|
Description |
Downloads |
Specs |
Ordering |
|
 |
P7526A |
|
|
|
Filtered VGA+3.5mm Stereo DE15 Male-Male Lead, 10m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
PA1913 |
|
|
|
USB type A socket to USB type C socket lead, 160mm. |
 |
H8136 |
|
|
|
For high ceilings, extension poles allow projector mounting surface to be adjusted. |
 |
P1556B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 5m - Category 6 |
 |
P5967 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
USB Type B wallplate Rear is fitted with 150mm fly lead and USB Type A plug for easy connection. |
 |
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
 |
P6506A |
|
|
|
10m TV aerial/antenna cable (PAL male to PAL male). |
 |
P1841B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Green 1m - Category 6 |
 |
P1616A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 5m - Category 6 |
|
P1554B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 2m - Category 6 |
|
P1613A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 1m - Category 6 |
 |
P6520 |
|
|
|
1.5m White TV aerial cable (PAL male to PAL male). |
 |
P1929 |
|
|
|
Change a USB A female connector to a USB A male connector on a cable or from a port. |
 |
P1670A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Green 0.5m |
|
P7524A |
|
|
|
Filtered VGA+3.5mm Stereo DE15 Male-Male Lead, 5m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
P6220A |
|
|
|
3 RCA Male to 3 RCA Male Composite Cable, 1.5m. |
 |
PB5947 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with HD9 female VGA connector, HDMI & 3.5mm audio. Supplied with both Clipsal and HPM style Front faceplates.
Black plate. |
 |
P7436 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve.
|
 |
PS1806B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
 |
P0251 ROHS
|
|
|
|
Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. |
 |
P5985 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with HD9 female VGA connector. Supplied with both Clipsal and HPM Front faceplates. |
 |
P0379 ROHS
|
|
|
|
RCA Male to 6.35mm Stereo Socket Adapter. |
 |
P1929A |
|
|
|
USB A male to USB A male joiner. |
 |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- Utilises quality Silicon Line GmbH German made chipset.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
P1683A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 2m |
Dynalink