« Prev | Next»

A5350 • 2 Way Stereo / 3 Way Mono Active Crossover


Cat. Page 66


  • $229.00
  • 2+ $209.00
  • 4+ $195.00
  • Price per each
  • Includes GST


    Perth Less than 5pcs
    Balcatta Low stock - Call to confirm
    Cannington Low stock - Call to confirm
    Midland Low stock - Call to confirm
    Myaree Low stock - Call to confirm
    Auburn In Stock
    Springvale Less than 5pcs
    Virginia Low stock - Call to confirm
    Warehouse In Stock

Last updated 8-06-18 10:20:09

This product has been viewed 487 times.

  • Popular
  • Overview
  • Specifications
  • Downloads


A rack mount active crossover may be configured in either stereo 2- way or mono 3-way mode. Designed to be used in a multi-amplifier, multi-speaker PA or front of house system, it accepts a balanced line input via XLR connectors on the rear panel. Output connectors are all balanced XLRs.

The crossover frequencies can be adjusted from 45 to 960Hz, with a x10 scale selector allowing adjustment from 450Hz to 9.6kHz. Gain controls are provided for inputs and for the separate low, mid and high bands. This flexibility allows the system output to be tuned, using the crossover, to suit the speaker system in use and the venue acoustics. Having established as linear a response as is possible by adjusting the crossover filter points and gains, an equaliser such as the A 5330 can be used to fine tune the system.

A separate subwoofer output socket and gain control is provided, with the subwoofer low-pass point adjustable from 20Hz to 200Hz. This output is available in either 2-way or 3-way mode. When using the subwoofer output, a “low cut” switch enables all frequencies below 40Hz to be cut from the other crossover outputs. In a multicabinet system this can be employed to protect the mid/bass drivers from damage caused by powerful sub-bass signals. To provide further signal adjustment, phase invert switches may be used to reverse the polarity of the low, mid or high output signals.


  • 1U 19" rack mount
  • Stereo 2-way or Mono 3-way modes
  • Adjustable input and output gains
  • Balanced XLR inputs and outputs
  • Separate subwoofer output with 20Hz to 200Hz adjustment
  • 45Hz to 960Hz or 450Hz to 9.6kHz filter point adjustment
  • 24db/octave Linkwitz-Riley filter networks
  • Phase invert on low/mid/high outputs
  • Low-cut selector


  • Input: XLR 3 pin balanced 50k˝
  • Max input level: +22dBu typical
  • Output: XLR 3 pin balanced 200k˝
  • Max output level: +21dBu typical
  • Bandwidth: 20Hz to 20kHz
  • Frequency response: 3Hz to 90kHz
  • Dynamic range: >106dB unweighted
  • Distortion: < 0.004% @ 1kHz
  • Interchannel crosstalk: <-80dB
  • S/N ratio:
  • Low: .>94dB
  • Mid: >93dB
  • High: >91dB
  • Stereo crossover range:
  • Low/high: 45-960Hz or 450Hz-9.6kHz
  • Mono crossover range:
  • Low/mid: 45-960Hz or 450Hz-9.6kHz
  • Mid/high: 45-960Hz or 450Hz-9.6kHz
  • Subwoofer (mono or stereo): 20Hz to 200Hz
  • Filter type: Linkwitz-riley, 24dB/octave
  • Controls: Low cut, Phase invert, x10 scale, mono/stereo mode, Stereo/summed selector
  • Power supply: 240V AC
  • Dimensions: 483W x 175D x 44H
  • Weight: 2Kg

*Specifications are subject to change without notice.

Thank you ! We have received your message.
Thank you ! We have received your message.