| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
3AG 10A Chassis Mount Fuse HolderS6000 ROHS |
| Panel mount. 10 amps at 250V AC. | ||
 |
55mm Fan Type HeatsinkH0520 |
|
| Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm. | |
 |
6-16V Surface Mount Siren Alarm PiezoS6120A |
|
| SPL output: 105dB @ 30cm Supply voltage: 6-16V DC Current: 150mA @ 12V DC Frequency: 1500Hz ± 3500Hz Dimensions(mm): 40H x 44W x 60L | |
 |
Micro U TO220 HeatsinkH0630 ROHS |
| To suit TO-126 or TO-220 flat pack semis. Thermal resistance: 28C/W. Dimensions: 19W x 19L x 9.5H | ||
 |
1.5V MES GlobeS4041 |
| 1.5V. 300mA. Miniature Edison Screw (MES). | ||
 |
100mm x 2.5mm Marker Nylon Cable Ties Natu...H4043A |
|
| Perfect for identifying individual cables or looms. Simply write on the tag with a marker. Colour : Natural Material : Nylon 66, 94V-2 8kg Tensile strength | |
 |
2A 5x20 (M205) 250V FuseS5734 ROHS |
| 250V. 2A. Glass fuse. Available in M 205 and 3AG sizes. Used in many appliances. | ||
 |
24mm Round Bolt On Rubber Feet Pk 4H0920 |
| Outer Diameter: 24 Height: 12 Mounting Hole: 3mm dia. Pack Qty: 4 | ||
 |
DIN Rail Mounting Clips Universal 1 PairH8496A |
| For mounting enclosures and project boxes to DIN rails. | ||
 |
M3 x 10mm Tapped Spacer Pk 8H1216 ROHS |
| Chrome Plated Brass. Tapped to suit metric M3 machine Screws Length: 10mm Pack Qty: 8 | ||
 |
100mm x 2.5mm UV Resistant Nylon Cable Tie...H4031A |
|
| Cable ties resistant to cracking or deterioration under exposure to UV light. ie sunlight. Black only. | |
 |
16mm Expandable Braided Cable Sheathing 5m...H3832 |
|
| A cylindrical self closing design which is expandable up to 3 times its original size. -75°C to +125°C. Made from PET plastic. Can be cut with hot knife or scissors. | |
 |
71x130x30mm ABS Grey Instrument CaseH0376 ROHS |
| A stylish range of 4 piece snap together, low profile, instrument cases. Each case has four faces which may be customised with screen printing or lexan. Internal PCB mounting posts are provided. Suitable for both handheld or desktop use. UL 94-HB 130W | ||
 |
3-6.5mm EG7/PG7 Grey IP68 Nylon Cable GlandH4305A |
|
| Multi-piece cable glands with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. | |
 |
16 x 22mm TO220 PCB Mount HeatsinkH0650 ROHS |
|
| Length:16mm Height:22mm Width:16.5mm Thermal Res.: 19C/W PCB hole: 2.2mm | |
 |
35x140x110mm ABS Grey/Black Instrument CaseH0472 ROHS |
|
| These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish. | |
|
2.5V MES GlobeS4042 |
| 2.5V. 300mA. Miniature Edison Screw (MES). | ||
 |
0.3A 100W 50V PTC FuseR4545A ROHS |
|
| Self resets when fault condition is removed. Hold Current is the maximum current at which the device will not trip at 20C. Trip Current is the minimum current at which the device will always trip at 20C. | |
 |
Black 12mm Cable Spiral Binding 10MH3811A |
| Spirals around cables to keep looms neat and tidy. Available in three sizes. 10m rolls. | ||
 |
90-240V AC Pigtail NeonS4010 ROHS |
| 90-250V AC. Requires series resistor depending on operating voltage. R = 240k Ohm @ 240V AC. | ||
 |
M205 10A Chassis Mount Safety Type Fuse Ho...S5992 ROHS |
| Panel mount. Cap is unscrewed by screwdriver. 10A @ 250V AC. UL/CSA Approved. Insulation resistance: 100M Ohm @ 500V DC Contact resistance: 5m Ohm @ 1A DC Dialectric strength: 1500V min (for 60 seconds) Material: UL94V0 thermoplastic. | ||
|
M3 x 10mm Tapped Spacer Pk 100H1217 ROHS |
| Chrome Plated Brass. Tapped to suit metric M3 machine Screws Length: 10mm Pack Qty: 100 | ||
 |
Red 12V DC Panel LampS4025 ROHS |
| 12V panel mount lamp indicators. Mounting hole 7mm. Current draw: 50mA Operational life: 5000-8000hrs | ||
 |
MES Type Globe HolderS4055 ROHS |
| Miniature Edison Screw (MES). Base | ||
 |
125Lx85Wx55Hmm IP65 Sealed ABS EnclosureH0304 ROHS |
|
| Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Supplied with a solid light grey lid (also available with a transparent lid, see H 0324). PCB mounting points are moulded into the |
