Arduino

The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM(ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with USB. Compatible with most Arduino shields.

A microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with USB.

Introducing the Funduino UNO R4 Minima compatible Arduino board. Equipped with the RA4M1 microprocessor, this board offers enhanced processing power, expanded memory, and more, all while maintaining the reliable UNO form factor and practical 5V operating voltage. Get ready for a remarkable upgrade!

The Funduino UNO R4 with WiFi is an Arduino compatible board integrating the powerful RA4M1 microcontroller with the robust wireless capabilities of the ESP32-S3 from Espressif. Additionally, it features an on-board 12x8 LED matrix, a Qwiic connector, a VRTC, and an OFF pin, making it an ideal choice for all your maker projects.

An Arduino compatible development board featuring WiFi making it ideal for plug-and-play projects.The board also features its GPIO broken out, a full USB-serial interface, NodeMCU pre-flashed and a power supply all on the one breadboard-friendly package.

An Arduino compatible development board featuring WiFi making it ideal for plug-and-play projects.The board also features its GPIO broken out, a full USB-serial interface, NodeMCU pre-flashed and a power supply all on the one breadboard-friendly package.

Developed in house by Altronics, the Inventa Maker Plate was developed to bring Arduino into the home automation sector by incorporating it with standard Australian electrical wallplates. 12 Button Shield.

This Color TFT LCD display has 128 x 128 resolution and 262 color. It uses SPI interface to communicate with controller such Arduino, it is the best upgrading of the Nokia5110.

A compact monochrome 128x64 OLED SPI display module with I2C/SPI communication. 3-5V input. 22x22x12mm.

A handy parts kit containing everything you need to start learning Arduino and building projects. Includes a huge selection of sensor boards, LEDs, pots, jumper wires, a breadboard, LCD screen and much more!

Developed in house by Altronics, the Inventa Maker Plate was developed to bring Arduino into the home automation sector by incorporating it with standard Australian electrical wallplates. 16x2 LCD Shield.

A compact 2.2 inch serial controlled TFT LCD screen for Arduino and related open source projects. Provides a crisp clear 240 x 320 resolution display with 262K colour depth. Great for electronic projects requiring a small, easy to read graphical SPI display screen.

This SPI 2.8" TFT Touchscreen is designed to suitable for Arduino UNO/Mega2560. It can directly plug into the UNO/Mega2560 board without any wiring and soldering.

Developed in house by Altronics, the Inventa Maker Plate was developed to bring Arduino into the home automation sector by incorporating it with standard Australian electrical wallplates. 2.8" TFT Touchscreen With SAM3X8E ARM CPU.

A 480 x 320 SPI display shield for the Arduino Mega utilising the ILI9481 chipset. Ideal for projects requiring sensor monitoring. 5V/3.3V input.

A 480 x 320 SPI display shield for the Arduino Mega utilising the ILI9486 chipset. Ideal for projects requiring sensor monitoring.

This 5V relay module is suitable for integration with many types of micro control systems, including Arduino. Ideal for home appliance control. 5V-12V TIL control signal suitable for controlling DC / AC signal. The module is perfect for common Arduino applications.

A cut down MegaBox which provides a backlit 16x2 LCD for simple readouts, plus room to customise the front panel with buttons or IR sensor. UNO (sold separately) fits neatly behind the screen and provides room for add-on shields as required.

The Touch Board is a microcontroller board with dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as having 12 capacitive touch electrodes. It is based around the ATmega32U4 and runs at 16MHz from 5V.

This W5500 ethernet development board is based on the microcontroller of Arduino Ethernet. The board features integrated USB download, TF card slot and more functions on it. Its also fully compatible with UNO pins.

Handy stickers for your Atmega328p chips. Great for reminding you of the appropriate pinouts for your DIY Arduino prototype. Printed on quality Arlon UV vinyl.

The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices.

A control shield suitable for use with the Arduino UNO to power and control the Z 0977 8x8 RGB LED module. Create colourful effects, display symbols and text using this creative shield. 5V DC input. DM163 & M54564FP controller on board.

An SD card module fitted with a DS1307 real time clock for recording data to mass storage.