|
Description |
Downloads |
Specs |
Ordering |
|
 |
F1165 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 833mA
- Rated Power Consumption: 10W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MEC0381V1-000U-A99. A 12V DC 120mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F0010A |
|
- Connection: Flying Lead
- Air Flow: 8CFM
- Input Power: 1.1W
- Speed: 7000 RPM
- Noise Level: 32dBA
- Material: Thermoplastic
- Size: 40 x 40 x 10mm
- Bearing Type: Maglev
- Operating temperature: -10 - +70 deg. C
- Storage temperature: -40 - +70 deg. C
|
|
Sunon MF40101V1-1000U-A99. A 12V DC 40mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
S6042 |
|
|
|
This in-line micro2 blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. |
 |
S6029 |
|
- Dedicated earth terminals
- Labels for customisation
- Red LED Indicates when fuse is broken
|
|
Uses standard automotive type blade fuses. Dedicated earth terminals for each circuit, plus 100A rated M8 negative & positive terminals. Size: 88W x 88D x 36Hmm |
 |
S6036 ROHS
|
|
- Cable
- Diameter: 2.9mm
- Size: 12AWG
- Temp rating: 105deg
- Max voltage: 600V
|
|
Suits standard size automotive blade fuses.
Cable Spec
Diameter: 2.9mm
Size: 12AWG
Temp rating: 105deg
Max voltage: 600V |
 |
F1030 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Lubricated sleeve bearing system
- Frame Material:Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.125/0.11A
- Rated Power: 20/19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2550/2900 RPM ±10%
- Air Flow: 85/105 CFM
- Static Pressure: 0.25/0.30 Inch-H2O
- Noise Level: 43/48dB (A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1800V AC for one second
|
|
Sunon DP201A-2123HST.GN. A 240V AC 120mm Sunon Sleeve Bearing Cooling Fan with diecast aluminium frame. |
 |
H4362 ROHS
|
|
- Cable Size: 4-8mm
- Chassis Hole: 15mm
- Colour: Black
- External Depth from Panel or Chassis: 30mm
|
|
Multi-piece right angle cable glands with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
S6109 ROHS
|
|
- SPL Output: 90dB @ 30cm
- Supply Voltage: 1.5 - 24V dc
- Current: 10mA @ 12V dc
- Frequency: 5200Hz ± 500Hz
- Dimensions: 22Ø x 12H mm
|
|
Panel mount piezo buzzer. 30mm between mounting hole centres. 80mm lead.
SPL output: 90dB @ 30cm
Supply voltage: 1.5 - 24V dc
Current: 10mA @ 12V dc
Frequency: 5200Hz ± 500Hz
Dimensions (mm): 22 x 12H |
 |
D0010 |
|
|
|
A handy set of hardware to suit most computer equipment including hard drive screws, standoffs, case & fan screws. Includes case. 228pcs. |
 |
F1045 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 45g
- Dimensions: 60 x 60 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 85mA (98mA max)
- Rated Power Consumption: 1.02W (1.18W max)
- Safety Power Consumption: 1.07W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3800 RPM ±15% at rated voltage
- Air Flow: 19.3 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 22.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for once minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
|
|
Sunon EE60251S2-000U-999. A 12V DC 60mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
H5031 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high.
Overall depth 255mm.
Mounting hole centres conform exactly to international racking specifications both vertically and horizontally. |
 |
F1150 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80251V3-1000U-A99. A 12V DC 80mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
H5032 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels. |
 |
F1110 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 15.6g
- Dimensions: 40 x 40 x 10mm
- Electrical Characteristics
- Rated Voltage: 5V DC
- Rated Current: 136mA (157mA max)
- Rated Power Consumption: 0.68W (79W max)
- Safety Power Consumption: 0.83W
- Operating Voltage Range: 3.5~6V DC
- Starting Voltage: 3.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7000 RPM ±15% at rated voltage
- Air Flow: 8.0 CFM
- Static Pressure: 0.19 Inch-H2O
- Noise Level: 27.3dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF40100V1-1000U-A99. A 5V DC 40mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F1130 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current (240V AC): 0.11A
- Rated Power (240V AC): 19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25° Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics (at 240V AC)
- Rated Speed: 3050 RPM ±10%
- Air Flow: 107 CFM
- Static Pressure: 0.32 Inch-H2O
- Noise Level: 50dB(A)
|
|
Sunon DP201A-2123HBT.GN. A 240V AC 120mm Sunon Ball Bearing Cooling Fan with diecast aluminium frame. |
 |
H3830 |
|
- Great on home theatre cabling, computers or gaming system components, even on small equipment hoses.
- Suitable for general purpose use - low temperature, typically indoors or sheltered outdoor use.
- Constructed from braided PET plastic material rated from -75 to 125 degrees C.
- Can be cut easily with common tools such as a hot knife, scissors and other cutters.
- Bends in tight radiuses.
- Offers excellent abrasion resistance.
- Suits single or bundled cables.
- Sold in 5m lengths.
|
|
A cylindrical self closing design which is expandable up to 3 times its original size. -75°C to +125°C. Made from PET plastic. Can be cut with hot knife or scissors. |
 |
F1164 |
|
- Mechanical Characteristics
- Motor Design: 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Bobbin Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 220g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 1000mA
- Rated Power: 12.0W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4500 RPM ±10%
- Air Flow: 150 CFM
- Static Pressure: 0.62 Inch-H2O
- Noise Level: 54dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart
|
|
Sunon PMD1212PTB1-A(2).GN. A 12V DC 120mm Sunon Ball Bearing Cooling Fan with thermoplastic frame. |
 |
S6026 |
|
- 6.4mm terminals
- Rubber gasket
- Weatherproof cover
- LED indicator
|
|
This panel mount automotive blade fuse block uses standard automotive type blade fuses (18.7 x 19.1mm in size with 5mm blades). Fitted with weatherproof cover & LED indicator for each circuit. Base is fitted with 6.4mm spade terminals & rubber gasket to prevent water ingress. Max 25A @ 32VDC per circuit.
|
 |
H1600A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
10g Tube |
 |
F0950 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 105g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 200mA (230mA max)
- Rated Power Consumption: 2.40W (2.76W max)
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4200 RPM ±10% at rated voltage
- Air Flow: 53 CFM
- Static Pressure: 0.30 Inch-H2O
- Noise Level: 44.5dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Sunon GF80251B3-000U-AE9. A 12V DC 80mm Sunon Ball Bearing Waterproof Cooling Fan with thermoplastic frame. IP68 rated fan. |
 |
F1161 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 214g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 224mA
- Rated Power Consumption: 5.4W
- Operating Voltage Range: 10~27.6V DC
- Starting Voltage: 10V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 116 CFM
- Static Pressure: 0.26 Inch-H2O
- Noise Level: 44dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon EEC0382B2-000U-A99. A 24V DC 120mm Sunon Ball Bearing Cooling Fan with thermoplastic frame. |
 |
F1260 |
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Single direction exhaust
- Mounting Holes: 2x 4.5mm holes
- Weight: 185g
- Dimensions: 97 x 94 x 33mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 600mA
- Rated Power: 7.2W
- Operating Voltage Range: 6~12V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3600 RPM ±10%
- Air Flow: 30.5 CFM
- Static Pressure: 0.92 Inch-H2O
- Noise Level: 55.8dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart, polarity protection
|
|
Sunon PMB1297PYB1-AY(2).GN. A 12V DC 97mm Sunon Ball Bearing Cooling Fan with thermoplastic frame.
|
 |
H4996 |
|
- Black textured finish
- Modular design
- Four piece ABS construction
|
|
Similar in appearance to the deluxe full rack cases, these half rack modular cases offer great verstility to any product. |
 |
F1046 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 33g
- Dimensions: 50 x 50 x 15mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.40W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7200 RPM ±15% at rated voltage
- Air Flow: 18.6 CFM
- Static Pressure: 0.31 Inch-H2O
- Noise Level: 38.1dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF50152VX-1000U-A99. A 24V DC 50mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
H0205 |
|
- Dimensions: 82L x 54W x 30Hmm
- Material: ABS Starex SD-0160
- Flammability rating: UL94 HB
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
P8110 |
|
|
|
Perfect way to wrap cables, spare wire and extension leads your workspace or in the field. Tough high impact ABS construction with wall mounting holes. 2-20m cable length. Size: 350H x 180W x 63Dmm. |
 |
S6019 |
|
|
|
This high current fuse block uses MIDI type fuses. Suits M5 ring terminals. 300A max. Size: 55Wx29Hx20Wmm. |
 |
H8575 ROHS
|
|
|
|
Standard DIN rail in 1M length. 35mm top hat type. |
 |
H7910 |
|
|
|
Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035. |
 |
H3996B |
|
|
|
Multi pack of hook and loop binding ties. Simply loop around multiple leads to hold them securely in place. Pack of 10 (2 of each colour).
Length: 100mm |
 |
S5763 ROHS
|
|
|
|
250V. 15A.
Glass fuse.
Available in M 205 and 3AG sizes.
Used in many appliances. |
 |
H0299 ROHS
|
|
|
|
4 x AA battery contacts. |
 |
S5970 ROHS
|
|
|
|
Panel mount automotive blade fuse holder to suit standard size blade fuses (18.7 x 19.1mm in size with 5mm blades.) 4.8mm spade lug connection. Suits panel or chassis mount into enclosures or vehicle panels. |
 |
H1610A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
150g Tube |
 |
H4304A |
|
- Cable Size: 3 - 6.5mm
- Chassis Hole: 12.5mm
- Spanner Size: 19mm
- Colour: Black
- Material:PA (NYLON), UL 94
- Hermetic seal: NBR, EPDM
- O-Ring: EPDM
- Working temperature:
- - 40℃ to100℃ in static state
- Instantaneous heat resistance up to 120℃
- -20℃ to 80℃ in dynamic state
- Instantaneous heat resistance up to 100℃
|
|
Multi-piece cable gland with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
H0203 |
|
- Dimensions: 130L x 67W x 43Hmm
- Material: ABS Starex SD-0160
- Flammability rating: UL94 HB
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
H7906 |
|
|
|
Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035. |
 |
S6032 |
|
- Uses standard automotive blade fuses
|
|
This panel / chassis mount fuse holder uses standard automotive blade fuses (18.7 x 19.1mm in size with 5mm blades). 150A screw terminal input and 6.3mm spade outputs (25A per circuit max). 32V DC max. Not suitable for use with S 5540 series resettable breakers.
Size: 47W x 86L x 36Hmm |
 |
H0202 |
|
- Dimensions: 197L x 112W x 63Hmm
- Material: ABS Starex SD-0160
- Flammability rating: UL94 HB
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
H4312A |
|
|
|
Multi-piece cable gland with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
T1466 |
|
|
|
Rare earth magnets contain neodymium compound combined with ferrite (anisotropic) to give extremely powerful magnetic properties compared to standard ferrite magnets. They come encased in nickel jackets to protect the inner material. 10 x 3mm Pk4 |
 |
F1151 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 92g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 140mA (161mA max)
- Rated Power Consumption: 1.68W (1.94W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3000 RPM ±10% at rated power
- Air Flow: 51.5 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 34.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF92251V1-1000U-A99. A 12V DC 92mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F1025 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC Motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL 94V-0
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan
- Input Power: 4.1W
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.54W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10 - +70°C
- Storage Temperature: -40 - +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ± 10% at 24V DC
- Air Flow: 41.0 CFM (3.33 CFM min)
- Static Pressure: 0.18 Inch-H2O (0.13 Inch-H2O min)
- Acoustic Noise: 33.0dB (A) (37.2dB max)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ @ 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for 1 minute, 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic Restart
|
|
Sunon EF80252S1-1000U-A99. A 24V DC 80mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
S6041 |
|
|
|
This in-line low profile mini blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. |
 |
H8946 |
|
|
|
A handy collection of nylon hardware in M2.5 size. A commonly requested size for mounting development boards. Includes 120 hex nuts, 200 screws (4, 6, 10mm), 70 female-female standoffs (6, 8, 10, 12mm), 30 male-female standoffs (6, 12mm). |
 |
S5655 ROHS
|
|
|
|
250V. 2A.
Glass fuse.
Slow blow type.
M205 (5x20). |
 |
H7931 |
|
- UV stabilised ABS.
- Suitable for use in demanding environments from -40°C to +120°C.
- Includes internal base plate for mounting equipment.
- Stainless steel latches and hardware for longevity outdoors.
- IP66 rated.
|
|
A range of high strength ABS enclosures with UV stabilisation for external use. Suitable for housing terminal boxes, distribution panels, instruments and electrical equipment. Wide temperature range -40 to +120°C for demanding environments. |
 |
S6024 ROHS
|
|
- Single screw terminal input
- 6x 25A spade terminal outputs
- Tin plated copper connections
|
|
This high current fuse block uses standard automotive type blade fuses. It features a single screw terminal 150A input and 6 x spade terminal 25A outputs. 150A total (25A per fuse) Max. Max Voltage 32VDC. Tin plated copper connections. Size: 93Wx40Hx67mm |
 |
H3825 ROHS
|
|
|
|
Plastic extruded duct with cavity to protect or conceal cables across doorways or down walls. Supplied with self adhesive tap for easy installation. |
 |
H5039 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
F1131 |
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 525g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.14/0.12A
- Rated Power: 24/22W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2500/2750 RPM ±10%
- Air Flow: 112/124 CFM
- Static Pressure: 0.30/0.28 Inch-H2O
- Noise Level: 44/47dB(A)
|
|
Sunon A2123-HBL.(7).GN. A 240V AC 120mm Sunon Ball Bearing Cooling Fan with diecast aluminium frame.
|
 |
F1160 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 383mA
- Rated Power Consumption: 9.2W
- Operating Voltage Range: 10~27.6V DC
- Starting Voltage: 10V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MEC-0382V1-000U-A99. A 24V DC 120mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F1125 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 1.56W (1.80W max)
- Safety Power Consumption: 1.68W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ±10% at rated voltage
- Air Flow: 41.0 CFM
- Static Pressure: 0.18 Inch-H2O
- Noise Level: 33.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80252V1-1000U-A99. A 24V DC 80mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
H4150 |
|
- Simple twist together ends to easily harness your cable in a tidy loom.
|
|
Self adhesive base (13 x 25mm) sticks direct to chassis. Nylon 66, 94V-2.
Colour : Natural
Maximum Cable Diameter : 8.1mm |
 |
H5038 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis' within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
S6037 |
|
|
|
This in-line blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. Blade Type. |
 |
S6002 |
|
|
|
This 20A In-Line 3AG Fuse Holder is an In-line type with lead. Rated to 20A/32V DC & 20A/240V AC for high current use. Length: ≈230mm |
 |
H1615A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
50g Syringe |
 |
H3800A |
|
|
|
7mm inside diameter. Split along its length to allow easy cable entry.
Polypropylene (PP) |
 |
F1050 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 70mA (84mA max)
- Rated Power Consumption: 0.84W (1.01W max)
- Safety Power Consumption: 1.01W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Sunon EF80251S3-1000U-A99. A 12V DC 80mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
F1028 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance Protection
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 295g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.09/0.08A
- Safety Current: 0.10/0.09A
- Rated Power: 18/16.5W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2000/2300 RPM ±10%
- Air Flow: 64/78 CFM
- Static Pressure: 0.13/0.16 Inch-H2O
- Noise Level: 43/46dB(A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Sunon DP201AT-2122HSL.GN. A 240V AC 120mm Sunon Sleeve Bearing Cooling Fan with diecast aluminium frame. |
 |
S6054 |
|
- 8 way resealable plastic parts case.
- 180 pieces of popular sized grommets.
|
|
Contains 8 popular sizes of rubber grommets for protecting wiring, sealing out moisture and dust. |
 |
F1170 |
|
- Mechanical Characteristics
- Motor Design: Alveolate motor construction
- Motor Protection: Thermal protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: PC of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8 x 4.5mm holes
- Weight: 908g
- Dimensions: 171 x 151 x 51mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.11/0.11A
- Rated Power: 25/26W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2800/3200 RPM ±10%
- Air Flow: 203/239 CFM
- Static Pressure: 0.62/0.69 Inch-H2O
- Noise Level: 51/58dB(A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1800V AC for one second
|
|
Sunon A2175-HBT.TC.GN. A 240V AC 171mm Axial Sunon Ball Bearing Cooling Fan with diecast aluminium frame. |
 |
F1147 |
|
|
|
Sunon MF60252VX-1000U-A99. A 24V DC 60mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
S6045 |
|
|
|
An inline fuse holder to suit the Automotive Maxi Blade Fuse ranging from models; S5343 to S5348. |
 |
H5033 |
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels. |
 |
H1619B |
|
- High quality
- Convenient syringe tube design
- Easy to apply
- Excellent adaptability with wide temperature range
- Low oil separation, non-volatile
- Non-toxic, odourless, non-corrosiveness
|
|
This 1.0g Silver CPU Heatsink Thermal Paste Syringe is perfect for improving the temperature of your PC CPU processor or VGA card in your computer |
 |
F2011 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10%
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80251V3-1000U-G99. A 12V DC 80mm Sunon Maglev/Vapo Bearing 3 Wire Cooling Fan with thermoplastic frame. |
 |
HA8572 ROHS
|
|
|
|
Standard steel DIN rail in 175mm length.
|
 |
S6034 |
|
- Uses standard automotive blade fuses
|
|
These holders use standard automotive blade fuses.
150A screw terminal input and 6.3mm spade outputs
(25A per circuit max). 32V DC max. Not suitable for
use with S 5540 series resettable breakers.
S 6032 size: 47W x 86L x 36Hmm
S 6034 size: 95W x 86L x 36Hmm. |
 |
H0536 ROHS
|
|
|
|
Diecast heatsink without flange (ie: flat back). Length: 200mm
Thermal resistance: 0.78 deg C/W |
 |
H0545 ROHS
|
|
- Length:300mm
- Thermal Res. (80°C): 0.37°C/W
|
|
Includes machined mounting surfaces for semiconductors. H 0535, H 0538 and H 0542 have 35mm wide by 6mm flange for semis or PCB's. H 0545 has a machined flat rear surface only. Fins are matt black.
H 0535, H 0538, H 0542 45D x 75H mm.
(not including flang |
 |
S6020 |
|
|
|
This high current fuse block uses ANL type fuses.
Suits 4-2G cable.
200A max.
Gold plated connections.
Size: 124Wx38.5Hx37Wmm.
Fuse not included. |
 |
H5011 ROHS
|
|
- Raw aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high.
Overall depth 255mm.
Mounting hole centres conform exactly to international racking specifications both vertically and horizontally.
Internal height: 38mm |
 |
H3100 |
|
|
|
Nickel plated mounting screws for use with our solenoids.
Screw Pozi Dve Head M2 x 3
Pack QTY: 8 |
 |
H8452 ROHS
|
|
|
|
Easy snap fit construction DIN rail enclosure in 2 module width. Suits DIN EN60715 35mm top hat rail. Constructed from grey UL94V-0 polycarbonate. Three PCB positions allow greater flexibility in circuit design. Matching snap-on terminal guard |
 |
H7935 |
|
- UV stabilised ABS.
- Suitable for use in demanding environments from -40°C to +120°C.
- Includes internal base plate for mounting equipment.
- Stainless steel latches and hardware for longevity outdoors.
- IP66 rated.
|
|
A range of high strength ABS enclosures with UV stabilisation for external use. Suitable for housing terminal boxes, distribution panels, instruments and electrical equipment. Wide temperature range -40 to +120°C for demanding environments. |
 |
S6038 |
|
|
|
This in-line mini blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. |
 |
S6018 |
|
|
|
This high current fuse block uses MEGA type fuses. Suits M8 ring terminals. 250A max. Gold plated connections. Size: 129Wx44Hx37Wmm.
Fuse not included. |
 |
H0201 ROHS
|
|
- Dimensions: 157L x 95W x 53Hmm
- Material: ABS Starex SD-0160
- Flammability rating: UL94 HB
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
S6104 ROHS
|
|
- SPL Output: 80dB @ 10cm
- Supply Voltage: 3-16V DC
- Current: 7mA @ 12V DC
- Frequency: 4000Hz ±500Hz
- Pin Spacing: 7.6mm
- Dimensions: 14Ø x 7.5Hmm
- PCB Hole Size: 0.8mm
|
|
Fully sealed PCB mount piezo. 7.6mm pin spacing.PCB holes 0.8mm. |
 |
F1154 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 92g
- Dimensions: 92 x 92 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 75mA (87mA max)
- Rated Power Consumption: 1.80W (2.09W max)
- Safety Power Consumption: 1.92W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power ON/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3000 RPM ±10% at rated voltage
- Air Flow: 51.5 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 34.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF92252V1-1000U-A99. A 24V DC 92mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
T1464 |
|
|
|
Rare earth magnets contain neodymium compound combined with ferrite (anisotropic) to give extremely powerful magnetic properties compared to standard ferrite magnets. They come encased in nickel jackets to protect the inner material. 25 x 5mm |
 |
H8496 |
|
|
|
For mounting enclosures and project boxes to DIN rails. 30mm mounting hole spacing. Can be mounted to almost any size or type of enclosure
Hammond P/N 1427DINCLIP |
 |
H3863 |
|
|
|
Requires 60mm hole cutout. Includes neat flush fitting cap. |
 |
S5985 ROHS
|
|
- Use UL Approved Materials
- Low Cost
- Low Contact Resistance
- Flame Retardant
|
|
PCB mount with protective cover. 6.3 amps at 250V AC. 1.2mm PC pins at 23mm between centres |
 |
H0600 |
|
|
|
Adhesive backed. Ideal for providing additional cooling to PLCC chips.
10 x 10 x 10mm. |
|
F1047 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 45g
- Dimensions: 60 x 60 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 50mA (58mA max)
- Rated Power Consumption: 1.20W (1.40W max)
- Safety Power Consumption: 1.25W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4500 RPM ±15% at rated voltage
- Air Flow: 23.5 CFM
- Static Pressure: 0.21 Inch-H2O
- Noise Level: 27.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH,90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon EF60252S1-1000U-A99. A 24V DC 60mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
F1105 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 3x 3.2mm holes
- Weight: 10.5g
- Dimensions: 35 x 35 x 10mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 60mA (69mA max)
- Rated Power Consumption: 0.72W (0.83W max)
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 10,000 RPM ±15% at rated voltage
- Air Flow: 7.2 CFM
- Static Pressure: 0.22 Inch-H2O
- Noise Level: 28dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF35101V1-1000U-A99. A 12V DC 35mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
S5991 ROHS
|
|
|
|
Panel Mount. 10 amps at 250V AC. Cap retains fuse when removed. |
 |
H3821 NEW
|
|
- Compression Strength: 750N
- Impact Resistance: 2J
- UV Resistance: Extreme UV (T)
- Minimum Working Temperature: -5°C
- Maximum Working Temperature: +60°C
- Resistance to Bending: Pliable
|
|
7mm inside diameter. Split along its length to allow easy cable entry.
Polypropylene (PP) |
 |
S6140 ROHS
|
|
- SPL Output: 90dB @ 10cm
- Supply Voltage: 1.5 - 30V DC
- Current: 1.5mA @ 5Vp-p square wave
- Frequency: 4500Hz ± 500Hz
- Dimensions (mm): 30Ø x 5H
|
|
SPL output:90dB @ 10cm
Supply voltage:1.5 - 30V DC
Current:1.5mA @ 5Vp-p square wave
Frequency:4500Hz ± 500Hz
Dimensions (mm):30 x 5H |
 |
S4063 |
|
|
|
6x3.2mm globes as used in miniature equipment and model railways. Supplied without fly leads, 26mm legs. |
 |
C9780 |
|
|
|
This gold plated fuse holder will accept either 4 or 8 gauge cable. Also includes a mounting base for easy installation. Accepts 5AG fuses suitable for car sound systems. |
 |
H3812A |
|
|
|
Spirals around cables to keep looms neat and tidy. Available in three sizes. 10m rolls. |
|
S5659 ROHS
|
|
|
|
250V. 5A.
Glass fuse.
Slow blow type.
M205 (5x20). |
|
H4366 |
|
- Cable Size: 5-10mm
- Chassis Hole: 18.5mm
- Colour: Black
- External Depth from Panel or Chassis: 33mm
|
|
Multi-piece right angle cable glands with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
H3860 |
|
|
|
Requires 60mm hole cutout. Includes neat flush fitting cap. |
|
H3805A
|
|
|
|
22mm inside diameter. Split along its length to allow easy cable entry.
Polypropylene (PP) |
 |
S6127A |
|
- Supply Voltage: 12V DC
- Current: 200mA
- SPL Output: 108dB ±5dB
- Size: 85Ø x 40mm
|
|
Surface mount two tone siren suitable for indoor
or under eaves security applications. Supply voltage: 12V DC. Current: 200mA. SPL output: 108dB. Size: 85Øx40mm |
