|
Description |
Downloads |
Specs |
Ordering |
|
|
PB7509 ROHS
|
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 30m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
|
PX1227 |
|
|
|
Used in digital Hifi and digital audio applications. See tools section for the T 1562 crimping tool to suit. Cable entry size 5mm to suit RG6 coaxial cable. |
|
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
|
Q0576 ROHS
|
|
- Resolution: 0.1°C
- Range: -30°C to +70°C
- Accuracy: < 40°C ±1.0°C, >40°C ±2.0°C
- Sampling Rate: 10s
- Indicators: Over-range, Low battery
- Battery: Li-Ion Cell CR-2032
- Dimensions: 68.8L x 34.2W x 24H mm
|
|
Measures the ambient temperature of where it is placed. It's also waterproof. |
|
Q0584 |
|
- Current Range: 0-100A dc
- Max Input Current: ±15mA
- Power Supply: 8-24V dc
- Maximum Count: 999 (3 digit)
- Input Impedance: 1kΩ
- Sample Frequency: 400ms
- Dimensions:50W x 26H x 23.5Dmm
- Cutout Size: 48 x 23mm
|
|
For applications requiring a professional finish and digital accuracy. Includes shunt. |
|
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
|
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
|
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
|
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
|
S1160A |
|
- Switch type: SPST
- Switching current: 1A DC
- Contact rating 1.5A @ 200VDC (Max)
- Contact resistance: 90mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -55 to 70 degrees C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
|
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
|
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
|
S1704 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
|
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
|
S1722 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1730 ROHS
|
|
- Colour: Red
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the colour |
|
S1732 ROHS
|
|
- Colour: Green
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1734 ROHS
|
|
- Colour: Orange
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1736 ROHS
|
|
- Colour: White
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. |
|
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|
|
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
|
S2750 |
|
|
|
Features 3 x 20A 12V DC rated switches with red illuminated with individual 15A DC breakers.
114W x 96H x 60Dmm. |
|
S4732
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |