Tools

The Altronics tools range includes a wide array of hand tools, soldering equipment and accessories to make working with electronics or installations easier. We also stock a complete range of solvents and aerosols for the work bench.

Soldering Irons

Iron Tips & Accessories

Solder & Desoldering Braid

Gas Powered Tools

Electronics Workbench

Magnifying Lamps

Screwdrivers

Wire Strippers

Crimping Tools

Pliers & Side Cutters

Cutting & Drilling

Cases & Storage

Tape & Adhesives

Ultrasonic Cleaners

Cable Snakes

Static Protection

Aerosols & Solvents

Other Tools

View as Grid List

Sort by

Display per page

This circuit board lacquer is a general purpose resin coating for printed circuit boards.

T3176

Clearcote Circuit Board Lacquer

This printed circuit board (PCB) lacquer is a general purpose resin coating for printed circuit boards.

Road only

i h

Tough injection moulded thermoplastic. Features a built-in tension spring, centre conductor cutter, and a slide adjustment to change from RG-58, RG-59, or RG-6.

T1516

Coaxial Wire Stripper

Tough injection moulded thermoplastic. Features a built-in tension spring, centre conductor cutter, and a slide adjustment to change from RG-58, RG-59, or RG-6.

i h

This combination 60W soldering iron and 90W vacuum desoldering station provides hobby enthusiasts and technicians with everything they need for soldering on the workbench in one compact unit.

T2052

Combination 60W Soldering & 90W Vacuum Desoldering Station

This combination 60W soldering iron and 90W vacuum desoldering station provides hobby enthusiasts and technicians with everything they need for soldering on the workbench in one compact unit.

i h

Enables accurate bending of axial leaded components in preparation for PCB loading. Five bending widths: 7.5, 10, 12.5, 15 and 17.5mm. Suitable for use with resistors, diodes etc. A real timesaver when building kits or prototypes.

T1495

Component Leg Bending Tool

Enables accurate bending of axial leaded components in preparation for PCB loading. Five bending widths: 7.5, 10, 12.5, 15 and 17.5mm. Suitable for use with resistors, diodes etc. A real timesaver when building kits or prototypes.

i h

Provides a clear tough high gloss finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion.

T3175

Conformal Coating Aerosol 400g

Provides a clear tough high gloss acrylic finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion.

Road only

i h

T2406

Conical Tip To Suit T2405

Conical tip to suit T 2405 Soldering Iron.

i h

T2410

Conical tip to suit T2409

Conical tip to suit T 2409 Soldering Iron.

i h

Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g

- Non Ozone depleting
- Safe on most plastics
- Stops corrosion
- Ideal for PCBs, tape heads, bu

T3160

Contact Cleaning Aerosol 350g

Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g

Road only

i h

Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment.

T3061A

Contact Cleaning Lube Aerosol 175g

Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment.

Road only

i h

Suitable for light to medium duty drilling and driving tasks on your electronics workbench.

T2126

Cordless USB Rechargeable Driver Drill

This USB rechargeable power drill / driver is suitable for light to medium duty drilling and driving tasks on your electronics workbench.

NEW

i h

Adjustable crimp tension with ratchet action handles. Heavy duty all metal construction.Suits RG58, Fibre Optic, SMA, SMB and RG174 connectors. Suitable for use with connectors fitted to multi-core RGB coaxial cable ie Altronics BNC P 0525.

T1555

Crimp Tool Hexagonal Coaxial RG58/174 with Ratchet

Adjustable crimp tension with ratchet action handles. Heavy duty all metal construction.Suits RG58, Fibre Optic, SMA, SMB and RG174 connectors. Suitable for use with connectors fitted to multi-core RGB coaxial cable ie Altronics BNC P 0525.

i h

Suitable for crimping RG6 (see P 0481A F-type Coaxial) / RG11 / RG59 / RG214 size connectors. Adjustable crimp tension. Heavy duty all metal construction.

T1556

Crimp Tool Hexagonal Coaxial RG6/11/59/214

Suitable for crimping RG6 (see P 0481A F-type Coaxial) / RG11 / RG59 / RG214 size connectors. Adjustable crimp tension. Heavy duty all metal construction.

i h

Designed to crimp solid pins used in Deutsch DT multi-pole connectors. Suits size 12, 16 and 20 DT series pins. Included in the kit are a terminal housing release tool, pin removal tool and screwdriver.

T2196

Crimping Kit For Deutsch Connectors

Designed to crimp solid pins used in Deutsch DT multi-pole connectors. Suits size 12, 16 and 20 DT series pins. Included in the kit are a terminal housing release tool, pin removal tool and screwdriver.

i h

Steel crimp tool suitable for uninsulated lugs and Anderson plugs. Ideal for heavy duty wiring in automotive and solar power systems. Suits uninsulated lugs up to 35mm2 conductor area

T1531A

Crimping Tool Heavy Duty Anderson / Uninsulated Lugs

Steel crimp tool suitable for uninsulated lugs and Anderson plugs. Ideal for heavy duty wiring in automotive and solar power systems. Suits uninsulated lugs up to 35mm2 conductor area

i h

Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. 6mm2 to 50mm2. Commonly used for making high current battery leads in solar installations. 387mm length.

T1534B

Crimping Tool Heavy Duty Anderson / Uninsulated Lugs

Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. Revolving dies allow for 6mm2 to 50mm2 connections. Commonly used for making high current battery leads in solar installations. 387mm length.

i h

Suits red, blue and yellow connectors. Incorporates cutters and stripper.

T1550

Crimptool Automotive

Suits red, blue and yellow connectors. Incorporates cutters and stripper.

i h

This hexagonal coaxial crimper. Suitable for crimping RG6 P 0486 F-type as well as RG213 P 0451 N-type and other RF coaxial connectors. Adjustable crimp tension. Heavy duty all metal construction.

T1553

Crimptool Coaxial RG6 / RG213

This hexagonal coaxial crimper. Suitable for crimping RG6 P 0486 F-type as well as RG213 P 0451 N-type and other RF coaxial connectors. Adjustable crimp tension. Heavy duty all metal construction.

i h

This hexagonal coaxial crimper. Suitable for crimping RG6 P 0486 F-type as well as RG213 P 0451 N-type and other RF coaxial connectors. Ratchet Action.

T1553A

Crimptool Coaxial RG6 / RG213

This hexagonal coaxial crimper. Suitable for crimping RG6 P 0486 F-type as well as RG213 P 0451 N-type and other RF coaxial connectors. Ratchet Action.

i h

Compression crimps are now becoming popular within the AV industry. This heavy duty die cast tool can be adjusted to suit compression F, BNC & RCA connectors. Built for the rigours of veryday use. Suitable for RG59, RG6 and RG11.
Perfect for use with ou

T1562

Crimptool Compression Crimp

Compression crimps are now becoming popular within the AV industry. This heavy duty die cast tool can be adjusted to suit compression F, BNC & RCA connectors. Built for the rigours of veryday use. Suitable for RG59, RG6 and RG11. Perfect for use with our P1227 PAL connector.

i h

Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs.

T1533B

Crimptool Heavy Duty Lugs 6mm2 to 120mm2

Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. Revolving dies allow for 6mm to 120mm connections.

i h

Suits all IDC cable connectors. Commonly used for connecting items such as SCSI and IDE computer plugs. Don't destroy connectors with a vice or a hammer, crimp them the easy way. Crimping distance from 27.5mm to 6mm (with attachment).

T1540

Crimptool IDC Plug

This handy crimp tool suits all IDC connectors and is commonly used for data connections. It is primarily used for non-removable connections with flat/ribbon or rainbow cable.

i h

Suits IDC transition connectors. Commonly used for data connections. Used for non removable connections in flat/ribbon cable.

T1542

Crimptool IDC Transition

Suits IDC transition connectors. Commonly used for data connections. Used for non removable connections in flat/ribbon cable.

i h

This heavy duty ratchet all metal deluxe tool will crimp all size modular plugs from 4 to 8 way. Also has inbuilt cutters and wire stripper with stops for correct stripping length.

T1571B

Crimptool Modular RJ Ratchet

This heavy duty ratchet all metal deluxe tool will crimp all size modular RJ plugs from 4 to 8 way, including Cat5e, Cat6, Cat6a, Cat7 types. It also has inbuilt cutters and wire stripper with stops for correct stripping length.

i h

This open barrel terminal crimper is designed for use with 0.08mm² open barrel terminals and connectors. It features multiple jaw crimp sizes including 0.7, 1.0, 1.3, 1.6, 1.9 and 2.2mm.

T1578

Crimptool Open Barrel Terminal 28-20 AWG

This open barrel terminal crimper is designed for use with 0.08mm² open barrel terminals. It features multiple jaw crimp sizes including 0.7, 1.0, 1.3, 1.6, 1.9 and 2.2mm. Suitable for JAM, Molex, JST and Tyco terminals and other U-barrel terminals and connectors.

NEW

i h

Professional grade crimper ideal for automotive terminals and connectors. Crimping range 0.25mm - 6.0mm (suits red, blue and yellow size connectors). Ratchet action handles. Heavy duty all metal construction.

T1552A

Crimptool Ratchet Automotive

Professional grade crimper ideal for automotive terminals and connectors. Crimping range 0.25mm - 6.0mm (suits red, blue and yellow size connectors). Ratchet action handles. Heavy duty all metal construction.

i h

Shop Products

Tools

Follow us