Professional Audio

Altronics has been involved in the professional audio industry since 1976. We import quality public address equipment from leading manufacturers in South East Asia in addition to manufacturing our own locally made mixers, amplifiers and paging systems at our Perth production facility.

View as Grid List
Sort by
Display per page
Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.
A2304

Attenuator Volume Control Stereo 60W

Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.
Australian Made
$36.32
i h
Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.
A2305A

Attenuator Volume Control Stereo 60W

Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB.
Australian Made
$62.73
i h
This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.
A3164

Audio Over IP Dante POE Receiver

This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 UTP cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.
$453.64
i h
This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.
A3165

Audio Over IP Dante POE Transmitter

This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 UTP cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.
$453.64
i h
Featuring Auto-Scan system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby. Incorporates diversity reception ensuring a consistent and clear micr
C8860B

Auto-Scan UHF Wireless Mic Receiver 16 Ch 520-550MHz

Featuring Auto-Scan system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby.
$271.82 $308.18
i h
Features two line inputs and one mic input, each with its own level control.  The mic input can be configured for either balanced or unbalanced operation.  All inputs are mixed to a single line level output.  It can be powered from either a single rail po
A2055A

Balanced Mic / Line Input Pre-Amp & Mixer

Features two line inputs and one mic input, each with its own level control. The mic input can be configured for either balanced or unbalanced operation.
$100.00
i h
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4932

Balanced Microphone/Line Pre Amplifier

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
Australian Made
$195.45
i h
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.
A2513

Balanced To Unbalanced Converter XLR-RCA

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.
$39.55
i h
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).
A2515

Balanced To Unbalanced Converter XLR-RCA / Screw Term.

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).
$50.86
i h
Beltpack charging pod to suit C7195A or C7195B.
C7196A

Beltpack Charging Pod To Suit C7195A/B

Beltpack charging pod to suit C7195A or C7195B.
$90.00
i h
Incorporates a 3 pin XLR socket for mounting  gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black.
C0431

Black desk Mount XLR Microphone Socket

Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black.
$12.68
i h
Has a 5/8&quot male thread one end and 5/8&quot female thread other end. Screws included. Black base
C0421

Black Gooseneck Microphone Base

Has a 5/8" male thread. Screws included. Black base
$6.32
i h
Nylon washer black suit M6
Pack Qty: 100
H5401

Black Nylon Washer Pk 100

Nylon washer black suit M6 Pack Qty: 100
$11.14
i h
Nylon washer black suit M6
Pack Qty: 1000
H5402

Black Nylon Washer Pk 1000

Nylon washer black suit M6 Pack Qty: 1000
$87.23
i h
Nylon washer black suit M6
Pack Qty: 12
H5400

Black Nylon Washer Pk 12

Nylon washer black suit M6 Pack Qty: 12
$2.82
i h
Blanking panel for H 5170 and H5172
Pk. 6
H5174

Blanking Plate to Suit H 5170 / H 5172 Pk6

Blanking panel for H 5170 and H5172 Pk. 6
$19.95
i h
Blanking panel for H 5171 and H5173
Pk. 6
H5175

Blanking Plate to Suit H 5171 / H 5173 Pk6

Blanking panel for H 5171 and H5173 Pk. 6
$19.86
i h
This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o
C0351A

Boundary Mic Pro Electret

This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert.
$177.27
i h
Durable zip up carry bag to protect your portable PA system from the elements.
C7320

Carry Bag to suit C7310-C7314

Durable zip up carry bag to protect your portable PA system from the elements.
$31.82
i h
Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap.
C0513

Carry Bag To Suit Microphone Floor Stands

Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap.
$15.68
i h
Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair).  Suitable for CB''''s, radio transceivers etc.  Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz
C0335

CB Type Balanced Microphone With Bare Ends

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip. Tailored frequency response 300Hz- 8KHz
$35.91
i h
0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice.
C0330B

CB Type Curly 0.75m Microphone Lead With Bare Ends

0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice.
$31.77
i h
Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones.
C0336

CB Type Microphone Mounting Clip

Microphone clip to suit the C 0333/C 0334/C 0335 range of CB microphones.
$2.73
i h
Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair).  Suitable for CB's, radio transceivers etc.  Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335)
C0333

CB Type Microphone With Bare Ends

Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.
$27.23
i h
Suitable for Redback radio microphone installations requiring extended operating range ie: supermarkets, shopping malls, function centres etc. Provides 9dB of gain at 800MHz enabling installation up to 50m from the receiver when using
C8841A

Ceiling Mount High Gain UHF Mic System Antenna

Suitable for Redback radio microphone installations requiring extended operating range ie: supermarkets, shopping malls, function centres etc.
$159.09
i h
Filters Close