Chemtools
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
0.635mm White 1.5m Solder Wick Desoldering...T1210A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 0.635mm White | ||
 |
0.635mm White 7.6m Solder Wick Desoldering...T1211 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. | ||
 |
1.27mm Yellow 1.5m Solder Wick Desoldering...T1212A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.27mm Yellow | ||
 |
1.27mm Yellow 7.6m Solder Wick Desoldering...T1213 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. | ||
 |
1.91mm Green 1.5m Solder Wick Desoldering ...T1214A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.91mm Green | ||
 |
1.91mm Green 7.6m Solder Wick Desoldering ...T1215 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 1.91mm Green | ||
 |
10g Tube Silicone Heatsink Thermal Paste C...H1600A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 10g Tube | |
 |
150g Tube Silicone Heatsink Thermal Paste ...H1610A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 150g Tube | |
 |
1L Cable Pulling LubricantT3190 |
| Cable Lubricant is used to assist in the laying and pulling of cable into conduits under floors, under ground and more. | ||
 |
2.54mm Blue 1.5m Solder Wick Desoldering B...T1216A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 2.54mm Blue | ||
 |
2.54mm Blue 7.6m Solder Wick Desoldering B...T1217 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 2.54mm Blue | ||
 |
3.2mm Brown 1.5m Solder Wick Desoldering B...T1218A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 3.20mm Brown. | ||
 |
3.2mm Brown 7.6m Solder Wick Desoldering B...T1219 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 3.20mm Brown. | ||
 |
50g Carbon Conductive GreaseH1630 |
|
| This carbon conductive grease can tolerate high temperatures (200°c) and keep electrically conductive metal free from rust & corrosion. | |
 |
50g Heatsink Thermal Paste Compound SyringeH1615A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 50g Syringe | |
 |
50g Silicone Dielectric GreaseT3127 |
| An electrically insulating grease which does not breakdown when high voltages are applied. Often applied to connectors and rubber gaskets for lubricating and sealing parts of the connector without arcing. 50g | ||
 |
Adhesive Glue 8406 20gmT3018 |
| Chemtools 8406 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength. | ||
 |
Ammonium Persulphate 500gmH0802A |
| A clean, safe to use etchant, white powder, mix with water 1:5 ratio. | ||
 |
Chemtools Potting Compound Silicone 200gm ...H1620 |
|
| Chemtools high quality two component Silicone Potting Compound is specially formulated for potting applications in the Electrical and Electronics industry. Chemtools PCT-7000 potting compounds offer good protection against impact damage and because of | |
 |
Clearcote Circuit Board LacquerT3176 |
|
| This circuit board lacquer is a general purpose resin coating for printed circuit boards. | |
 |
Conformal Coating Aerosol 400gT3175 |
| Provides a clear tough high gloss finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion. | ||
 |
Contact Cleaning Aerosol 350gT3160 |
|
| Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g - Non Ozone depleting - Safe on most plastics - Stops corrosion - Ideal for PCBs, tape heads, bu | |
 |
Contact Cleaning Lube Aerosol 175gT3061A |
|
| Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment. | |
 |
DEOX R30 Non-Stick Dry PTFE Lubricant 300gT3164 |
|
| Chemtools DEOX R30 non-stick dry PTFE lubricant is a Teflon® based spray that acts as a powerful dry lubricant. | |
 |
Electronic Cleaning Solvent Aerosol 175gT3066A |
| Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings. |