Programmable Universal Touchscreen Wallplate
A6500
|
DISCONTINUED |
This item is no longer available to purchase. |
|
Software & Icon Library Instructions Programming Guide Brochure Keypad Programmer |
Overview
User generated macros can be created consisting of multiple commands in a single button press. This is ideal for performing multiple tasks at once ie: turn on projector, turn on amplifier, turn off lights, drop down projector screen etc. Wallplate fits into a standard electrical wallbox for ease of installation.
The unit is supplied with a Micro USB to USB ‘A’ female lead for connection of USB keyboards and a 0.5m Cat6 UTP cable for testing purposes.
Features
- User programmable buttons with customisable icons
- Inbuilt icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Dual cover wallplate to suit existing decor
Customer Testimonial:
“I recently installed an A 6500 Programmable Touchscreen Wall Plate Control System for a client, to control a video projector, and motorised projector screen, in a board room. I was very impressed by its functionality and innovation. We have used many different brands of these types of standalone button wall plates in the past, but nothing compares to the A 6500 for both price and flexibility. I will definitely be using these in the future”.
Mark Carton, Techwest Solutions
System Hubs
A 6505 3 Relay, 2 Serial Control Hub
Previously sold as part of the A 6500, this unit is now a stand alone product.
Designed to be used in conjunction with the A 6500 programmable touchscreen wallplate, this control hub enables the control of a variety of devices. Connection to the A 6500 wallplate is via Cat5/6 cable up to 50m away. All commands from the programmed plate are then transported to this hub and the appropriate command signal being either serial (RS232/485 or both), IR or relay is then output to the corresponding pluggable terminals. Combined with the A 6500 this could be used for controlling an AV system in a classroom, lecture theatre, board room etc. The serial outputs could be used to control a projector and amplifier, the IR for controlling a set top box and relays for motorised projector screen, lighting etc. Requires 24V DC power which in turn powers the A 6500 wallplate. Size: 66W x 131W x 29H inc flanges.
A 6510 12 Relay Control Hub
Redback A6510 Front PanelThis relay hub consists of 12 relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways:
1. Direct connection via Cat5/6 UTP cable to the A 6500 wallplate, which is programmed to control relay activation.
2. As an expansion to the A 6505 hub, increasing the total number of relay contacts from 3 to 15. In this configuration, one of the serial outputs of the A 6505 would be used to control the A 6510. These hubs should be located as close together as possible.
3. As a standalone serial controlled relay hub for use with any third party system utilising RS232/485.
Requires 24V DC input. Will provide power to A 6500 wallplate if connected.
Size: 66W x 131W x 29H inc flanges.
A 6515 2 Relay (High Current) Control Hub
This relay hub consists of 2 high current (16A) relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways:
1. Direct connection via Cat5/6 UTP cable to the A 6500 wallplate, which is programmed to control relay activation.
2. As an expansion to the A 6505 hub, increasing the total number of relay contacts from 3 to 5. In this configuration, one of the serial outputs of the A 6505 would be used to control the A 6515. These hubs should be located as close together as possible.
3. As a standalone serial controlled relay hub for use with any third party system utilising RS232/485.
Requires 24V DC input. Will provide power to A 6500 wallplate if connected. Size: 50W x 131W x 46H inc flanges.
System Diagram:
100% developed, designed & assembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
Information & Downloads
- Altronics Code: A6500
- I/N: 14208
- Barcode: 9321758218723
- Shipping Weight: 0.36100Kg
- Packaging Sizes
- EACH: 1
- CARTON: 5
- Large Image 1
- Large Image 2
- Large Image 3
- Software & Icon Library
- Instructions
- Programming Guide
- Brochure
- Keypad Programmer
Warranty & Returns
10 YEARS
We offer 10 years warranty on this product from its date of purchase. This is available from Altronics stores, online purchases or Altronics resellers. In accordance with our full warranty terms we will repair, replace or refund if goods you have purchased from us are defective.
14 DAY MONEY BACK GUARANTEE
Not withstanding our warranty policy, if you are dissatisfied with our goods or service you may return the goods within 14 days of our despatch date. Simply contact us for a return authorisation number and we will refund your purchase in full, less transport costs on receipt of goods. All returned goods must be in as sold condition including all packaging, instructions, invoices etc.
