Description Ordering
H0454 120Lx93.5Wx35H Diecast Aluminium Box

120Lx93.5Wx35H Diecast Aluminium Box

H0454 ROHS

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB's. Incorporates internal raised lip for the lid to seal against.
H0456 152Lx82Wx51H Diecast Aluminium Box

152Lx82Wx51H Diecast Aluminium Box

H0456

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB's. Incorporates internal raised lip for the lid to seal against.
H0472 35x140x110mm ABS Grey/Black Instrument Case

35x140x110mm ABS Grey/Black Instrument Case

H0472 ROHS

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.
H0474 40x225x165mm ABS Grey/Black Instrument Case

40x225x165mm ABS Grey/Black Instrument Case

H0474 ROHS

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.
H0476 65x260x180mm ABS Grey/Black Instrument Case

65x260x180mm ABS Grey/Black Instrument Case

H0476 ROHS

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.
H0478 171x121x55mm IP65 Sealed Polycarbonate Enclosure

171x121x55mm IP65 Sealed Polycarbonate Enc...

H0478 ROHS

The lid and base incorporate a tongue and groove sealing system with a neoprene gasket. Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture and dust. Internal guide slots for vertically mounting
H0480F 200x155x65mm ABS Grey/Black Instrument Case

200x155x65mm ABS Grey/Black Instrument Case

H0480F

Internal mounting posts enable a wide combination of PCB's, or transformers etc to be accommodated. PCB guide rails internally allow vertical PCB positioning in several locations. Removable front and rear panels. Attractive textured finish one side and pl
H0482 260x190x80mm ABS Grey/Black Instrument Case

260x190x80mm ABS Grey/Black Instrument Case

H0482

Internal mounting posts enable a wide combination of PCB's, or transformers etc to be accommodated. PCB guide rails internally allow vertical PCB positioning in several locations. Removable front and rear panels. Attractive textured finish one side and pl
H0486 Instrument Case Panel Black Aluminium Suits H0480

Instrument Case Panel Black Aluminium Suit...

H0486

Black alumimium panel for H0480, H0481.
H0487 Instrument Case Panel Black ABS Suits H0482-3

Instrument Case Panel Black ABS Suits H0482-3

H0487

ABS PVC panel for H0482, H0483.
H0500 68x35x89mm Silver Extruded Aluminium Equipment Enclosure

68x35x89mm Silver Extruded Aluminium Equip...

H0500

These rugged extruded silver anodised aluminium boxes are fitted with clear polycarbonate end caps for a professional finish. Extrusion has 5 PCB internal mounting ribs. Tough single piece extruded design. Includes four rubber feet.
H0502 113x35x119mm Silver Extruded Aluminium Equipment Enclosure

113x35x119mm Silver Extruded Aluminium Equ...

H0502

These rugged extruded silver anodised aluminium boxes are fitted with clear polycarbonate end caps for a professional finish. Extrusion has 5 PCB internal mounting ribs. Tough single piece extruded design. Includes four rubber feet.
H0504 115x51x119mm Silver Extruded Aluminium Equipment Enclosure

115x51x119mm Silver Extruded Aluminium Equ...

H0504

These rugged extruded silver anodised aluminium boxes are fitted with black aluminium end caps for a professional finish. Extrusion has 5 PCB internal mounting ribs. Tough single piece extruded design. Includes four rubber feet.
H0506 146x41x89mm Silver Extruded Aluminium Equipment Enclosure

146x41x89mm Silver Extruded Aluminium Equi...

H0506

These rugged extruded silver anodised aluminium boxes are fitted with black aluminium end caps for a professional finish. Extrusion has 5 PCB internal mounting ribs. Tough single piece extruded design. Includes four rubber feet.
H4994 Spare Front and Rear Panel To Suit H4996

Spare Front and Rear Panel To Suit H4996

H4994

H4994 is used to replace the front and rear panels of H4996 if required.
H4996 1U 9.5

1U 9.5" Half Rack Case

H4996

Similar in appearance to the deluxe full rack cases, these half rack modular cases offer great verstility to any product.
H5011 1U Raw Aluminium Front Panel 19

1U Raw Aluminium Front Panel 19" Rack Case

H5011 ROHS

Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high. Overall depth 255mm. Mounting hole centres conform exactly to international racking specifications both vertically and horizontally. Internal height: 38mm
H5031 1U Black Aluminium Front Panel 19

1U Black Aluminium Front Panel 19" Rack Case

H5031 ROHS

Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high. Overall depth 255mm. Mounting hole centres conform exactly to international racking specifications both vertically and horizontally.
H5032 2U Black Aluminium Front Panel 19

2U Black Aluminium Front Panel 19" Rack Case

H5032 ROHS

These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels.
H5033 3U Black Aluminium Front Panel 19

3U Black Aluminium Front Panel 19" Rack Case

H5033

These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels.
H5038 2U Sub-Chassis 19

2U Sub-Chassis 19" Rack Case

H5038 ROHS

This customisable rack case allows vertical or horizontal mounting of sub-chassis' within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided.
H5039 3U Sub-Chassis 19

3U Sub-Chassis 19" Rack Case

H5039 ROHS

This customisable rack case allows vertical or horizontal mounting of sub-chassis within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided.
H7899 200x80x200mm IP66 Lockable Steel Utility Wall Cabinet

200x80x200mm IP66 Lockable Steel Utility W...

H7899

Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035.
H7900 200x120x300mm IP66 Lockable Steel Utility Wall Cabinet

200x120x300mm IP66 Lockable Steel Utility ...

H7900

Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035.
H7904 200x120x400mm IP66 Lockable Steel Utility Wall Cabinet

200x120x400mm IP66 Lockable Steel Utility ...

H7904

Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035.

All prices include GST