30W 3 Input 100V Public Address (PA) Amplifier

This PA amplifier has been designed to meet the requirements of small to medium sized professional public address installations. Frequency response extends from 40Hz to 10kHz at a total harmonic distortion (THD) of less than 0.5%. Features such as push to talk (PTT) auxiliary muting, three combined balanced line microphone / stereo line inputs, tape out, and separate bass and treble controls give this amplifier a wide scope of installation applications, including schools, public halls, workshops and sporting complexes. Output may be 100V line or low impedance (8 - 16Ω) speaker loads. This unit features thermal overload shutdown, over current and short circuit protection.
Vox muting: The VOX circuit allows telephone paging via line input one or two (selectable internally). When paging via the telephone, all other line inputs are muted (ie. background music). Features variable sensitivity and time delay settings.

Features

• 3 Inputs suitable for either microphone or line level, or for use as microphone and line level coupled together.
• Bass and treble controls (on both microphone and auxiliary inputs).
• Full 30W RMS output (100V and 4 -16Ω outputs).
• Push to talk muting.
• Protection against over-voltage, over current, thermal run-away and short circuit load.
• Internationally accepted IEC mains socket (240V AC operation only).
• Stereo RCA sockets for all auxiliary inputs (configured to mono internally allowing standard stereo equipment to be directly connected).
• Fully balanced microphone inputs.
• Tape output, suitable for recording, or for connection to a second amplifier.
• Ten year warranty.

100% developed, designed & assembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products

Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.

• Altronics Code: A4031C
• I/N: 16387
• Barcode: 9321758235232
• Shipping Weight: 4.40000Kg
• Packaging Sizes
• EACH: 1
• LAYER: 10
• PALLET: 150
• Printed Catalogue Page 44
• Large Image 1
• Large Image 2
• Instructions
• Brochure

• General
• Power Output:. 30 Watts RMS
• T.H.D.: typically < 0.5% @ 1kHz
• Frequency Response:
• Microphone: 52Hz - 10kHz, ±3dB
• Auxiliary: 40Hz - 10kHz, ±3dB
• Speaker Outputs: 100V (330Ω) (floating) or 8 - 16Ω (0V referenced)
• Noise Level: All volume controls min: Typically 76dB below rated output (All inputs display same signal to noise ratio)
• Dimensions: ≈ 300W x 220D x 80H mm
• Weight: ≈ 4.1kg
• Colour: Black
• Accessories: IEC Mains Lead
• Output Connectors
• Speakers: Screw Terminals
• Tape Output: RCA Stereo Socket
• Input Sensitivity
• Mic 1: 2.6mV Balanced or 3.2mV Unbalanced
• Mic 2: 2.6mV Balanced
• Mic 3: 2.6mV Balanced
• Aux 1: 150mV
• Aux 2: 150mV
• Aux 3: 150mV
• Muting
• PTT Via Microphone
• Switch Contacts
• or Optional VOX Muting
• -79dB below rated output
• Input Connectors
• Mic 1: 5 pin DIN balanced or 3 pin XLR balanced or 6.35mm jack unbalanced
• Mic 2: 3 pin XLR balanced
• Mic 3: 3 pin XLR balanced
• Aux 1: RCA Stereo Socket
• Aux 2: RCA Stereo Socket
• Aux 3: RCA Stereo Socket
• 240V AC Power: IEC Type Chassis Socket
• Controls
• Input 1 (Mic 1 / Aux 1): Volume
• Input 2 (Mic 2 / Aux 2): Volume
• Input 3 (Mic 3 / Aux 3): Volume
• Bass: ±10dB @ 100Hz
• Treble: ±13dB @ 10kHz
• Power: On/Off Switch
• Power Supply: 240V AC
• Indicators: Power on LED
• Protection: AC Fuse 0.5A, DC Fuse 2 x 3A (internal)

*Specifications are subject to change without notice.