This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. Used to connect a video source to a display device such as a computer monitor, and it can also carry audio, USB, and other forms of data. DisplayPort was designed to replace VGA, FPD-Link, and Digital Visual Interface (DVI). This range supports 8K resolution at 60Hz and due to its slimline plug it will suit a 25mm conduit.
Built with a premium Silicon Line GmbH chipset, manufactured in Germany, this cable guarantees long-term stability and outstanding connectivity you can trust.
Specifications:
Performance:
Standards Compliance: DisplayPort 1.4/HBR3, HDCP 1.4/2.2
Maximum Pixel Clock Frequency: 810MHz
Maximum Video Bit Rate: Supports up to 8.1Gbps per lane, 32.4Gbps total
Maximum Colour Depth: 48bits
Maximum Supported Resolutions: 8K @ 60Hz
Connections:
DisplayPort Input/Output: 20 Pin DisplayPort Male
Power: No external power supply is required
AUX Channel Support:
AUX Channel Communications: Supports bi-directional communications for EDID, HDCP, Link Training etc
HDCP Support: HDCP 1.4 and HDCP 2.2
Optical:
Optical Technology: 4 x discreet optical channels, 10GHz, 850nm
Optical Transmitter: 4 x 850nm multi-mode VCSELs
Optical Receiver: 4 x GaAs PIN photo diodes
Cable:
Fiber Cable Jacket: Hybrid cable 4 x fiber and 8 x copper wire
Cable Jacket: PVC, Black
Cable Length: 10m
Mechanical - Cable:
Maximum Tensile Load: 300N
Minimum Bend Radius: 48mm
Cable Diameter: 4.8mm (outside)
Environmental:
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to +85°C
Operating/Storage Humidity: 5% to 80% (non condensing)
Power Requirements:
Power Source: Powered from DisplayPort source device
Power Consumption: <0.5W each end