|
Description |
Downloads |
Specs |
Ordering |
|
|
S9269 ROHS
|
|
|
|
These PoE transceiver units allow ethernet
and power to be sent along coaxial cabling.
The 48-56V power supply (M 8976A)
can be added for powering a 802.3at
PoE device (such as an IP camera) at the
receiving end. A master transceiver and
camera transceiver are required to make
a link. Alternatively, a transceiver unit
may be used with the S |
|
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
|
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
|
Z6453 |
|
- Manual Bluetooth control, IR control, line tracking or obstacle avoidance modes
- 2 x 18650 lithium powered
- Easy modular wiring
- Block programming via Scratch software
|
|
The Smart Turtle bot is an easy to program 2 wheel, Arduino based, obstacle avoidance and line tracking robot. It can be custom programmed using standard block based Scratch software. This makes it ideal for classroom coding instruction, students can see the real world effects of their changes in coding. The front of the robot features a 5x5 LED pa |
|
S9446C |
|
- 5MP, 8MP, 12Mp, 16MP and 20MP still shot resolution
- 1920 x 1080 resolution recording
- Time/date stamping
- Photo Stamp: displays temperature, moon phase, date and time on images
- Password protection
- Infrared nightvision
- Time lapse setting
- Code locations in photos
- Ultra low standby power consumption
- Built-in 2.4" TFT colour display
- Performs in most extreme temperatures: -20°C - 60°C
- Compact size
- IP66 rated
- Adjustable triggering interval
|
|
These units are great for monitoring in remote locations, trail scouting etc. Runs off batteries, so its quick &amp easy to set up anywhere you need to keep an eye on things. Weatherproof case with LCD screen. |
|
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
|
M8305 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 5A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
|
S9128B |
|
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor
- AHD/CVI/TVI/CVBS 4 IN 1
- 2.7-13.5mm motorised Lens
- IR Distance max 30m
- IP66 outdoor, OSD & UTC support
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |
|
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
|
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
|
K8672 NEW
|
|
- Build more than 100 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 23 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organise the building blocks based on the colour and size.
|
|
The Robot Master sets supports the building of up to 200 different robotic projects from simple to complex, allowing kids to progress their STEM skills up with staged lessons. |
|
C0946 |
|
- Impedance: 8Ω
- 100V Power taps: 5, 10, 20, 30W
- SPL 1W @ 1m: 88dB @ 1kHz ±2dB
- Freq response: 65Hz - 22kHz
- Weight: 1.8kg ea
- Dimensions (mm): 261H x 160W x 156D (172 including bracket)
|
|
Offers the flexibility for 8 ohm domestic use or 100V line for commercial installations.
These stylish wall speakers deliver high quality sound for music and sound reinforcement in both domestic and commercial installations. Ideal for entertaini |
|
P7427 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
L1045 |
|
- Rugged aluminium diecast shunt casing.
- Easy to connect via screw terminals and heavy duty binding posts.
- Shunt is a universal design which can be used with other types/brands of panel meters.
- Mounting flanges on case allow it to be secured to any surface.
|
|
A 100A shunt box designed for use in high current remote power, off-grid and PV backup systems. Rated up to 100A it provides connections between the batteries and the load using screw terminals and heavy duty binding posts. Maximum voltage 16V (ie: suits 12V battery systems only). Dimensions: 125W x 62H x 82Dmm. |
|
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
5.5W |
-
7W |
-
9W |
-
12W |
-
17W |
-
-
-
Maximum Coax RG6. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
2000m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
-
-
-
Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
16W |
-
18W |
-
19.5W |
-
20W |
-
22W |
-
-
-
Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
600m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
|
P7428 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
T2418A |
|
- Designed for RoHS lead free soldering
- LED display
- Simple key operation
- Burn proof silicone rubber hand piece lead
- Free standing iron holder with tip cleaner
- Temperature adjustable
- Temperature ‘offset’ for fine calibration
- Temperature lockout
- Suitable for ROHS compliant soldering
- ESD safe and spike free circuitry
- Grounding socket
- High insulation ceramic heating element for rapid heat-up and instant recovery slimline & lightweight hand piece.
|
|
An electronic temperature controlled soldering station, designed to meet the needs of production environments. The increased heating power over the Micron 60W station provides increased temperature stability during extended periods of soldering. |
|
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
|
K5530 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(SC Jun-July 2014) Record CD quality sound directly to an SD card with this touchscreen recorder. It offers hours of recording and playback time from an internal rechargeable Li-Ion AA battery and may be recharged via USB. A stereo line input and mono mic input are provided via 3.5mm jacks, plus an internal microphone for instant handheld r |
|
P7429 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
SM9123F |
|
- 1/2.7” CMOS sensor with 1080P video output
- Low light sensitivity of 0.1 Lux / F1.6(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- EZUM series to support focus and camera parameters adjustment remotely from AVTECH HD CCTV DVR
- Manual adjustment of the IR LED brightness
- Day and night 24-hour surveillance with IR effective distance up to 50 meters
- IP66 for weather-proof application
- Camera parameters adjustable when used with AVTECH HD CCTV DVR
|
|
Surface mount dome cameras housed in vandal resistant aluminium housing with infra red illumination for night time viewing. High resolution CMOS sensor produces clear crisp video signal. Motorised zoom |
|
SM9137F |
|
- 1/2.7” CMOS sensor with 1080P video output
- Low light sensitivity of 0.1 Lux / F1.6(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- EZUM series to support focus and camera parameters adjustment remotely from AVTECH HD CCTV DVR
- Manual adjustment of the IR LED brightness
- Day and night 24-hour surveillance with IR effective distance up to 50 meters
- IP66 for weather-proof application
- Camera parameters adjustable when used with AVTECH HD CCTV DVR
|
|
Surface mount bullet camera housed in vandal resistant aluminium housing with infra red illumination for night time viewing. High resolution CMOS sensor produces clear crisp video signal. Motorised zoom |
|
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fusers
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word lables
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
|
X0575 |
|
- 5/1 watt RF power Heavy duty
- Die cast metal chassis
- Fast charger POD supplied with 240v and 12v adaptors
- 3 Programmable instant channel buttons
- 80 Narrowband channels*
- 38 CTCSS & 104 DCS Privacy codes
- Duplex
- Rugged construction
- Channel scan (instant/memory/priority)
- Backlit LCD display
- Rotary volume control
- Signal monitoring
- Keypad lock
- Calling tone
- Power save mode
- Removable flexible antenna
- 2.5mm jack for optional headset or speaker mic
|
|
This quality unit has all the features you would expect to find in a modern UHF transceiver all housed in a rocksolid diecast chassis.
Includes charging pod, mains adaptor and high capacity 1800mAH lithium battery. |
|
C0938 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |