|
Description |
Downloads |
Specs |
Ordering |
|
|
T4002B NEW
|
|
|
|
Elastic adjustable wrist strap allows full freedom of movement while protecting components from static damage. |
|
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
|
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
|
D2384 NEW
|
|
|
|
This cable allows you to connect Lightning equipped devices to USB C ports for charging, data transfer etc. Length: 2m |
|
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
|
T1286A NEW
|
|
|
|
Selection of tips to suit the T 1285A |
|
A2260SS NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
|
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
|
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
|
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
|
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
|
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
|
X3229 NEW
|
|
- Simple installation anywhere with adhesive backing.
- Switches on automatically when motion is detected.
- 30 second "on" time.
- Fully self contained - no wiring required.
- Ideal for cabinets and wardrobes.
- Requires 4 x AAA batteries.
|
|
This affordable LED strip sensor light includes 1m of adhesive backed warm white LED strip and a PIR simple motion detect controller. It is ideal for wardrobes, cupboards and storage areas where LED lighting is only required when you open the door. |
|
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
|
SA0915 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
|
D4455 NEW
|
|
- Wide Frequency Band supporting all mobile carriers
- Low Insertion Loss
- Low VSWR
- High Isolation
- Widely used in IBS & DAS
|
|
The Blackhawk range of power splitters are ideal for connecting multiple devices to a single antenna. Ideal for M2M modems, mobile broadband routers, and USB modems with external antenna ports. |
|
D4456 NEW
|
|
- Wide Frequency Band supporting all mobile carriers
- Low Insertion Loss
- Low VSWR
- High Isolation
- Widely used in IBS & DAS
|
|
The Blackhawk range of power splitters are ideal for connecting multiple devices to a single antenna. Ideal for M2M modems, mobile broadband routers, and USB modems with external antenna ports. |
|
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
|
P8034 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
A double width wallplate with matching fascia cover. |
|
P1816B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 15m - Category 6 |
|
P1817B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 20m - Category 6 |
|
P1818B NEW
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Blue 30m - Category 6 |
|
SA0912 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |