Signal Processors

A wide selection audio public address signal processing equipment. Ideal for use in commercial audio systems. Parametric equalisers, DI boxes, compressors, pre-amplifiers, limiters, hum eliminators and level converters available. Locally developed audio products for professional PA use.

Dante Audio Interfaces

Level Converters

Pre-Amplifiers

View as Grid List

Sort by

Display per page

This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity.

A4904

1 In to 2 Out Audio Splitter

This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity.

Australian Made

i h

This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier.

A4903A

100V Line to Low Level Adapter

This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier.

Australian Made

i h

This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable
for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers
with high quality components for outstanding sou

A5332

2 Channel 31 Band EQ With Feedback Detection

This professional unit delivers outstanding equalisation in live and studio applications.

i h

This unit will convert speaker level output from a head unit to a low level input suitable for feeding directly into an amplifier input.

C9620A

2 Channel Audio Output Converter (High to Low Level)

This unit will convert speaker level output from a head unit to a low level input suitable for feeding directly into an amplifier input.

i h

Dual microphone preamplifiers that can be mixed in stereo or operated separately. Dual inputs, Dual outputs. Includes 12V power supply.

A3044

2 Channel Microphone Mixer Pre-Amplifier

Dual microphone preamplifiers that can be mixed in stereo or operated separately. Dual inputs, Dual outputs.

i h

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.

A4937

3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.

Australian Made

i h

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.

A4935

3 Input XLR Mic/Line Pre-Amplifier Wallplate

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.

Australian Made

i h

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

A4824

3 Pin XLR & Stereo RCA Input UTP Balun Wallplate

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

i h

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

A4826

3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

i h

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

A4820

3 Pin XLR Line/Balanced Input UTP Balun Wallplate

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

i h

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

A4827

3 Pin XLR Line/Balanced Output UTP Balun Wallplate

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).

i h

A compact headphone amplifier featuring four individual channels with volume controls. Ideally suited to monitoring in band and stage environments, it can also be used in educational situations such as language labs. Amplification and individual volume c

A2630

4 Channel Headphone Distribution Amplifier

A compact headphone amplifier featuring four individual channels with volume controls. Ideally suited to monitoring in band and stage environments, it can also be used in educational situations such as language labs.

i h

This Audio decoder can auto convert optical/coaxial channel (Support LPCM/PCM/RAW) input to 2.0 channel analog audio output, and supports decoding Dolby AC-3/DTS (included 5.1 RAW digital audio streaming).

A3195A

5.1CH Digital Audio Converter

This audio decoder/extractor can convert optical/coaxial channel (Support LPCM/PCM/RAW) input to 2.0 channel analog audio output, and supports decoding Dolby AC-3/DTS (included 5.1 RAW digital audio streaming).

i h

This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.

A3164

Audio Over IP Dante POE Receiver

This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 UTP cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.

i h

This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.

A3165

Audio Over IP Dante POE Transmitter

This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 UTP cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.

i h

Features two line inputs and one mic input, each with its own level control. The mic input can be configured for either balanced or unbalanced operation. All inputs are mixed to a single line level output. It can be powered from either a single rail po

A2055A

Balanced Mic / Line Input Pre-Amp & Mixer

Features two line inputs and one mic input, each with its own level control. The mic input can be configured for either balanced or unbalanced operation.

i h

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.

A4932

Balanced Microphone/Line Pre Amplifier

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.

Australian Made

i h

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.

A2513

Balanced To Unbalanced Converter XLR-RCA

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.

i h

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).

A2515

Balanced To Unbalanced Converter XLR-RCA / Screw Term.

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).

i h

A4958

Compact Balanced Microphone/Line Pre Amplifier

The Redback® A 4958 is a compact, professional-grade pre-amplifier designed for versatility and reliability. It accepts both XLR and RCA inputs and provides a volume-adjustable XLR or RCA output, with RCA signals internally mixed to mono.

Australian Made

NEW

i h