Chemtools

Proudly Australian owned and operated, Chemtools brings over two decades of expertise to the electronics and engineering industries. With 21 years of experience as a trusted supplier of electronic tools, manufacturing and rework equipment—and more than 15 years dedicated to developing specialized engineering products—Chemtools is a leading name in industrial supplies. Our comprehensive range includes chemicals, solvents, adhesives, and equipment, all marketed under the respected Chemtools brand.

View as Grid List

Sort by

Display per page

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 0.635mm White

T1210A

0.635mm White 1.5m Solder Wick Desoldering Braid

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 0.635mm White

i h

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long.

T1211

0.635mm White 7.6m Solder Wick Desoldering Braid

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long.

i h

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.27mm Yellow

T1212A

1.27mm Yellow 1.5m Solder Wick Desoldering Braid

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.27mm Yellow

i h

T1213

1.27mm Yellow 7.6m Solder Wick Desoldering Braid

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long.

i h

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.

10g Tube

H1600A

10g Tube Silicone Heatsink Thermal Paste Compound

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 10g Tube

i h

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.

150g Tube

H1610A

150g Tube Silicone Heatsink Thermal Paste Compound

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 150g Tube

i h

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 2.54mm Blue

T1216A

2.54mm Blue 1.5m Solder Wick Desoldering Braid

Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 2.54mm Blue

i h

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.

2g Syringe

H1616

2g Heatsink Thermal Paste Compound Syringe

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 2g Syringe

NEW

i h

This carbon conductive grease can tolerate high temperatures (200&degc) and keep electrically conductive metal free from rust &amp corrosion.

H1630

50g Carbon Conductive Grease

This carbon conductive grease can tolerate high temperatures (200°C) and keep electrically conductive metal free from rust & corrosion.

i h

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.

50g Syringe

H1615A

50g Heatsink Thermal Paste Compound Syringe

High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 50g Syringe

i h

An electrically insulating grease which does not breakdown when high voltages are applied. Often applied to connectors and rubber gaskets for lubricating and sealing parts of the connector without arcing. 50g

T3127

50g Silicone Dielectric Grease

An electrically insulating grease which does not breakdown when high voltages are applied. Often applied to connectors and rubber gaskets for lubricating and sealing parts of the connector without arcing. 50g

i h

Chemtools 8406 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength.

T3018

Adhesive Glue 8406 20gm

Chemtools 8406 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA) like superglue. It is specifically formulated to bond difficult surfaces with high industrial strength.

i h

A clean, safe to use etchant, white powder, mix with water 1:5 ratio.

H0802A

Ammonium Persulphate 500gm

A clean, safe to use PCB etchant, white powder, mix with water 1:5 ratio.

Road only

i h

Chemtools high quality two component Silicone Potting Compound is specially formulated for potting applications in the Electrical and Electronics industry.

Chemtools PCT-7000 potting compounds offer good protection against impact damage and because of

H1620

Chemtools Potting Compound Silicone 200gm (PCT-7000)

Chemtools high quality two component Silicone Potting Compound is specially formulated for potting applications in the Electrical and Electronics industry.

i h

This circuit board lacquer is a general purpose resin coating for printed circuit boards.

T3176

Clearcote Circuit Board Lacquer

This printed circuit board (PCB) lacquer is a general purpose resin coating for printed circuit boards.

Road only

i h

Provides a clear tough high gloss finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion.

T3175

Conformal Coating Aerosol 400g

Provides a clear tough high gloss acrylic finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion.

Road only

i h

Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g

- Non Ozone depleting
- Safe on most plastics
- Stops corrosion
- Ideal for PCBs, tape heads, bu

T3160

Contact Cleaning Aerosol 350g

Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g

Road only

i h

Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment.

T3061A

Contact Cleaning Lube Aerosol 175g

Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment.

Road only

i h

Chemtools DEOX R30 non-stick dry PTFE lubricant is a Teflon® based spray that acts as a powerful dry lubricant.

T3164

DEOX R30 Non-Stick Dry PTFE Lubricant 300g

Chemtools DEOX R30 non-stick dry PTFE lubricant is a Teflon® based spray that acts as a powerful dry lubricant.

Road only

i h

DEOX R60 Heavy Duty Silicone Spray is a high-performance, water-displacing light lubricant designed to offer superior corrosion resistance against extreme weather, temperature conditions, salt spray, and some chemical exposures. 300g.

T3120A

DEOX R60 Heavy Duty Silicone Spray 300g

DEOX R60 Heavy Duty Silicone Spray is a high-performance, water-displacing light lubricant designed to offer superior corrosion resistance against extreme weather, temperature conditions, salt spray, and some chemical exposures. 300g.

Road only

NEW

i h

Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings.

T3066A

Electronic Cleaning Solvent Aerosol 175g

Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings.

Road only

i h

T3150

Electronic Cleaning Solvent Aerosol 230g

Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings.

Road only

i h

Copper etchant. Supplied in 500mL bottle, premixed for easy of use.

H0800

Ferric Chloride Copper Etchant 500mL

Copper PCB etchant for making prototype PCBs. Supplied in 500mL bottle, premixed for easy of use.

Road only

i h

Ideal for cleaning flux residue from recently soldered PCB's and electronic components. Suitable for use with leaded and lead-free soldering processes. Formulated to clean rosin, non-rosin, no clean fluxes and ionic contamination. Evaporates quickly leavi

T3140

General Purpose Flux Remover Aerosol 300g

Ideal for cleaning flux residue from recently soldered PCB's and electronic components. Suitable for use with leaded and lead-free soldering processes. Formulated to clean rosin, non-rosin, no clean fluxes and ionic contamination.

Road only

i h

Specially formulated water-based, non-abrasive multi-application cleaner which sanitises and removes tough dirt, dust, grease, lint, oil, toner, carbon, fingerprints, and smudges from multiple surfaces.

T3056A

Ground Zero Anti-Static Glass & Surface Cleaner Aerosol 400g

Specially formulated water-based, non-abrasive multi-application cleaner which sanitises and removes tough dirt, dust, grease, lint, oil, toner, carbon, fingerprints, and smudges from multiple surfaces.

Road only

NEW

i h

Shop Products

Chemtools

Follow us