Description | Downloads | Specs | Ordering | ||
---|---|---|---|---|---|
Electret Shotgun MicrophoneC0361 |
|
| This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju | ||
Phantom Power Supply with Mini XLRC0358 |
| Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne | |||
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | ||
Windsock to suit C8914C0348 |
| Spare windsock to suit | |||
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | |||
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | |||
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | |||
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | |||
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | |||
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | |||
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | |||
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | |||
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | |||
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | |||
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | |||
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | |||
Attenuator Volume Control 100W 100V Line W...A2339 |
| This controller has been designed to install to a double electrical flush box or wall mounting block. Massive 100 watt capacity available. 11 settings plus off. Fitted with a 24V override relay. 2 Year Warranty | |||
Balanced To Unbalanced Converter XLR-RCAA2513 |
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out. | |||
300mm Black Gooseneck Microphone ExtensionC0411 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Black. | |||
Studio Quality Entertainers Handheld Unidi...C0392 |
|
| This fine quality microphone has been styled on the famous Shure&trade Bros SM58. In our opinion the reproduction is every bit as good as the genuine article. Housed in a sturdy diecast body and fitted with a silent action reed type on/off switch. | ||
Attenuator Volume Control 5 Zone Evac 40W ...A2347 |
|
| May be configured to either five single inputs to five outputs or one input to five outputs. Each zone has a 40W and 100W load capacity respectively, with a total panel capacity of 200W and 500W. Has 11 settings plus 'off'. The input and outputs are conn | ||
Guitar Pickup Lead To Suit UHF Beltpack Tr...C8909 |
| Mini 3pin XLR to Mono 6.35mm Jack Plug suitable for connecting a guitar pickup to a Redback wireless beltpack transmitter. | |||
Gooseneck Shock Mount Microphone BaseC0484 |
| Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. Mounting hole size: 50.5mm. | |||
Unbalanced to Balanced Converter RCA-XLRA2514 |
| Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR with level control. -10dB max signal gain. |