|
Description |
Downloads |
Specs |
Ordering |
|
 |
P7357 |
|
- Convert complete VGA signal into HDMI output.
- Support the exchange between digital signal and analog signal.
- Support HDCP 1.0/1.1/1.2.
- Quick installation, simple operation without setting driver.
- Built-in conversion chip, support hot-swapping.
- VGA video input formats: 640x480, 720x576, 800x600, 1024x768,1280x720, 1280x768, 1280x960,1280x1024,1360x768, 1366x768, 1400x1050, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1080.
- HDMI video output formats:480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
|
|
Converts VGA signal to HDMI. Ideal for connecting VGA equipment to modern HDMI monitors & televisions. Supports virtual 7.1ch audio over HDMI or 3.5mm stereo output. |
 |
P5925 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with a HD9 female VGA connector. Supplied with two facia covers to suit your decor. |
 |
P5942 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
 |
P5920 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
 |
P5940 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
 |
P5944 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
 |
P5985 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with HD9 female VGA connector. Supplied with both Clipsal and HPM Front faceplates. |
 |
P5982 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Screw Terminal Type VGA Plates are fitted with HD9 female VGA connector and 4 blank mech spaces for individual configuration. Includes PCB mounted HD9 female VGA connector for easy on-site termination. Supplied with both Clipsal and HPM Front faceplates.
|
 |
P5980 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Screw Terminal Type VGA Plates are fitted with HD9 female VGA connector and 4 blank mech spaces. Includes PCB mounted terminal block connector. Supplied with two facia covers to suit your decor. |
 |
H8187 ROHS
|
|
- Mounts To: Wall
- Screen Size: 10 to 24"
- Max VESA Dimensions: 100 x 100mm
- Max Weight: 12kg
- Horizontal Adjustment: 100 deg.
- Vertical Tilt Adjustment: 100 deg.
- Depth From Mounting Surface: 150mm
- Bracket Dimensions: 100H x 140Wmm
|
|
Ideal for mounting smaller LCDs such as computer and security monitors, POS touch screens etc. A clever two piece design makes installation very easy. Suits VESA standard MIS-D 60, 75 & 100. Mounting is ≈150mm from wall. |
 |
H8185 ROHS
|
|
- Mounts To: Wall
- Screen Size: 10 to 24"
- Max VESA Dimensions: 100 x 100mm
- Max Weight: 12kg
- Horizontal Adjustment: 30 deg.
- Vertical Tilt Adjustment: 30 deg.
- Depth From Mounting Surface: 70mm
- Bracket Dimensions: 100H x 140Wmm
|
|
Excellent for restaurants, bars, hotels etc. where a compact LCD mount is required for touchscreens, registers etc. Also ideal for domestic installs. The clever two piece construction makes installation incredibly easy. Balljoint design permits 30° adjustment in all directions. |
 |
H8180A |
|
- Mounts To: Wall
- Screen Size: 10" - 26"
- Max VESA Dimensions: 75 x 75 to 100 x 100mm
- Max Weight: 25kg
- Tilt: Up and down 15°
- Swivel: 90°
- Distance to wall: 40 - 180mm
|
|
Ideal for LCD monitors in bars, restaurants, hotels, information areas etc. Distance from wall 40-180mm. Tilt up and down 15°. Swivel at 90°. Suits screens 10"-26" up to 25kg. Suits Vesa mounts 75 x 75 to 100 - 100mm |
 |
H8186 |
|
|
|
Steel powder coat adaptor plate with holes to suit standard VESA mount LCD screens and projectors
- 50x50
- 75x75
- 100x100
- 200x100
- 200x200 |
 |
S0160 |
|
- Switch type: DPDT
- Contact rating: 500mA @ 250V AC 1A @ 24V DC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- Dialectric strength: 1000V between poles
- Electrical life: >50,000 cycles
- Ingress protection rating: IP65
|
|
Alternate action latches in off position. Rotating the spring loaded actuator clockwise allows circuit to reconnect. |
 |
P1611A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 0.3m - Category 6 |
 |
P1680A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 0.3m |
|
P1612A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 0.5m - Category 6 |
|
P1681A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 0.5m |
|
P1613A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 1m - Category 6 |
|
P1682A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 1m |
|
P1614A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 2m - Category 6 |
|
P1683A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 2m |
|
P1615A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 3m - Category 6 |
|
P1684A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 3m |
|
P1616A |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male White 5m - Category 6 |
Dynalink