|
Description |
Downloads |
Specs |
Ordering |
|
 |
F1165 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 833mA
- Rated Power Consumption: 10W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Designed for long-life and minimal noise operation. Sunon fans are manufactured to a very high standard and hold CSA and UL listings. Note: Other models are available for your specific OEM requirements, please contact us for details.
Sunon< |
 |
F0010A |
|
- Connection: Flying Lead
- Air Flow: 8CFM
- Input Power: 1.1W
- Speed: 7000 RPM
- Noise Level: 32dBA
- Material: Thermoplastic
- Size: 40 x 40 x 10mm
- Bearing Type: Maglev
- Operating temperature: -10 - +70 deg. C
- Storage temperature: -40 - +70 deg. C
|
|
Premium quality Sunnon fan with "Maglev" bearing.
Ideal for replacing worn video card fans. |
 |
S6029 |
|
- Dedicated earth terminals
- Labels for customisation
- Red LED Indicates when fuse is broken
|
|
Uses standard automotive type blade fuses. Dedicated earth terminals for each circuit, plus 100A rated M8 negative & positive terminals. Size: 88W x 88D x 36Hmm |
 |
S6036 ROHS
|
|
- Cable
- Diameter: 2.9mm
- Size: 12AWG
- Temp rating: 105deg
- Max voltage: 600V
|
|
Suits standard size automotive blade fuses.
Cable Spec
Diameter: 2.9mm
Size: 12AWG
Temp rating: 105deg
Max voltage: 600V |
 |
D0010 |
|
|
|
A handy set of hardware to suit most computer equipment including hard drive screws, standoffs, case & fan screws. Includes case. 228pcs. |
 |
S6042 |
|
|
|
This in-line micro2 blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. |
 |
H5032 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels. |
 |
F1030 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Lubricated sleeve bearing system
- Frame Material:Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.125/0.11A
- Rated Power: 20/19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2550/2900 RPM ±10%
- Air Flow: 85/105 CFM
- Static Pressure: 0.25/0.30 Inch-H2O
- Noise Level: 43/48dB (A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1800V AC for one second
|
|
Connection: Terminals
Air Flow: 105CFM
Input Power: 20W
Speed: 2550 - 2900 RPM
Noise Level: 43dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 38mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic |
 |
F1045 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 45g
- Dimensions: 60 x 60 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 85mA (98mA max)
- Rated Power Consumption: 1.02W (1.18W max)
- Safety Power Consumption: 1.07W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3800 RPM ±15% at rated voltage
- Air Flow: 19.3 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 22.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for once minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
|
|
Connection: Flying Lead
Air Flow: 19.3CFM
Input Power: 1.1W
Speed: 3800 RPM
Noise Level: 29dBA
Material: Thermoplastic
Size: 60 x 60 x 25mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic |
 |
F1110 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 15.6g
- Dimensions: 40 x 40 x 10mm
- Electrical Characteristics
- Rated Voltage: 5V DC
- Rated Current: 136mA (157mA max)
- Rated Power Consumption: 0.68W (79W max)
- Safety Power Consumption: 0.83W
- Operating Voltage Range: 3.5~6V DC
- Starting Voltage: 3.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7000 RPM ±15% at rated voltage
- Air Flow: 8.0 CFM
- Static Pressure: 0.19 Inch-H2O
- Noise Level: 27.3dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
40mm Vapo/Maglev bearing fan for 5V dc applications. 7000rpm top speed. Thermoplastic construction. Quality Sunon brand. |
 |
H5031 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high.
Overall depth 255mm.
Mounting hole centres conform exactly to international racking specifications both vertically and horizontally. |
 |
S6109 ROHS
|
|
- SPL Output: 90dB @ 30cm
- Supply Voltage: 1.5 - 24V dc
- Current: 10mA @ 12V dc
- Frequency: 5200Hz ± 500Hz
- Dimensions: 22Ø x 12H mm
|
|
Panel mount piezo buzzer. 30mm between mounting hole centres. 80mm lead.
SPL output: 90dB @ 30cm
Supply voltage: 1.5 - 24V dc
Current: 10mA @ 12V dc
Frequency: 5200Hz ± 500Hz
Dimensions (mm): 22 x 12H |
 |
H4362 ROHS
|
|
- Cable Size: 4-8mm
- Chassis Hole: 15mm
- Colour: Black
- External Depth from Panel or Chassis: 30mm
|
|
Multi-piece right angle cable glands with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
F0950 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 105g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 200mA (230mA max)
- Rated Power Consumption: 2.40W (2.76W max)
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4200 RPM ±10% at rated voltage
- Air Flow: 53 CFM
- Static Pressure: 0.30 Inch-H2O
- Noise Level: 44.5dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Quality 80mm IP68 rated Sunon brand cooling fan. Suitable replacement for computer case and power supplies. Flying lead connections. |
 |
S6026 |
|
- 6.4mm terminals
- Rubber gasket
- Weatherproof cover
- LED indicator
|
|
This panel mount automotive blade fuse block uses standard automotive type blade fuses (18.7 x 19.1mm in size with 5mm blades). Fitted with weatherproof cover & LED indicator for each circuit. Base is fitted with 6.4mm spade terminals & rubber gasket to prevent water ingress. Max 25A @ 32VDC per circuit.
|
 |
F1046 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 33g
- Dimensions: 50 x 50 x 15mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.40W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7200 RPM ±15% at rated voltage
- Air Flow: 18.6 CFM
- Static Pressure: 0.31 Inch-H2O
- Noise Level: 38.1dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 18.6CFM
Input Power: 1.4W
Speed: 7200 RPM
Noise Level: 38.1dBA
Material: Thermoplastic
Size: 50 x 50 x 15mm
Bearing Type: Maglev Bearing
Blade Type: Plastic |
 |
S6019 |
|
|
|
This high current fuse block uses MIDI type fuses. Suits M5 ring terminals. 300A max. Size: 55Wx29Hx20Wmm. |
 |
F1164 |
|
- Mechanical Characteristics
- Motor Design: 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Bobbin Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 220g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 1000mA
- Rated Power: 12.0W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4500 RPM ±10%
- Air Flow: 150 CFM
- Static Pressure: 0.62 Inch-H2O
- Noise Level: 54dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart
|
|
Designed for long-life and minimal noise operation. Sunon fans are manufactured to a very high standard and hold CSA and UL listings. Note: Other models are available for your specific OEM requirements, please contact us for details.
Sunon< |
 |
F1260 |
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Single direction exhaust
- Mounting Holes: 2x 4.5mm holes
- Weight: 185g
- Dimensions: 97 x 94 x 33mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 600mA
- Rated Power: 7.2W
- Operating Voltage Range: 6~12V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3600 RPM ±10%
- Air Flow: 30.5 CFM
- Static Pressure: 0.92 Inch-H2O
- Noise Level: 55.8dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart, polarity protection
|
|
Voltage: 12V DC
Overall size (mm): 97.2 x 94.4 x 33
Speed (RPM): 3600
|
 |
H7910 |
|
|
|
Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035. |
 |
H0205 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
H3830 |
|
- Great on home theatre cabling, computers or gaming system components, even on small equipment hoses.
- Suitable for general purpose use - low temperature, typically indoors or sheltered outdoor use.
- Constructed from braided PET plastic material rated from -75 to 125 degrees C.
- Can be cut easily with common tools such as a hot knife, scissors and other cutters.
- Bends in tight radiuses.
- Offers excellent abrasion resistance.
- Suits single or bundled cables.
- Sold in 5m lengths.
|
|
A cylindrical self closing design which is expandable up to 3 times its original size. -75°C to +125°C. Made from PET plastic. Can be cut with hot knife or scissors. |
 |
F1130 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.125/0.11A
- Rated Power: 20/19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25° Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2750/3050 RPM ±10%
- Air Flow: 87/107 CFM
- Static Pressure: 0.26/0.32 Inch-H2O
- Noise Level: 45/50dB(A)
|
|
Connection: Terminals
Air Flow: 107CFM
Input Power: 19W
Speed: 3050 RPM
Noise Level: 50dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 38mm
Bearing Type: Ball Bearing
Blade Type: Plastic |
 |
H7906 |
|
|
|
Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035. |
 |
H0202 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
F1161 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 214g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 224mA
- Rated Power Consumption: 5.4W
- Operating Voltage Range: 10~27.6V DC
- Starting Voltage: 10V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 116 CFM
- Static Pressure: 0.26 Inch-H2O
- Noise Level: 44dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Voltage: 24V DC
Input Power (W): 5.2
Overall Size (mm): 120 x 120 x 38
Speed (RPM): 2600
Air Flow (CFM): 116
Noise (dBA): 44
Bearing Type: Ball Bearing
Connection Type: F/Lead
Frame Material: Thermoplastic
|
 |
H4996 |
|
- Black textured finish
- Modular design
- Four piece ABS construction
|
|
Similar in appearance to the deluxe full rack cases, these half rack modular cases offer great verstility to any product. |
 |
F1150 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 27CFM
Input Power: 1.4W
Speed: 2350 RPM
Noise Level: 25dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
 |
S6037 |
|
|
|
This in-line blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. Blade Type. |
 |
S5970 ROHS
|
|
|
|
Panel mount automotive blade fuse holder to suit standard size blade fuses (18.7 x 19.1mm in size with 5mm blades.) 4.8mm spade lug connection. Suits panel or chassis mount into enclosures or vehicle panels. |
 |
H0203 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
H8575 ROHS
|
|
|
|
Standard DIN rail in 1M length. 35mm top hat type. |
 |
H3996B |
|
|
|
Multi pack of hook and loop binding ties. Simply loop around multiple leads to hold them securely in place. Pack of 10 (2 of each colour).
Length: 100mm |
 |
S6024 ROHS
|
|
- Single screw terminal input
- 6x 25A spade terminal outputs
- Tin plated copper connections
|
|
This high current fuse block uses standard automotive type blade fuses. It features a single screw terminal 150A input and 6 x spade terminal 25A outputs. 150A total (25A per fuse) Max. Max Voltage 32VDC. Tin plated copper connections. Size: 93Wx40Hx67mm |
 |
T1466 |
|
|
|
Rare earth magnets contain neodymium compound combined with ferrite (anisotropic) to give extremely powerful magnetic properties compared to standard ferrite magnets. They come encased in nickel jackets to protect the inner material. 10 x 3mm Pk4 |
 |
S6032 |
|
- Uses standard automotive blade fuses
|
|
This panel / chassis mount fuse holder uses standard automotive blade fuses (18.7 x 19.1mm in size with 5mm blades). 150A screw terminal input and 6.3mm spade outputs (25A per circuit max). 32V DC max. Not suitable for use with S 5540 series resettable breakers.
Size: 47W x 86L x 36Hmm |
 |
F1025 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC Motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL 94V-0
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan
- Input Power: 4.1W
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.54W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10 - +70°C
- Storage Temperature: -40 - +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ± 10% at 24V DC
- Air Flow: 41.0 CFM (3.33 CFM min)
- Static Pressure: 0.18 Inch-H2O (0.13 Inch-H2O min)
- Acoustic Noise: 33.0dB (A) (37.2dB max)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ @ 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for 1 minute, 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic Restart
|
|
Connection: Flying Lead
Air Flow: 41CFM
Input Power: 1.8W
Speed: 3200 RPM
Noise Level: 33dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic
Operating temperature: -10 - +70 deg. C
Storage temperature: -40 - +70 deg. C |
 |
H1600A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
10g Tube |
 |
H1610A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
150g Tube |
 |
H4304A |
|
- Cable Size: 3 - 6.5mm
- Chassis Hole: 12.5mm
- Spanner Size: 19mm
- Colour: Black
- Material:PA (NYLON), UL 94
- Hermetic seal: NBR, EPDM
- O-Ring: EPDM
- Working temperature:
- - 40℃ to100℃ in static state
- Instantaneous heat resistance up to 120℃
- -20℃ to 80℃ in dynamic state
- Instantaneous heat resistance up to 100℃
|
|
Multi-piece cable gland with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
F1131 |
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 525g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.14/0.12A
- Rated Power: 24/22W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2500/2750 RPM ±10%
- Air Flow: 112/124 CFM
- Static Pressure: 0.30/0.28 Inch-H2O
- Noise Level: 44/47dB(A)
|
|
Connection: Terminals
Air Flow: 112CFM
Input Power: 24W
Speed: 2500 RPM
Noise Level: 44dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 38mm
Bearing Type: Ball Bearing
Blade Type: Plastic |
 |
F1028 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance Protection
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 295g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.09/0.08A
- Safety Current: 0.10/0.09A
- Rated Power: 18/16.5W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2000/2300 RPM ±10%
- Air Flow: 64/78 CFM
- Static Pressure: 0.13/0.16 Inch-H2O
- Noise Level: 43/46dB(A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Connection: Flying Lead
Air Flow: 77CFM
Input Power: 18W
Speed: 2000 - 2200 RPM
Noise Level: 45dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 25mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic |
 |
F1050 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 70mA (84mA max)
- Rated Power Consumption: 0.84W (1.01W max)
- Safety Power Consumption: 1.01W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Quality 80mm Sunon brand cooling fan. Suitable replacement for computer case and power supplies. Flying lead connections. |
 |
H3825 ROHS
|
|
|
|
Plastic extruded duct with cavity to protect or conceal cables across doorways or down walls. Supplied with self adhesive tap for easy installation. |
 |
F1160 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 383mA
- Rated Power Consumption: 9.2W
- Operating Voltage Range: 10~27.6V DC
- Starting Voltage: 10V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Voltage: 24V DC
Input Power (W): 9.2
Overall Size (mm): 120 x 120 x 38
Speed (RPM): 3100
Air Flow (CFM): 138
Noise (dBA): 48
Bearing Type: Maglev
Connection Type: F/Lead
Frame Material: Thermoplastic
|
 |
H5039 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
F1125 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 1.56W (1.80W max)
- Safety Power Consumption: 1.68W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ±10% at rated voltage
- Air Flow: 41.0 CFM
- Static Pressure: 0.18 Inch-H2O
- Noise Level: 33.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 37.5CFM
Input Power: 4.1W
Speed: 3200 RPM
Noise Level: 36dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
 |
H5038 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis' within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
F1151 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 92g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 140mA (161mA max)
- Rated Power Consumption: 1.68W (1.94W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3000 RPM ±10% at rated power
- Air Flow: 51.5 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 34.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 51.5CFM
Input Power: 1.68W
Power Current: 140mA
Static Pressure: 0.15 (inch-H20)
Speed: 3000 RPM
Noise Level: 34dBA |
 |
S6045 |
|
|
|
An inline fuse holder to suit the Automotive Maxi Blade Fuse ranging from models; S5343 to S5348. |
