|
Description |
Downloads |
Specs |
Ordering |
|
 |
P9180 ROHS
|
|
|
|
Overall length 57mm. With solder connection for wire termination. 1A @ 250V AC. |
 |
P9181 ROHS
|
|
|
|
Overall length 57mm. With solder connection for wire termination. 1A @ 250V AC. |
 |
P9184 |
|
|
|
This set of crocodile clip test probe adapters comes with both a red and a black test probe. Simply plug in pin probe to turn it into a crocodile clip connection. This test probe pair will work with P 0407 (Multimeter Test Probes 1000V 10A) and P 0404A (Shrouded Professional Grade Multimeter Test Probes Lead Set). |
 |
P9185 |
|
|
|
This Banana Plug Crocodile Clips Pair comes with both a red crocodile clip and a black crocodile clip. Simply plug in banana plug probe to make it a crocodile clip connection. |
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. Fits right in the palm of your hand and is suitable for single handed operation when testing in tricky locations |
 |
Q0107 |
|
|
|
12V car power adaptor. |
 |
Q0174 |
|
- 10 x Position
- Attenuation Ratio: 10:1
- Bandwidth: DC - 60MHz
- Rise Time: 5.8ns
- Input Resistance: 10M Ohm when used with Oscilloscopes with 1M Ohm input
- Input Capacitance: Approx. 15pF
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- 1 x Position
- Attenuation Ratio: 1:1
- Bandwidth: DC - 15MHz
- Rise Time: 23.3ns
- Input Resistance: 1M Ohm (oscilliscope input)
- Input Capacitance: Approx. 46pF plus oscilliscope capacitance
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- Safety: IEC - 1010 CAT II
- Cable Length: 1.2 Metres
|
|
These high quality general purpose oscilloscope probes have x1 and x10 input attenuator and 600V maximum input voltage.
1.5m lead length. |
|
Q0176 |
|
- 10 x Position
- Attenuation Ratio: 10:1
- Bandwidth: DC - 100MHz
- Rise Time: 5.8ns
- Input Resistance: 10M Ohm when used with Oscilloscopes with 1M Ohm input
- Input Capacitance: Approx. 15pF
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- 1 x Position
- Attenuation Ratio: 1:1
- Bandwidth: DC - 15MHz
- Rise Time: 23.3ns
- Input Resistance: 1M Ohm (oscilliscope input)
- Input Capacitance: Approx. 46pF plus oscilliscope capacitance
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- Safety: IEC - 1010 CAT II
- Cable Length: 1.2 Metres
|
|
These high quality general purpose oscilloscope probes have x1 and x10 input attenuator and 600V maximum input voltage. 1.5m lead length. |
 |
Q0203B NEW
|
|
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronising Signal + External Trigger
- Easy to use button layout
- Large and clear 7” true colour 24-bit display
- Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
- Huge selection of auto measurement functions
- Powerful trigger functions: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
- Integrated USB host, support USB disk storage, USB interface system update
|
|
Perfect for those in R&D, product development or service of complex electronic equipment. This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
Q0965A |
|
- 800A AC/DC range
- 10mA resolution
- Backlit LCD
- 28mm clamp opening
- Auto power off
- 6000 count LCD readout
- Data hold and relative functions
- Test leads, temperature probe and carry case included
- 2 x AAA battery included
- Cat II 600V, Cat III 300V
|
|
A clamp meter offering the flexibility of measuring AC
and DC currents up to 800A. Simply clamp the jaws
around the conductor and the display reads the DC or
AC current present. It can test DC Volts, AC Volts, DC
Amps, AC Amps, resistance, capacitance, frequency,
temperature, temperature and continuity. Plus it
features an internal non-contac |
 |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
 |
Q0968 |
|
- Two current ranges 4A, 80A
- 1mA resolution
- Backlit LCD
- One touch zero function
- 23mm jaw opening
- Auto power off
- Data hold function
- Test leads and carry case included
- 2x AAA battery included
- Cat III 600V
|
|
This compact clamp meter provides high resolution current readings up to 80A ac or dc. |
 |
Q1026A |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
|
|
This quality analogue multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q1026B |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Requires 9V battery
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
- CAT II 1000V / CAT III 500V
|
|
This quality analog multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q1053B |
|
- Low battery indicator
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
Q1067 |
|
- On-screen test lead connection prompts
- Capacitance measurement
- Frequency counter
- Temperature measurement
- Continuity checker
- Resistance to 20M ohm
- Diode check
- Continuity buzzer
- Transistor checker
- Auto power off after 30 minutes
- Massive 20A DC current range
- Rubber holster included
- Battery included
|
|
This digital multimeter features an extra large display making it very easy to read. It has a multitude of useful features including transistor tester, capacitor, frequency and temperature ranges. |
 |
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
 |
Q1070A |
|
- True RMS AC measurement
- 6000 count 3.75 digit LCD
- Non contact AC voltage detection
- Temperature measurement.
- Frequency counter to 60MHz
- Capacitance measurement
- Fused 10A input
- Continuity and diode test
- Auto power off
- Low battery indicator
- 2x AAA battery included
- Data hold mode
- Display backlight
- In built torch
- Cat III 600V
|
|
An affordable true RMS digital multimeter, with in built torch for the enthusiast or instrument technician. |
 |
Q1073A |
|
- True RMS AC measurement
- 6000 count reverse backlit LCD
- Autoranging
- Frequency counter to 10MHz
- Capacitance measurement
- Fused 10A input
- Temperature mode (°C/°F)
- Test socket LED lights
- Continuity and diode test
- Internal rechargeable lithium battery
- Range hold & relative mode
- Data hold
- Wireless USB charging adaptor
- Cat III 1000V/Cat IV 600V
|
|
With wireless charging adaptor - no batteries required! Plus, input jack LED indicators to remind users to plug leads into the correct jacks. |
 |
Q1088 |
|
- True RMS AC measurement
- IP67 splash and dust-proof
- 4000 count LCD
- Autoranging
- MAX/MIN display modes
- Frequency counter to 40MHz
- Capacitance measurement
- Fused 10A input
- Temperature mode (°C/°F)
- Continuity and diode test
- Auto power off
- Low battery indicator
- 9V battery included
- Data hold & run mode
- Display backlight
- Class 2 double insulation
- Cat IV 600V, Cat III 1000V
|
|
Designed for marine, mining, industrial and outdoor environments, the unit is splash proof and fully sealed against dust ingress. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q1121B |
|
- Large display with backlight
- Low battery indicator
- Data hold function
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- 1x 9V Battery included
- Cat II
|
|
Amazing multimeter for the price! This 3.5 digit multimeter features 19 ranges, an in-built hFE transistor and diode test function. |
 |
Q1126A |
|
- Display backlighting
- Data hold function
- Continuity buzzer
- Transistor checker
- Diode test
- 10A DC current range
- Rubber holster included
- NCV
- Cat III 600V
- True RMS
- 2x AAA battery included
|
|
With in-built AC mains detection. Featuring true RMS measurement, transistor and diode testing and backlit display. |
 |
Q1127 |
|
- Temperature Range: -20 to 1320°C
- Tolerance: ±3%
- 700mm lead
|
|
Suitable for multimeters with a temperature range. |
