| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
6 Zone Universal Remote Alarm WallplateA4577 |
|
| Designed to operate on 12 to 30VDC. This six input wall plate will sound a buzzer and illuminate a specific LED when an input is activated/triggered by a closing contact. A Cancel button allows the buzzer to be switched off whilst the LED indicator rema | |
 |
15U Rack Cable Support TrayH5575 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. | |
 |
15U 600mm Deep 19" Rack Frame Panel SetH5455 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 15U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
 |
Compact 100V Class D Bluetooth PA Mixer Am...A4260B NEW |
|
| This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. | |
 |
M6 Silver Pan Pozi Rack Bolt Jar 100pcsHC5386A |
| M6 x 16mm zinc plated Pack Qty: 100 | ||
 |
Paging Microphone Chime ModuleA4950 |
|
| By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. | |
 |
450mm Deep 19" Rack Frame Louvered Top PanelH5602 |
|
| A vented steel panel designed to suit the range of Black rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. | |
|
4U 450mm Deep 19" Rack Frame Panel SetH5604 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
Tour Guide System 2 Way Charging DockC8813 |
| A dual charging dock suitable for use with both the C 8810 and C 8812 tour guide system units. | ||
 |
Stereo to Mono RCA AdapterA2518 NEW |
| This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. | ||
 |
Portable PA Cover To Suit C721X 30W SeriesC7215 |
| Bag to suit Okayo portable PA models, C7206, C7207 and C7210. | ||
|
6U 450mm Deep 19" Rack Frame Panel SetH5606 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
Redback 4 Way MP3 Message PlayerA1717A |
|
| The A 1717A is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. | |
 |
600mm Deep 19" Rack Frame Bottom PanelH5601 |
|
| A top of bottom panel to suit 600mm rack frames. Powdercoated black. | |
 |
Protective Pouch To Suit C7195A/B BeltpackC7200 |
| Protective poromeric pouch to suit C7195A or C7195B beltpack lavalier transmitter. | ||
|
24U 600mm Deep 19" Rack Frame Panel SetH5464 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 24U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
 |
Line Level Compressor/LimiterA4948 |
|
| This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. | |
 |
3 pin XLR Wallplate with Microphone ClipC0449 |
|
| This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. | |
 |
3U Raw Aluminium 19" Rack PanelH5113 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
9U Perspex 19" Rack DoorH5709A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. | |
 |
Volume Control 40W 100V Line Clipsal Pro -...A2237 |
| This 40W volume control is designed for 100V line speaker systems. The volume control is fitted to a black Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. | ||
|
18U 600mm Deep 19" Rack Frame Panel SetH5458 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 18U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
|
15U 450mm Deep 19" Rack Frame Panel SetH5615 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
30U 600mm Deep 19" Rack Frame Panel SetH5470 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 30U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
|
600mm Deep 19" Rack Frame Louvered Top PanelH5603 |
|
| A vented steel panel designed to suit the range of 600mm rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. | |
|
18U Perspex 19" Rack DoorH5718A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. | |
|
24U 450mm Deep 19" Rack Frame Panel SetH5624 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
38U 600mm Deep 19" Rack Frame Panel SetH5478 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 38U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
|
18U 450mm Deep 19" Rack Frame Panel SetH5618 |
|
| This 18U panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels to suit the 450mm black rack frames. To add ventilation, we suggest using the H5602 vented top panel. | |
 |
Balanced Microphone/Line Pre AmplifierA4932 |
|
| This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. | |
 |
4.3" Zone Touch Wallplate For Source Contr...A4462 |
|
| This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). | |
 |
Zone Status Interface To Suit A4567A4568 |
|
| Designed to interface the A4567 Line monitoring unit with a fire indicator board. The addition of the A4568 enables you to monitor the status of each individual zone. | |
 |
Volume Control 10W 100V Line Clipsal Pro -...A2233 |
| Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. | ||
 |
Compact 100V Class D Bluetooth PA Mixer Am...A4262B NEW |
|
| These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. | |
|
38U 450mm Deep 19" Rack Frame Panel SetH5638 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
1U 1 Way 'D' Series Connector 19" Patch Pa...H5167 NEW |
|
| Pre-punched 1RU rack panel with single set of D series compatible mounting holes. This panel is ideal for test connections in 19" rack systems. Tough black powder coated finish. | |
 |
Aerobics Beltpack PouchC8915A |
| Soft protection pouch for beltpack (lavalier) transmitter units. | ||
 |
5 Pin XLR Black Wallplate With Microphone ...CB0458 |
| This 5 Pin XLR wall plate is fitted with a clip for holding supermarket style microphones (C0325 & C0326). | ||
 |
RCA to Cat5 Extender (Transmitter)A4944 |
| The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels. | ||
 |
Volume Control 40W 100V Line - HorizontalA2267A |
| New models supplied with two facia covers to suit your decor. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. | ||
 |
Canned Smoke For Testing Fire Alarm Detect...T3101 |
| Canned smoke allows you to meet fire system test requirements without contaminating the smoke detector. The unique formula does not affect detector sensitivity or increase the risk of false alarm. The smoke is non-toxic and dissipates quickly allowing you to test multiple detectors easily. 150ml Aerosol can | ||
 |
38U Steel 19"Rack DoorH5778A |
|
| These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 38U. | |
|
24U Steel 19" Rack DoorH5764A |
|
| These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 24U. | |
|
30U 450mm Deep 19" Rack Frame Panel SetH5630 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
Volume Control 40W 100V Line - Vertical BlackA2266A |
| New models supplied with two facia covers to suit your decor. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. | ||
 |
Compact 1RU Public Address (PA) Mixer 100V...A4235A |
|
| This compact 30W 1RU rack mount amplifiers is suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. Operates on 240V ac or 24V dc for battery backup operation. | |
|
30U Perspex 19" Rack DoorH5730A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 30U. | |
 |
Remote Alert Evac Bell UTP Wallplate to su...A4581V |
|
| The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. | |
|
9U Steel 19" Rack DoorH5750A |
|
| These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. | |
 |
100V Class H Public Address (PA) Power Amp...A4316A |
|
| This compact two channel Class-H design amplifier provides independent power amplifiers built into a single 1RU 19" rack mount chassis. It is ideal for use in environments where individual program sources are required in different building zones. Ideal for use in hotels, function centres, shopping malls and commercial offices. |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.
