Description Ordering
A2518 Stereo to Mono RCA Adapter

Stereo to Mono RCA Adapter

A2518 NEW

This unit is designed to convert stereo audio signals into a summed mono line level RCA signal.
A2516 Unbalanced To Balanced Converter XLR-RCA / Screw Term.

Unbalanced To Balanced Converter XLR-RCA /...

A2516 NEW

Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control.
A2515 Balanced To Unbalanced Converter XLR-RCA / Screw Term.

Balanced To Unbalanced Converter XLR-RCA /...

A2515 NEW

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).
A4460 4x8 Stereo Audio Switcher System

4x8 Stereo Audio Switcher System

A4460

Designed to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease.
A4937 3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate

3 Input XLR Mic/Line Pre-Amp Bluetooth Wal...

A4937 NEW

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.
A0642B Telephone Line Isolation Unit

Telephone Line Isolation Unit

A0642B

By law any radio, amplifier etc connected to a telephone system (for background music or paging applications) must be isolated with a line isolation unit (LIU). Adjustable output level suits all telephone systems.
A4954  5 Pin XLR Cat5 Extender (Receiver)

5 Pin XLR Cat5 Extender (Receiver)

A4954

The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection.
A4952  5 Pin XLR Cat5 Extender (Transmitter)

5 Pin XLR Cat5 Extender (Transmitter)

A4952

This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources.
A4953  5 Pin XLR Transmitter Wallplate

5 Pin XLR Transmitter Wallplate

A4953

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4941  3 Pin XLR Transmitter Wallplate

3 Pin XLR Transmitter Wallplate

A4941

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A2080C Selection Panel 10 Zone PA

Selection Panel 10 Zone PA

A2080C

Enables the control of paging and background music over 10 speaker zones. An incoming signal is thus selectable to the zones required.
A4935 3 Input XLR Mic/Line Pre-Amplifier Wallplate

3 Input XLR Mic/Line Pre-Amplifier Wallplate

A4935

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.
A4948  Line Level Compressor/Limiter

Line Level Compressor/Limiter

A4948

This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal.
A4950 Paging Microphone Chime Module

Paging Microphone Chime Module

A4950

By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal.
A3195A 5.1CH Digital Audio Converter

5.1CH Digital Audio Converter

A3195A

This Audio decoder can auto convert optical/coaxial channel (Support LPCM/PCM/RAW) input to 2.0 channel analog audio output, and supports decoding Dolby AC-3/DTS (included 5.1 RAW digital audio streaming).
A4946 RCA to Cat5 Extender (Receiver)

RCA to Cat5 Extender (Receiver)

A4946

The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors.
A4944 RCA to Cat5 Extender (Transmitter)

RCA to Cat5 Extender (Transmitter)

A4944

The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.
A4942 3 Pin XLR Cat5 Extender (Receiver)

3 Pin XLR Cat5 Extender (Receiver)

A4942

The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit.
A4940  3 Pin XLR Cat5 Extender (Transmitter)

3 Pin XLR Cat5 Extender (Transmitter)

A4940

Allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4818 Dante Mic/Line 4 Input, 4 Output Dual Wallplate

Dante Mic/Line 4 Input, 4 Output Dual Wall...

A4818

Dante Interface 4 x Mic/Line Inputs, 4 x Outputs
A3052 Phono Preamp with AUX input

Phono Preamp with AUX input

A3052

This phono preamp can be used to raise your turntable's output to make it compatible with modern amplifiers. At the same time, it adds standardised equalisation. Users may need this phono preamp because their turntable either doesn't have one, in which case they won't be able to play records without one.
A3194 Digital Audio Cat5 Extender Box

Digital Audio Cat5 Extender Box

A3194

Allows digital signals to be transmitted using a single Cat5e or Cat6 cable.
A4816 Dante Mic/Line 4 Input, 2 Output Dual Wallplate

Dante Mic/Line 4 Input, 2 Output Dual Wall...

A4816

Dante Interface 4 x Mic/Line Inputs, 2 x Line Outputs
C9555A Hum and Noise Eliminating Audio Coupler

Hum and Noise Eliminating Audio Coupler

C9555A

A very handy 2 channel inline transformer coupler enabling the interconnection of audio modules without introducing hum and buzz, etc. Typical uses are: * Car sound - Enabling connection from receiver/player to power amplifier * Home theatre / Hi-
A4931V Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931V

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4834 Active Three Pair Audio Signal Distribution Transmitter

Active Three Pair Audio Signal Distributio...

A4834

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4832 Local Input/Output Hub Interface Box

Local Input/Output Hub Interface Box

A4832

A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources.
A4831 Dante 2 Input 4 Output Converter Interface Box

Dante 2 Input 4 Output Converter Interface...

A4831

Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems
A4830 Dante Input/Output Converter Interface Box

Dante Input/Output Converter Interface Box

A4830

Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems.
A4828 Stereo RCA Jack Output UTP Balun Wallplate

Stereo RCA Jack Output UTP Balun Wallplate

A4828

This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4827 3 Pin XLR Line/Balanced Output UTP Balun Wallplate

3 Pin XLR Line/Balanced Output UTP Balun W...

A4827

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4826 3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

3 Pin XLR Balanced & Stereo RCA Output UTP...

A4826

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4825 Dual 3 Pin XLR Input UTP Balun Wallplate

Dual 3 Pin XLR Input UTP Balun Wallplate

A4825

This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4824 3 Pin XLR & Stereo RCA Input UTP Balun Wallplate

3 Pin XLR & Stereo RCA Input UTP Balun Wal...

A4824

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4821 Stereo RCA and 3.5mm Jack Input UTP Balun Wallplate

Stereo RCA and 3.5mm Jack Input UTP Balun ...

A4821

This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4820 3 Pin XLR Line/Balanced Input UTP Balun Wallplate

3 Pin XLR Line/Balanced Input UTP Balun Wa...

A4820

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4928 Single Output Microphone/Line Hub

Single Output Microphone/Line Hub

A4928

A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes.
C9620A 2 Channel Audio Output Converter (High to Low Level)

2 Channel Audio Output Converter (High to ...

C9620A

This unit will convert speaker level output from a head unit to a low level input suitable for feeding directly into an amplifier input.
A4931 Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4930 Four Output Microphone/Line Hub

Four Output Microphone/Line Hub

A4930

This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output.
A3165 Audio Over IP Dante POE Transmitter

Audio Over IP Dante POE Transmitter

A3165

This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.
A3164 Audio Over IP Dante POE Receiver

Audio Over IP Dante POE Receiver

A3164

This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.
A2510A Passive DI Box

Passive DI Box

A2510A

Direct injection (DI) boxes are used to convert high impedance unbalanced signals from guitars or other musical instrument pickups to a low level balanced output signal. This enables the signal to be transported over long distances without picking up noise or hum. Earth and hum loops are isolated from powered equipment such as keyboards.
C9556 Hum and Noise Eliminating Audio Coupler 3.5mm

Hum and Noise Eliminating Audio Coupler 3.5mm

C9556

A very handy 2 channel inline transformer coupler enabling the interconnection of audio modules without introducing hum and buzz, etc. uses stereo 3.5mm connections
A3044 2 Channel Microphone Mixer Pre-Amplifier

2 Channel Microphone Mixer Pre-Amplifier

A3044

Dual microphone preamplifiers that can be mixed in stereo or operated separately. Dual inputs, Dual outputs. Includes 12V power supply.
A3042 Compact Stereo Line Pre-Amplifier

Compact Stereo Line Pre-Amplifier

A3042

This compact stereo pre-amplifier is a great way to boost the output from your mobile devices and anything else with a low output.
A4903A 100V Line to Low Level Adapter

100V Line to Low Level Adapter

A4903A

This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier.

All prices include GST