|
Description |
Downloads |
Specs |
Ordering |
|
 |
D4211 NEW
|
|
- Five 10/100/1000Mbps RJ45 ports
- Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable
- Supports PoE power up to 65 W for all PoE ports*
- Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and Easy Smart Configuration Utility simplify configuration
- Fanless design lowers energy consumption and eliminates operating noise
|
|
Professional 5-Port Gigabit Easy Smart Switch with 4-Port PoE+
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance |
 |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
 |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
K8670 NEW
|
|
- Over 26 robots can be assembled as well as custom projects
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- Superbot brings you endless fun in building, playing then battling with their car models together which makes it the new pop in any kids' theme party.
- The set is packed in a clear storage box to help children develop a good habit of packing and collecting their own toys.
|
|
A 400pc set allowing kids to build up to 26 different projects, and create designs of their own. Includes control unit and intelligent sensors (2) that allow building of line tracking, obstacle avoiding and following robot designs. Blocks are compatible with other major brands. Fully programmable using Scratch. Includes storage box. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
Z6302J NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 4GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
 |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
 |
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
 |
A3607 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts a HDMI source device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
These wireless extension cables provide a simple way to send 1080p 60Hz signals from a HDMI source device to TV or monitor in another room up to 50m away (line-of-sight). |
 |
RT4808A NEW
ROHS
|
|
|
|
High temperature rating (105°C ) for constant, reliable operation.
2K reel and tape pack.
Note: Sleeve colour may be black or green. |
 |
R9572B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
 |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
 |
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
 |
D4456 NEW
|
|
- Wide Frequency Band supporting all mobile carriers
- Low Insertion Loss
- Low VSWR
- High Isolation
- Widely used in IBS & DAS
|
|
The Blackhawk range of power splitters are ideal for connecting multiple devices to a single antenna. Ideal for M2M modems, mobile broadband routers, and USB modems with external antenna ports. |
 |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
 |
D5516A NEW
|
|
- Form Factor: 3.5"
- Cache: 256MB
- Capacity: 2TB
- Interface:SATA
- Product Description: WD Purple WD22PURZ - hard drive - 2 TB - SATA 6Gb/s
- Type: Hard drive - internal
- Data Transfer Rate: 600 MBps
- Buffer Size: 256 MB
- Features: Advanced Format technology, AllFrame, Conventional magnetic recording (CMR), support up to 64 cameras
- Dimensions (WxDxH): 101.6 mm x 147 mm x 26.1 mm
- Weight: 450 g
- Manufacturer Warranty: 3-year warranty
- Drive Transfer Rate: 600 MBps (external)
- Internal Data Rate: 175 MBps
- MTBF: 1,000,000 hours
- Non-Recoverable Errors: 1 per 10^14
- Load / Unload Cycles: 300,000
- Interfaces: 1 x SATA 6 Gb/s
- Compatible Bay: 3.5"
- Power Consumption: 3.8 Watt (read/write), 3.2 Watt (idle), 0.3 Watt (standby), 0.3 Watt (sleep)
- Compliant Standards: RoHS 2011/65/EU
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 65 °C
- Min Storage Temperature: -40 °C
- Max Storage Temperature: 70 °C
- Shock Tolerance (operating): 30 g @ 2 ms
- Shock Tolerance (non-operating): 250 g @ 2 ms
|
|
Latest generation Western Digital 'WD purple' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week. Model: WD22PURZ.
|
 |
SG4560A NEW
|
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
H8232B NEW
|
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
 |
D0521 NEW
|
|
- High 100W output for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
 |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
 |
T1533B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. |
 |
CL8894D NEW
|
|
|
COMING SOONThis item is arriving soon. |
A dual charging dock suitable for use with CL8892D and CL8893D USB C rechargeable microphone transmitters. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
S9128C NEW
|
|
- Video Output Mode: AHD/TVI/CVI: 8M@15fps;
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor;
- minimum Illumination：0.01Lux，
- Infrared Distance：25m；
- 2.7-13.5mm lens;
- Support OSD Menu;
- Support WDR;
- Housing: Metal, IP67
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |
|
R9438B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
 |
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |
 |
S9810A NEW
|
|
- H.264, H.265+, JPEG, MJPEG compression
- 5 megapixel @ 30fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
K8672 NEW
|
|
- Build more than 100 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 23 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organise the building blocks based on the colour and size.
|
|
The Robot Master sets supports the building of up to 200 different robotic projects from simple to complex, allowing kids to progress their STEM skills up with staged lessons. |
 |
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
 |
H1983B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
 |
H1848B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
 |
S9845B NEW
|
|
- 4 x 18650 replaceable batteries with 5W solar panel recharging
- Includes wall mount bracket
- LED floodlight on motion detect (selectable)
- Two way audio (mic & speaker in-built)
- 3.6mm (120°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- SD card slot (up to 64GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. |
|
Z6302K NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 8GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
 |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
 |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
 |
C7124 NEW
|
|
- 20W power output
- 12-15 hours usage between charges
- Includes high performance wireless headset for a high level of clarity
- Body worn or self standing
- Bluetooth 5.0 for up to 200m range
- Micro SD card slot & USB A for media playback and recording
- TWS pairing to a second unit
- Ideal for training, demonstration and education environments
- USB type C rechargeable (cable included)
- Aux and mic inputs (3.5mm cable included)
- USB mains charger included
|
|
A compact portable PA system with headset, providing a way to increase the volume of your voice when addressing small crowds. |
 |
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
 |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
COMING SOONThis item is arriving soon. |
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
COMING SOONThis item is arriving soon. |
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
 |
S9344P NEW
|
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
|
|
This 4 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). |
 |
S9365A NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF S/T support
|
|
This multi-channel network video recorder offers 8MP (4K) resolution recording at 25fps per camera. |
 |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
 |
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
 |
T1285A NEW
|
|
- Power: 320W
- Voltage: 220-240V 50Hz
- Air pump: Diaphragm pump
- Capacity: 24L/min (max)
- Hot air temperature: 160-480°C
- Sensor: K thermocouple
|
|
This re-work station provides a quick and easy way to rework boards fitted with surface mount devices. |
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
 |
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
 |
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
K8673 NEW
|
|
- Build more than 200 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 47 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organize the building blocks based on the colour and size.
|
|
Build up to 200 different projects or create your own! Great for inspiring kids to invent and design with staged learning from the basics up to advanced Scratch programming. Each set contains hundreds of blocks, plus multifunction sensors, programmable motor and host controller. Compatible with big brand name blocks.
|
 |
A4874 NEW
|
|
|
|
Designed to work with the C0897 IP speaker & mic receiver system. |
 |
A4937 NEW
|
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Bluetooth audio streaming receiver in-built
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music. |
 |
D4344 NEW
|
|
- Faster Connections: Wi-Fi 6 speeds up to 1,800 Mbps—1,201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.
- Connect More Devices: OFDMA and MU-MIMO technology quadruple capacity to enable simultaneous transmission to more devices.
- Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home Wi-Fi signal generated by Wi-Fi 6.
- Ultra-Low Latency: Greater reduction in latency enables more responsive gaming and video chatting.
- One Unified Network: Multiple units form a whole-home network that auto-selects the best connection as you move around your home.
- Total Security: WPA3 encryption and TP-Link HomeShield provide personalized features, including Parental Controls, Antivirus, and Quality of Service (QoS) to ensure a safer online experience.
- Setup Made Easier Than Ever: The Deco app walks you through setup step-by-step.
|
|
Armed with Wi-Fi 6 technology, Deco X20 whole home mesh Wi-Fi is designed to deliver a huge boost in coverage, speed, and total capacity. Get on the latest mesh Wi-Fi to enjoy the future network that loads faster and connects more. |
 |
A4962 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4960 microphone transmitter wall plates which connect to the local microphone.
|
COMING SOONThis item is arriving soon. |
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
A4465 NEW
|
|
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver. |
 |
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
 |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
 |
Q1340B NEW
|
|
- Single way to test plug crimping quality
- Wire tracing & cable mapping at the same time
- Easily locate the port with a flashing signal
- PoE switches & STP wire tracing up to 3KM
- Telephone line status/polarity indication
- Cable mapping & status indication up to 300M for continuity, shorts, opens and crossover
- Fast/slow scan function
- Display cable status and troubleshoot wiring
- Non- contact voltage detecting
|
|
This Noise-Filtering Network PoE Toner & Probe allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
 |
S8871C NEW
|
|
- Low blue light/flicker free
- AMD FreeSync technology
|
|
A perfect all around display with stunning images that stretch from edge to edge. Features a compact slim design that will look smart in any space. |
 |
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
 |
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
 |
P7462A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
M8025 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
PA7432 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 30m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
 |
P7463A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
CL8892D NEW
|
|
- USB rechargeable with internal lithium battery
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
|
COMING SOONThis item is arriving soon. |
Wireless handheld 700 channel microphone ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
S9749A NEW
|
|
- Ultra-Fast Wi-Fi 6 Speeds
- 4× increased capacity to connect more devices simultaneously
- Integrated into Omada SDN
- Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming
- PoE+ Support
- Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
|
|
This high performance ceiling mount wireless access point for general corporate Wi-Fi features the latest 802.11ax technologies like 1024 QAM and Long OFDM Symbol, which allows the EAP to boost overall speeds up to 1775 Mbps (1201 Mbps on a 5 GHz band and 574 Mbps on a 2.4 GHz band) |
 |
H1844A NEW
|
|
- Cable Entry Size: 4-6mmØ
- Stud: 6.3mm
- Max. voltage 300V
|
|
Spade type with double crimp. |
 |
P7464A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. 40m |
 |
N1114A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection.
|
|
S9832C NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS Sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- Internal POE
|
|
A day/night high resolution IP dome camera with multi-codec support. |
 |
A4515 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Australian designed and manufactured.
|
COMING SOONThis item is arriving soon. |
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
|
S9833B NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- With Internal POE and External SD Card Slot
|
|
This compact 8MP dome/turret camera utilises a 1/2.8' SONY Starvis Back-Illuminated CMOS Sensor for a crisp clear view day or night. |
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
S9847 NEW
|
|
- 4MP 1440P quad HD recording
- 2.4GHz Wi-Fi
- 123° wide angle lens
- Secure cloud storage
- Motion detection up to 10m away
- Colour & IR night vision modes
- Micro SD card storage up to 128GB
- Two way audio intercom
- Cloud AI detection
- Indoor or outdoor use
- Rechargeable li-ion battery (via USB or solar panel)
- IP65 rated
- Siren & flashing light
- 3 activity zones
- Simply DIY install - no cabling!
|
|
A 4MP security camera that requires no wiring at all due to its internal battery and external solar panel (which can be remote mounted up to 4m away in a sunny spot). |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
H5394B NEW
|
|
|
|
Captive nuts M6
Pack Qty: 1000 |
 |
P7465A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
K8600A NEW
|
|
- Simple set up - get printing within 20 minutes.
- Worry free automatic levelling.
- Easy to understand user interface with colour display.
- Auto filament loading and unloading.
- Direct extrusion for most common filament types.
- Ultra stable design with rigid dual Z-axis.
- Compact design fits easily on the workbench.
- Standard 0.4mm nozzle.
- 220 x 220 x 250mm build volume.
|
|
The Ender-3 V3 SE 3D printer is an enhanced and upgraded version of Creality's hugely popular Ender 3 platform. Creality have built in more features and optimisation for an intuitive and efficient FDM 3D printing experience. This Ender 3 has been tailored for those wanting a no compromises approach to features. |
 |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
 |
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
 |
S9367D NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
H1312 NEW
|
|
|
|
Tapped to suit metric M2 machine Screws
Length: 16mm
Pack Qty: 1000 |
 |
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
