|
Description |
Downloads |
Specs |
Ordering |
|
|
P0065A NEW
|
|
|
|
6.35mm mono chassis mount socket with SPST contact switch. |
|
P1968 NEW
|
|
- Superspeed USB+ 10Gbps transfer speeds
- 100W power delivery for fast recharging of devices
- 3m length
- Ideal for connection to USB hubs with multiple peripherals
- Suitable for high resolution monitors and external drives requiring high data speeds
|
|
This type-C to type C USB cable features USB 3.2 Gen 2 compatibility and can be used to connect and power a variety of USB type C equipped devices. |
|
P1967 NEW
|
|
- Superspeed USB+ 10Gbps transfer speeds
- 100W power delivery for fast recharging of devices
- 1m length
- Ideal for connection to USB hubs with multiple peripherals
- Suitable for high resolution monitors and external drives requiring high data speeds
|
|
This type-C to type C USB cable features USB 3.2 Gen 2 compatibility and can be used to connect and power a variety of USB type C equipped devices. |
|
D2339A NEW
|
|
- Supports up to 1920 x 1080 @ 60Hz.
- Stylish brushed aluminium finish.
- Use with USB type A devices.
- Suitable for use with A-C adapter (sold separately) for connection to USB C devices.
- Plug and play, no external power required.
- Supported by most operating systems & devices.
|
|
This USB 3.0 to HDMI graphics adapter turns an available USB 3.0 port into an HDMI output. |
|
P8166 NEW
|
|
- 240V AC 10A outputs.
- 7 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- High surge protection.
- Overload protection.
- Power cord located at the rear for less interference.
- 19” rack ear mounting.
|
|
The neat solution to supplying mains power to your mounted equipment. |
|
A4026 NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024. |
|
X3219A NEW
|
|
|
|
Designed to work in conjunction with X3216A strip lighting. |
|
T2691A NEW
|
|
|
|
Hot air tip to suit Iroda lithium T2690A and T2694A only. |
|
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
|
P7818B NEW
|
|
- Cable Entry: 3.2mm.
- Max Insulation Diameter: 11mm
- Rated current: 75A
- Rated voltage: 600V
- Insulation Resistance: 5000MΩ
- Average contact Resistance(micro-ohms):<180 1-5.
- Voltage Proof: 2200V(DC)
- Life Without load(Contact/Disconnect Cycles):To 10000
- Life With Load (Hot Plug 250 Cycles&120V): 50A
- Flammability:UL94 V-0
- Contact Barrel Wire Size(AWG):6~12AWG
- Connector holding force(LBF):250N Min
- Environment Temperatures:-20℃ to 125℃
|
|
Genuine Anderson Power DC 600V connector. |
|
Z0890A NEW
|
|
- Emitted Colour: Red
- Lens Appearance: Red, Diffused
- Power Consumption: 180mW (typical)
- Operating Voltage: 3 (min.), 11V (typ.) 12V (max.)
- Luminous Intensity: 70-150mcd
- Flash Frequency: 2Hz
- Peak Forward Current: 100mA (max)
- Continuous Forward Current: 30mA (max)
- Reverse Voltage: 5V (max)
- Reverse Current: 1µA (max)
- Wave Length: 620nm
- Beam Angle: 60°
|
|
5mm Red Flashing LED |
|
K9641 NEW
|
|
|
|
An assortment of straight pin boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties (10 of each plug and socket). Plus crimp pins to suit plug housings. 150pcs total. |
|
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
|
K-8600D NEW
|
|
|
|
Replacement teflon bowden tubing to suit Creality Ender and other brands/types of 3D printer. 1m length. |
|
S4133 NEW
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max Switching Current: 0.5A AC, 2A DC (1A DC for UL approved applications)
- Max VA (Watts): 62VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 64.3Ω
- Max Coil Power: 140mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: 14W x 9L x 5H mm
|
|
Fully sealed construction. 3V coil.
|
|
X7100 NEW
|
|
- Jumbo clock digits - read up to 30m away!
- Calendar display.
- Day of the week display.
- Temperature & humidity display.
- Programmable alarm with snooze function.
|
|
This handy jumbo LCD 12/24 hour clock, thermometer and calendar is great for around the home or office. The extra large clock digits allow it to be read up to 30m away. The screen also provides date, day of the week, temperature and humidity readings. |
|
Z0726 NEW
|
|
|
|
3mm Bi-colour LED 3 Leg Red/Green Water Clear |
|
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
|
P7805B NEW
|
|
- Amperage Rating: 30A
- Contacts Supplied: No
- Oper. Volt (AC): 600V
- Oper. Volt (DC): 600V
- Type: Contact
- RoHS: Yes
- Wire Size (AWG): 12-16
- Wire Size (mm²): 1.3-3.3
|
|
High current DC connectors as used in automotive and industrial applications. Anderson PowerPole Style. |
|
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
|
P7874A NEW
|
|
|
|
This dust plug to suit P7835A/36A high current DC Anderson power connector a provides protection for the connector against dust. |
|
M8623C NEW
|
|
- Standard USB charging and QC 3.0 charging ports.
- Easy to use - just plug in and turn on your ignition to charge.
- Great for keeping your devices charging whilst in the car.
- Sleek design with light up ring so you can find it at night.
- Battery voltage meter in-built.
|
|
This dual charger allows you to power up to two devices in your car. Max combined current output is 5.5A. |
|
X0604C NEW
|
|
- FM transmitter
- Easily portable
- Dual USB car charger
- USB Port for playing music
- Car battery voltage monitor
|
|
Make hands-free calls and play music directly through your car speakers via FM radio. |
|
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
|
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
|
P7888 NEW
|
|
|
|
World famous IP67 weatherproof pluggable connectors for automotive and industrial wiring. Supplied in a set including crimp pins, gasket, male and female connector bodies. DE-DT8-1. |
|
A4937 NEW
|
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Bluetooth audio streaming receiver in-built
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music. |
|
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
|
A4464 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
|
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
|
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
|
A4024 NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
|
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
|
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
|
A6541 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
|
D0863 NEW
|
|
- Long life LiFePO4 battery with up to 10 year service life
- Silent operation for use in any environment
- Auto restart when AC recovers without any interaction by the user
- High efficiency fan-less design reduces heat
- Wall/surface mountable brackets
- Optional external web/SNMP card for remote monitoring
- 5 year warranty with local support through PowerShield
|
|
Designed for Australian conditions the Ninja Slimline UPS features Lithium Iron-Phosphate (LiFePO4) battery technology to allow the UPS to operate continuously at up to 40 degrees celcius without reduction in battery life. At 42mm in height, the Ninja Slimline is the perfect UPS for compact spaces. |
|
P7462A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
|
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
|
T2488A NEW
|
|
- We recommend the use of high quality Iroda butane gas for use in all Iroda gas powered products. Inferior or lower grade butane may contain a higher level of impurities which will block the internal microscopic filters faster causing intermittent or complete failure.
|
|
A handy fliptop keyring blowtorch, ideal for those quick jobs on the go! Easy one hand operation with adjustable 1300 degree C flame, one click piezo ignition and easily refillable with butane gas. |
|
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
|
D4214 NEW
|
|
- 16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots
- High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*
- Working with IEEE 802.3af/at compliant PDs
- Plug and play, with no configuration and installation needed
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ℃)
|
|
Plug and Play, Multi-Purpose PoE Switch with Powerful Performance |
|
F1163 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 207mA
- Rated Power Consumption: 5.0W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ± 10% at rated voltage
- Air Flow: 108.2 CFM
- Static Pressure: 0.28 Inch-H2O
- Acoustic Noise: 44.5dB (A)
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B1-0000-A99) with thermoplastic frame. |
|
F1162 NEW
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles, brushless DC motor
- Bearing System: Precision ball bearing system
- Frame/Fan Blade Material: Thermoplastic PBT of UL 94V-0
- Rotation: Counter-clockwise (viewed from the front of the blade)
- Mounting Holes: 8 x 4.3mmØ
- Dimensions: 120 x 120 x 25mm
- Weight: 157g
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 146mA
- Rated Power Consumption: 3.5W
- Operating Voltage Range: 10 ~ 27.6V DC
- Starting Voltage: 10V DC (25°C power on/off)
- Operating Temperature Range: -10°C ~ +70°C
- Storage Temperature Range: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2700 RPM ± 10% at rated voltage
- Air Flow: 93 CFM
- Static Pressure: 0.22 Inch-H2O
- Insulation Class: UL Class 5
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: Applied 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 60% humidity, 90% CL
- Protections: Automatic Restart, Polarity Protection
|
|
A 24V DC 120mm Sunon Ball Bearing Cooling Fan (#EEC0252B2-0000-A99) with thermoplastic frame. |
|
S2691A NEW
|
|
|
|
Replacement key to suit S2690A battery isolator key switch. |
|
S2690A NEW
|
|
- Sturdy construction
- Great compatibility
- Safety protection
- Wide range of applications
|
|
This waterproof battery disconnect switch ins made up of 1 x battery switch, 1 x key and 1 x waterproof cover. |
|
MB8968C NEW
|
|
- MEPS efficiency level V
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC, 1 Amp switch mode plug pack. Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). |
|
RT4808A NEW
ROHS
|
|
|
|
High temperature rating (105°C ) for constant, reliable operation.
2K reel and tape pack.
Note: Sleeve colour may be black or green. |
|
K8615 NEW
|
|
- 7.9" 4K mono LCD
- Self-developed integral light source
- High performance mainboard
- Z-axis with dual linear rails
- 5" HD touch screen
- Air filtration system
- Multiple slicing software
- Supports Creality Cloud APP
- Supports OTA updates
- Compatible with HALOT-BOX Lychee and CHITUBOX
|
|
The large 7.9" 4k mono LCD screen with a resolution of 4320*2560, vividly prints out every detail. With an upgraded 172 x 102 x 160mm build volume, it has a 73% volume increase compared to the 6" LCD and supports both smaller or larger models. |
|
K8612 NEW
|
|
- 300°C high temp nozzle.
- 300 x 300 x 400mm build volume.
- HD monitor camera in-built.
- Wi-Fi, Bluetooth and Ethernet connectivity.
- Trapezoidal design for added stability on large volume prints.
- Wide compatability with a variety of filament including PLA, ABS, PVA, TPU, PA, PETG and wood.
- Full-metal dual gear direct extruder.
- CR Touch 16 point automatic levelling sensor or manual levelling as desired.
- LED light bar.
- Spring steel flexible magnetic build plate.
- Silent main board - no noisy stepper motors!
- Filament sensor.
- Pause/resume printing.
- Creality Cloud Printing with iOS/Android app support.
- Supplied mostly assembled to get you printing faster (assembles in under 30 mins).
|
|
The 7 module design of this high performance 3D printer enables assembly within 10 minutes. |
|
K8610 NEW
|
|
|
|
This high performance 3D printer with a more aesthetic, streamlined design, features a brand new nozzle made of brass that can stand up to +300°C printing temperature and is compatible with PLA, ABS, PVA, TPU, PA, PETG and wood. |
|
S8871C NEW
|
|
- Low blue light/flicker free
- AMD FreeSync technology
|
|
A perfect all around display with stunning images that stretch from edge to edge. Features a compact slim design that will look smart in any space. |