1200mAH battery
- 10W RMS output power
- 5hr playback time
- Internal microphone
- Portable lightweight design
- Integral strap
|
|
This True Wireless Stereo (TWS) equipped bluetooth speaker provides tunes where ever you travel. It features dual 2” full range drivers and bottom mount bass driver for a full rich sound. |
|
D2202 NEW
|
|
- Clips to your car air vent
- Secure rare earth magnetic pad
- Includes 4 metal adhesive backed discs for your phone
- Suits most horizontal air vents in vehicles
|
|
This universal air vent mount allows you to safely use navigation apps in the car. |
|
T2125 NEW
|
|
- 5000 to 25000 RPM in 5K RPM steps.
- Ideal for crafts, hobbies and odd jobs around the house.
- Compact design fits easily in the hand.
- USB type C recharging.
- Up to 1 hour use per charge.
- Spindle lock for easy change over of accessories.
- 42 accessories included.
- Snap lid carry case.
|
|
Drills, cuts, sharpens, cleans, polishes and engraves most surfaces, this rotary tool is ideal for enthusiasts, craft & hobby makers, or just odd jobs around the house. |
|
T1512B NEW
|
|
- ABS case coating with rubber TPR
- Light weight, compact, cost-effective, easy to operate.
- Optional stripping blade for different AWG cables
- The cassette can be reversed to change coaxial cable
- Easy to adjust with thumb screw
- Spring loaded with locking clip
|
|
These hardened carbon steel wire strippers are designed to strip 10-22AWG (0.3-5mm2) stranded and 14-24AWG solid core cable. Spring loaded with locking clip. |
|
P7740 NEW
|
|
|
|
Anderson style grey 120A DC power connector. |
|
S8871C NEW
|
|
- Low blue light/flicker free
- AMD FreeSync technology
|
|
A perfect all around display with stunning images that stretch from edge to edge. Features a compact slim design that will look smart in any space. |
|
A4026 NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024. |
|
D5508A NEW
|
|
- Designed for direct insertion of one 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Touch Control ON/OFF switch
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support UASP (USB Attached SCSI) for Windows 8 and above, Mac OS 10.8 and above
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.4 and above, Linux.
|
|
Take advantage of the latest high speed USB 3.0 transfer rates with this 2.5/3.5 SATA drive docking station. The dock station allows for a high effective heat dissipation. It offers swappable access to 2.5" and 3.5" SATA HDD/SSD without having to mount the hard drive or install it in an enclosure. |
|
A4937 NEW
|
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Bluetooth audio streaming receiver in-built
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music. |
|
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
|
S4732A NEW
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
ZR6479 NEW
|
|
- Cable Type: MIPI DSI Adapter Cable
- Cable Length: 0.1m
- Colour: Orange
|
|
Connect a MIPI display to a ROCK single board computer with this MIPI DSI Display Adapter Cable. |
|
P1968 NEW
|
|
- Superspeed USB+ 10Gbps transfer speeds
- 100W power delivery for fast recharging of devices
- 3m length
- Ideal for connection to USB hubs with multiple peripherals
- Suitable for high resolution monitors and external drives requiring high data speeds
|
|
This type-C to type C USB cable features USB 3.2 Gen 2 compatibility and can be used to connect and power a variety of USB type C equipped devices. |
|
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
|
K8601 NEW
|
|
- Double sided PEI coated plate
- Excellent flatness & elasticity
- Strong adhesion
- Durable and long lasting textured plate
|
|
Double sided black textured PEI spring steel magnetic build plate to suit 3D printer models K8600 & K8602 |
|
M8025 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
A3247 NEW
|
|
- Supports four 4K @ 60Hz sources.
- Combines up to four sources onto one display.
- RS-232 controllable via third party software.
- Audio extraction via S/PDIF & stereo RCA.
- HDMI 2.0b, HDCP 2.2/1.x compliant.
- 18Gbps video bandwidth.
- Up to 8 display modes.
- Seamless display switching.
- EDID management.
- Includes IR remote.
|
|
This product is designed for the purpose of connecting four 4K @ 60Hz UHD HDMI sources, and displaying each on a single display |
|
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
|
M8027 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
P8600C NEW
|
|
- EN50521:2008 approval suitable for AS/NZS 5033:2012 standard.
|
|
Water & dust proof - IP68 rated. Commonly used on photovoltaic solar panel arrays. Fully sealed design is suitable for use in exposed installations. Rated 30A |
|
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
|
S9265A NEW
|
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x USB C Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. USB C 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
|
M8969 NEW
|
|
- MEPS efficiency level V
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC 2A switch mode plug pack. |
|
S4736A NEW
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 47.0g max
- Cell Dimension: Height: 65.00mm max, Diameter: 18.40mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
F1162 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 146mA
- Rated Power Consumption: 3.5W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2700 RPM ± 10% at rated voltage
- Air Flow: 93 CFM
- Static Pressure: 0.22 Inch-H2O
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B2-0000-A99) with thermoplastic frame. |
|
MB8968C NEW
|
|
- MEPS efficiency level V
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC, 1 Amp switch mode plug pack. Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). |
|
S9367D NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
|
S9833B NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- With Internal POE and External SD Card Slot
|
|
This compact 8MP dome/turret camera utilises a 1/2.8' SONY Starvis Back-Illuminated CMOS Sensor for a crisp clear view day or night. |
|
M8994A NEW
|
|
- Slimline and lightweight case design reduces the need to carry bulky chargers around.
- 112W power delivery 2.0 output for modern USB C type devices.
- Auxiliary USB type A charging output (2.4A max).
- Compatible with a wide range of brands and models which utilise USB C type charging.
- Wide AC input range (100-240V AC) allows overseas use when paired with standard travel adaptors.
- Includes power cable.
|
|
This slim & lightweight 112W USB-C power delivery (PD) charger offers fast recharging for MacBooks, Nintendo Switch and other type “C” devices. |
|
PB8264 NEW
|
|
|
|
All feature 10A overload circuit breaker and 0.9m lead. Black. |
|
P1967 NEW
|
|
- Superspeed USB+ 10Gbps transfer speeds
- 100W power delivery for fast recharging of devices
- 1m length
- Ideal for connection to USB hubs with multiple peripherals
- Suitable for high resolution monitors and external drives requiring high data speeds
|
|
This type-C to type C USB cable features USB 3.2 Gen 2 compatibility and can be used to connect and power a variety of USB type C equipped devices. |
|
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
|
P7888 NEW
|
|
|
|
World famous IP67 weatherproof pluggable connectors for automotive and industrial wiring. Supplied in a set including crimp pins, gasket, male and female connector bodies. DE-DT8-1. |
|
F1163 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 207mA
- Rated Power Consumption: 5.0W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ± 10% at rated voltage
- Air Flow: 108.2 CFM
- Static Pressure: 0.28 Inch-H2O
- Acoustic Noise: 44.5dB (A)
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B1-0000-A99) with thermoplastic frame. |
|
Z6296 NEW
|
|
|
|
Get your brand new Raspberry Pi Zero 2 W with most of the essentials in this kit. |
|
A2516 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 0.19Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +18dBm
- Note the RCA input sockets are in parallel
|
|
Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control. |
|
S9750A NEW
|
|
- Input Voltage: 17-28V AC, 18V-32V DC
- Input Current: 24V AC 2.0A
- Output Voltage: 12V DC +/- 2% Regulated
- Output Current: 2.0A max
- Size: 57.5 x 32H x24D mm
|
|
This adaptor will convert 17-28V AC or 18-32V DC to a regulated 12V DC 2A output suitable for security cameras. |
|
P8034 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
A double width wallplate with matching fascia cover. |
|
A6541 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
|
T1533B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. |
|
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |