Dynalink

USB type A Fem. To USB type A Female coupler.

USB type A Fem. To USB type B Male Gender Changer.

We use a lot of Raspberry Pi around the office, but we were surprised there were no decent VESA mount options available for it. So we made one!

Blank mechanism plate to suit Altronics Dual Cover plates.

Apple lightning to usb 1.5m charging cable

This cable allows you to connect Lightning equipped devices to USB C ports for charging, data transfer etc. Length: 2m

A compact articulated wall bracket for television screens up to 42” in size and 25kg in weight. Max distance from wall 342mm, folds flat to 52mm from wall surface. Provides 180° of adjustment and 15° of tilt. Mounting hole centres at 50mm, 75mm and 200mm square.

This articulated bracket is designed for caravan and vehicle use with a retaining locking pin for keeping your monitor secure when travelling. Offers tilt adjustment and secure positioning up to 366mm from the mounting surface. Suits VESA 75/100 and 200 using the included extension plates.

This volume control is rated at 100 watts (50W per channel). It features selectable impedance matching, allowing up to 8 pairs of speakers to be controlled. Includes 11 settings plus Off. Connections are made via a pluggable terminal block.

Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.

Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.

Allows the transmission of a signal from a camera for up to 600m (B+W) or 300m (colour) over standard cat 5 UTP cable. Two units are required to form a link. No power required. Supplied with a single BNC connector for video (RCA - BNC adaptor included) and RCAs for audio. Sold individually.

Fitted with a combination of "back to back" connectors and screw terminals. VGA connector & 3.5mm audio are via screw terminals. All other connections (RCA, S-Video & USB Type A) are "back to back".

Ultra thin cables, ideal for high density patch use. Cuts down on the bulk whilst maintaining Category 6 gigabit performance. Backwards compatible with Cat5/Cat5e. 8 Pin RJ45 Male To 8 Pin RJ45 Male Black 0.25m - Category 6.

This 30cm black Cat6 patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures.

This 30cm black Cat6a S/FTP patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 0.3m

This 0.5m black Cat6 patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures.8 Pin RJ45 Male to 8 Pin RJ45 Male Black 0.5m - Category 6

Ultra thin cables ideal for high density patch panel use. Cuts down on the bulk whilst maintaining Category 6 gigabit performance. Backwards compatible with Cat5/Cat5e. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 0.5m - Category 6

This 0.5m black Cat6a S/FTP patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 0.5m

This 10m black Cat6 patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 10m - Category 6.

Ultra thin cables ideal for high density patch panel use. Cuts down on the bulk whilst maintaining Category 6 gigabit performance. Backwards compatible with Cat5/Cat5e. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 10m - Category 6

This 10m black Cat6a S/FTP patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 10m

This 15m black Cat6 patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 15m - Category 6

This 15m black Cat6a S/FTP patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 15m

This 1m black Cat6 patch cable is part of the Dynalink patch cable range and offers better signal to noise ratio with minimal loss in modern networks requiring speeds up to 10GBASE-T (10 Gigabit) ethernet speeds. The range has been designed to be compliant to the latest standards and are manufactured to a very high standard, passing rigorous testing procedures. 8 Pin RJ45 Male to 8 Pin RJ45 Male Black 1m - Category 6.