D8XCel Navigator 8 Sector 3G Alarm Panel

This 8 Zone Alarm Panel features flexible 8 Zone control panel & 3G Cellular communicator. Supplied with 3G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.

You can download this free control app for alarm panel. The Panel can use SMS to receive commands from a Smartphone. The application sends all the intended commands to the Panel by using SMS service. Application can send commands including: arm/disarm, programming, check system status, read alarm memory, receive alarm messages and operate AUX outputs all by SMS.

Features

• Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
• 56 user codes can be programmed to operate by keypad PIN, radio key or access cards
• Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter
• Home mode allows partial arming
• The day mode feature allows daytime monitoring of fire doors, coolrooms etc
• Temporary Day Zone feature allows easy enabling/disabling of Day Mode
• Fire Alarm feature with different siren tones
• Siren chirp and strobe flash on arming with radio key
• All inputs and outputs are heavily protected against lightning and high voltage supply transients
• 8 Programmable auxiliary outputs
• Highly flexible zone to output mapping

• Altronics Code: S5276
• Manufacturer's Code: D8XCEL
• I/N: 15930
• Barcode: 9321758230916
• Shipping Weight: 4.12000Kg
• Packaging Sizes
• EACH: 1
• CARTON: 4
• Large Image 1
• Large Image 2
• Large Image 3
• Large Image 4
• Large Image 5
• Large Image 6
• Large Image 7

• 3G Module: Dual-Band UMTS/HSPA+ 800(850)/2100MHz Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz
• SIM Card type: Standard SIM
• Box Dimensions: 235W x 300H x 90D mm
• Power Supply: 20VDC (Supplied) or 17VAC 1.4 Amp
• Power Supply: 13.8v DC @ 800mA
• Quiescent Current Draw: 80mA with 1 keypad
• Operating Voltage: 17VAC / 15V DC
• Rechargeable Battery: 12 volt 7.0 Amp/hour Sealed lead Acid
• Battery Charging Current: 350mA maximum, current limited
• Dynamic Battery Test: Backup battery is tested under load, hourly and on arming
• Fuses: 2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output
• Zone Outputs: 8 zone inputs. 2 x 24hr tamper inputs
• End of line resistor: Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
• Maximum Keyboards: 3
• Integrated Radio Options: Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
• Serial Header: Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
• Integrated Access Control: Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
• Siren Output: On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
• Strobe Output: 12v DC timed output. Maximum 2 x 1 Watt strobe lights
• Reset Output: 12v DC timed output. Max. 3 x 12v piezo screamers
• Equipment Power Output: 13.8v DC output for powering detectors and other equipment. Maximum 500mA
• AUX Reader: Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC

*Specifications are subject to change without notice.