|
Description |
Downloads |
Specs |
Ordering |
|
|
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
|
A1160 |
|
- Input
- Number of inputs: 1
- Video Input: HDMI
- Video Input Level: 0.7 - 1.4V (Peak to Peak)
- Video mode: PAL
- Audio input: Stereo
- Audio input level: 0.4 to 4.8V (Peak to Peak)
- Output
- Frequency Range: 177.5 MHz to 816.5 MHz (6 to 69)
- HDMI loop through: No
- Output level: 85dB
- MER: >38dB
- Delayed Audio
- Delayed audio output: No
- Delay: -
- Connection type: -
- Modulation
- Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
- Video compression: H.264 AVC (MPEG-4)
- Audio compression: MPEG Layer II / AAC
- Video bitrate SD: 1Mbps to 9Mbps (Default 5Mbps)
- Video bitrate HD: 12Mbps to 24Mbps (Default 24Mbps)
- LCN: AU (APN)
- Carrier: 2K/8K
- GI: 1/32
- FEC: 7/8
- Constellations: 16 QAM/64 QAM
- Management / Programming
- Front LCD: Yes
- Web GUI: Yes
- General
- Power supply type: External
- Power supply: 12VDC 1.5AMP
- Redundant PSU: No
- Operating temperature: 0°C to +45°C
- Storage temperature: 0°C to +60°C
- Dimensions: 236mm x 145mm x 34mm
- Weight: 0.88kg
|
|
Developed specifically for the commercial AV distribution market and the only Foxtel approved modulator on the market. Encodes HDMI signal to any DTV channel, providing an easy way to distribute AV signals throughout buildings. |
|
A1164 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- Foxtel approved
- Optimised 24mbps stream ideal for live sports viewing
- Pre-programmed Foxtel channel listing
- 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
- Full function front LCD for adjustments
- Web GUI interface for easy programming
- 2K/8K carriers
- Internal fan cooling system for long life span
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built in IR control allows TV locations to have IR control of AV equipment
|
|
Developed specifically for the commercial AV distribution market and the only Foxtel approved modulator on the market. Encodes four HDMI signals to any DTV channels, providing an easy way to distribute multiple high definition AV signals throughout buildings. |
|
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
|
A1171A |
|
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
- Compact surface mount package
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
|
A2696 |
|
- DAB+ band III digital tuner and analog FM tuner
- UPnP compatible - play music from PC’s on your network
- Internet radio station streaming
- USB playback
- MP3, AAC+, WMA-9 playback
- Wired or wireless 802.11b/g
- Includes remote control
|
|
Access over 14,000 internet radio stations & podcasts from around the world, sorted by country and genre. This standalone device requires only an internet connection (no computer required). |
|
A2696A |
|
- High quality 430mm metallic cabinet
- Aluminium front panel
- Wifi and Ethernet RJ45 connection
- DAB+/DAB/FM/Bluetooth
- 2.4" TFT display
- External wireless antenna for extended range - RCA analogue out
- Optical and coaxial output
- 6.35mm stereo jack
- Remote control
|
|
Upgrade your digital radio experience with this Internet Radio with Wi-Fi and DAB+. The tuner is an outstanding digital radio with a premium design and finely tuned audio performance. |
|
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
|
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
|
A2809A |
|
- Fully DVB-T compliant
- USB PVR ready for recording
- MPEG-4 AVC/H.264 HP@L4
- HDMI cable included
- Parental lock facility
- Supports teletext
- IR remote control
- 240V plugpack included
- HDMI and composite outputs
- 7-day electronic program guide (EPG)
- Multi-language subtitle output supported
- 12V DC operation suitable for use in vehicle
|
|
This 12V DC Powered HD set top box is great for caravans, RVs and vehicles. Incredibly compact, under 12cm wide! |
|
A2856A |
|
- USB PVR ready for recording
- MPEG-4 AVC/H.264 HP@L4
- Favourite service list editing
- Parental lock facility
- Supports teletext
- IR remote control
- Fully DVB-T compliant
- HDMI cable included
- HDMI and composite outputs
- 7-day electronic program guide (EPG)
- Multi-language subtitle output supported
|
|
This HD set top box features composite and HDMI outputs for HD televisions or connection to a PC monitor or projector.
|
|
A3057 |
|
|
|
This selector switches 3 stereo AV inputs between a single stereo AV output. RCA inputs/outputs. |
|
A3081E |
|
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4K. |
|
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |
|
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
|
A3087C |
|
|
|
Switch between up to 5 AV sources with these professional 4K ready HDMI switchers. Each includes an IR remote control and receiver unit, which allows the switcher to be mounted behind the TV or inside a cabinet. |
|
A3089A |
|
|
|
Switch between 5 HDMI AV sources with this professional 4K ready HDMI switcher. |
|
A3091 |
|
- Compliant to link with all DisplayPort input and output
- Complies with DisplayPort 1.4 specification
- Supports:
- 8K@30Hz
- 5K@60Hz
- 4K@120Hz, 60Hz
- 1440P@165Hz, 144Hz, 120Hz, 60Hz
- 1080P@165Hz, 144Hz, 120Hz, 60Hz
- (Depending on the system and the connected hardware)
- Supports OS: MAC OS X, Windows
- Supports HDR
- Supports 4:4:4, 4:2:2, 4:2:0
|
|
This bi-directional switch allows two DisplayPort equipped computers to be switched to a single monitor OR a single computer to be switched between two monitors. Easy push button operation for switching between devices. |
|
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
|
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
|
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
|
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
|
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
|
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |