|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
S9847 NEW
|
|
- 4MP 1440P quad HD recording
- 2.4GHz Wi-Fi
- 123° wide angle lens
- Secure cloud storage
- Motion detection up to 10m away
- Colour & IR night vision modes
- Micro SD card storage up to 128GB
- Two way audio intercom
- Cloud AI detection
- Indoor or outdoor use
- Rechargeable li-ion battery (via USB or solar panel)
- IP65 rated
- Siren & flashing light
- 3 activity zones
- Simply DIY install - no cabling!
|
|
A 4MP security camera that requires no wiring at all due to its internal battery and external solar panel (which can be remote mounted up to 4m away in a sunny spot). |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
H5394B NEW
|
|
|
|
Captive nuts M6
Pack Qty: 1000 |
 |
P7465A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
COMING SOONThis item is arriving soon. |
This commercial grade bluetooth 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Audio output is via standard stereo RCA sockets or balanced audio over UTP RJ45 cabling for connection to compatible Redback products. |
 |
K8600A NEW
|
|
- Simple set up - get printing within 20 minutes.
- Worry free automatic levelling.
- Easy to understand user interface with colour display.
- Auto filament loading and unloading.
- Direct extrusion for most common filament types.
- Ultra stable design with rigid dual Z-axis.
- Compact design fits easily on the workbench.
- Standard 0.4mm nozzle.
- 220 x 220 x 250mm build volume.
|
|
The Ender-3 V3 SE 3D printer is an enhanced and upgraded version of Creality's hugely popular Ender 3 platform. Creality have built in more features and optimisation for an intuitive and efficient FDM 3D printing experience. This Ender 3 has been tailored for those wanting a no compromises approach to features. |
 |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
 |
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
COMING SOONThis item is arriving soon. |
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
 |
S9367D NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
P7439A NEW
|
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
H1312 NEW
|
|
|
|
Tapped to suit metric M2 machine Screws
Length: 16mm
Pack Qty: 1000 |
 |
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A2734 NEW
|
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
 |
C5215 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
C5216 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
A4026 NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024. |
 |
R9627B NEW
|
|
|
|
SMD Bipolar Capacitor |
 |
D4214 NEW
|
|
- 16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots
- High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*
- Working with IEEE 802.3af/at compliant PDs
- Plug and play, with no configuration and installation needed
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ℃)
|
|
Plug and Play, Multi-Purpose PoE Switch with Powerful Performance |
 |
D4345A NEW
|
|
- Internet Everywhere with 4G+ Speed - Provides WiFi 6 Mesh coverage through 4G+ CAT6 access
- Superior WiFi 6 speeds up to 1.8 Gbps - 1201 Mbps (5 GHz) and 574 Mbps (2.4 GHz) dual-band WiFi with WiFi 6 technology
- Fully Gigabit Ethernet - 3x Gigabit WAN/LAN Ethernet ports provide flexible internet access at warp speed**
- TP-Link HomeShield - Real-time IoT and network protection, robust Parental Controls, and comprehensive reports
- 3G/4G Failover - Flexible access from Ethernet to 3G/4G to prevent data loss
|
|
Armed with a built-in 4G+ modem, WiFi 6, and TP-Link Mesh technology, Deco X20-4G delivers hassle-free 4G internet sharing with a superior whole-home mesh WiFi experience. Plug your SIM card in and enjoy! |
