Raspberry Pi
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
0.2m Raspberry Pi Camera Extension CableZ6474 |
| This cable allows users to extend the length of their camera cable. | ||
 |
0.5m Raspberry Pi Camera Extension CableZ6475 |
| This cable allows users to extend the length of their camera cable. | ||
 |
PiicoDev VEM6030 Ambient Light SensorZ6582 |
|
| The PiicoDev® Ambient Light Sensor is a great solution for sensing ambient light levels. | |
 |
Raspberry Pi Mounting Hardware KitH8945 |
| Includes set of four M2.5 bolts, 12mm brass spacers and nuts for mounting Raspberry Pi boards | ||
 |
MIPI CSI Camera Adapter CableZR6474 NEW |
|
| Connect your ROCK board to a camera module with this MIPI CSI Camera Adapter Cable. | |
 |
MIPI DSI Display Adapter CableZR6479 NEW |
|
| Connect a MIPI display to a ROCK single board computer with this MIPI DSI Display Adapter Cable. | |
 |
Raspberry Pi Zero To Pi Camera CableZ6479 |
| This cable allows standard Pi cameras to be connected to the Pi Zero camera header. | ||
 |
1m Raspberry Pi Camera Extension CableZ6476 |
| This cable allows users to extend the length of their camera cable. | ||
 |
PiicoDev LIS3DH 3-Axis AccelerometerZ6584A NEW |
|
| The on-board LIS3DH can measure 16-bit acceleration data in ranges from 2g to 16g in all 3 axes. | |
 |
2m Raspberry Pi Camera Extension CableZ6477 |
| This cable allows users to extend the length of their camera cable. | ||
 |
PiicoDev Expansion Board for Raspberry Pi ...Z6419 |
|
| The PiicoDev Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering. | |
 |
PiicoDev MS5637 Pressure SensorZ6585 |
|
| Our PiicoDev® Pressure Sensor is perfect for measuring barometric pressure or inferring altitude from air pressure. | |
 |
USB Game Controller (SNES Style) for Raspb...S1146 |
| Bring back the retro! This controller has the same SNES layout although has a USB connector on the end of the cord. This allows it to connect to a PC/Raspberry Pi and be used with any flavour of emulation software. | ||
 |
Raspberry Pi Pico RP2040 Development BoardZ6421 |
|
| Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK. From controlling appliances to operating a light display, Raspberry Pi Pico puts the technology that underpins countless everyday operations into your hands. | |
 |
PiicoDev MPU6050 Motion SensorZ6584 |
|
| Our PiicoDev® Motion Sensor makes it super easy to detect linear or angular motion in your next project. | |
 |
PiicoDev TMP117 Precision Temperature SensorZ6580 |
|
| The PiicoDev Precision Temperature Sensor features a low-power, high precision TMP117 with 16-bit resolution and an accuracy of ±0.1°C (across -20°C to +50°C) with no calibration required. | |
 |
Raspberry Pi Pico RP2040 Development Board...Z6421A |
|
| Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK. From controlling appliances to operating a light display, Raspberry Pi Pico puts the technology that underpins countless everyday operations into your hands. | |
 |
Raspberry Pi CaseHAT SOIC28 Prototyping BoardZ6413 |
| A prototyping HAT that fits inside a Raspberry Pi case! Soldermasked 0.1" holes, plus 28 SMD IC area. Includes 40 pin header (unsoldered). Slots included for display & camera cables. | ||
 |
Raspberry Pi Prototyping HATZ6307 |
| A HAT board with soldermasked 0.1" holes and stackable header so you dont lose access to the GPIO pins. Slots included for display & camera cables. | ||
 |
15cm Micro SD Card Extender CableZ6481 |
| Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. | ||
 |
3W Infra Red LED Module Pair For CamerasZ6471 |
| Ideal for adding nigh vision to a pi camera or other surveillance or monitoring application. Provides 3W of infra red light. Requires 5V DC input. Sold in a pair. | ||
|
46cm Micro SD Card Extender CableZ6483 |
| Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. | ||
|
60cm Micro SD Card Extender CableZ6486 |
| Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. | ||
 |
PiicoDev BME280 Atmospheric SensorZ6581 |
|
| The PiicoDev® Atmospheric Sensor allows you to easily measure barometric pressure, humidity, and temperature. Use it to build your own weather station or perform experiments. | |
 |
5MP Camera to suit Raspberry PiZ6478 NEW |
|
| This camera module has been designed to be used with raspberry pi boards |
