|
Description |
Downloads |
Specs |
Ordering |
|
 |
X2384 NEW
|
|
- No wiring needed! Just bolt to the wall and the sun does the rest.
- 3 lighting modes with adjustable LED side panels
- Motion activated with ≈15 second on time.
- IP65 rated for water and dust resistance
- Internal rechargeable battery
- Ideal for adding instant security lighting to your home.
|
|
This compact motion activated solar powered flood light provides light wherever you need it due to its adjustable LED panels and cable free solar battery design. |
 |
X3229 NEW
|
|
- Simple installation anywhere with adhesive backing.
- Switches on automatically when motion is detected.
- 30 second "on" time.
- Fully self contained - no wiring required.
- Ideal for cabinets and wardrobes.
- Requires 4 x AAA batteries.
|
|
This affordable LED strip sensor light includes 1m of adhesive backed warm white LED strip and a PIR simple motion detect controller. It is ideal for wardrobes, cupboards and storage areas where LED lighting is only required when you open the door. |
 |
PW8405C NEW
|
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 1mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
10A 3 pin 2m white, bare ends, 6.4mm diameter. Energy Authority approved. |
 |
PW1989B NEW
|
|
- 1m length.
- USB 2.0 connectivity with speeds up to 480Mbps.
- Suits most operating systems.
- Compatible with both USB 2.0 and USB 3.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 3A.
- White outer sheath with metallic finish plugs.
|
|
USB 2.0 Type A Male to Type C Male
Length: 1m |
 |
PW1996C NEW
|
|
- 1m length.
- USB 3.1 connectivity with speeds up to 5Gbps.
- Suits most operating systems.
- Backward compatible with both USB 2.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 5A.
- White outer sheath with metallic finish plugs.
|
|
USB 3.1 Type C Male to C Male
Length: 1.0m |
 |
PW1994A NEW
|
|
- 1m length.
- USB 3.0 connectivity with speeds up to 5Gbps.
- Suits most operating systems.
- Backward compatible with both USB 2.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 3A.
|
|
USB 3.0 Type A Male to C Male
Length: 1m |
 |
PW1897A NEW
|
|
- 1.5m length.
- USB 2.0 connectivity with speeds up to 480Mbps.
- Suits most operating systems.
- Compatible with both USB 2.0 and USB 3.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
|
|
Type A Male to Micro B Male
Length: 1.5m |
 |
D2096A NEW
|
|
- Reliable wireless
- All-year power pack
- Plug-and-forget nano receiver
- Comfy, contoured shape
- Plug-and-play simplicity
|
|
With this wireless mouse, users can stay productive longer with the comfortable, contoured shape that follows the natural curve of your hand. As its compact and wireless, the mouse is ideal to take on the go. |
 |
T2266 NEW
|
|
|
|
Ideal for avoiding any nasty surprises at the airport before your next holiday. |
 |
P5968 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead wallplate fitted with USB Type C. Supplied with two facia covers to suit your decor. |
 |
P8159 NEW
|
|
- This feature keeps your connected appliances from getting damaged in a power surge condition. These conditions can be storm related or due to local power supply fluctuations. Unprotected power surges can seriously damage or shorten the life of your equipment.
|
|
Provides connection for all your appliances with surge protection and 4 way USB charger (max total 3.1A output. 2.1 single port). |
 |
A2275 NEW
|
|
- All wallplates assembled by Altronics are supplied with two facia clip on covers. These are designed to match your current decor. Simply clip on the desired cover after installation.
|
|
A combination of level control attenuator with 11 positions and 5 way audio source selector. |
 |
Z6296 NEW
|
|
|
|
Get your brand new Raspberry Pi Zero 2 W with most of the essentials in this kit. |
 |
X2391 NEW
|
|
- Produces a pure white light output (5500K colour temp)
- Frosted diffuser with central mount power switch
- Ideal for task lighting
- Simple fly lead connection
- 12-24V DC input
- Low profile design mounts into virtually any surface
- Ideal for interior or exterior use on caravans and campers
- IP65 rated for dust and moisture resistance.
|
|
Compact LED dome lights suitable for use in caravans, RVs and vehicles. |
 |
X2390 NEW
|
|
- Produces a pure white light output (5500K colour temp)
- Frosted diffuser
- Simple fly lead connection
- 12-24V DC input
- Low profile design mounts into virtually any surface
- Ideal for interior or exterior use on caravans and campers.
- IP67 rated for dust and moisture resistance.
|
|
Compact LED dome lights suitable for use in caravans, RVs and vehicles. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
P8164 NEW
|
|
|
|
Ideal for the work bench, this 2 way power extension board features 2 x type A USB chargers and 20W USB type C PD charging output. Plus a 10W wireless charger holder to keep your phone charged up while you work. |
 |
N2019D NEW
|
|
- Suits lead acid type batteries
- Suits lithium chemistry batteries, including Li-NiCoMn & LiFePO4.
- Adjustable daytime start, night off mode
- Auto battery identification
- Intelligent PWM charging
- Temperature compensation
- USB 2A charger (4 ports)
- Overload, reverse polarity, reverse discharge, over heat, under voltage protections
|
|
Suitable for permanent installations of lead acid, gel battery and lithium chemistry (including Li-NiCoMn & LiFePO4) solar panel systems. |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |