|
Description |
Downloads |
Specs |
Ordering |
|
|
A2275 NEW
|
|
- All wallplates assembled by Altronics are supplied with two facia clip on covers. These are designed to match your current decor. Simply clip on the desired cover after installation.
|
|
A combination of level control attenuator with 11 positions and 5 way audio source selector. |
|
N2019D NEW
|
|
- Suits lead acid type batteries
- Suits lithium chemistry batteries, including Li-NiCoMn & LiFePO4.
- Adjustable daytime start, night off mode
- Auto battery identification
- Intelligent PWM charging
- Temperature compensation
- USB 2A charger (4 ports)
- Overload, short circuit, reverse polarity, reverse discharge, over heat, under voltage protections
|
|
Suitable for permanent installations of lead acid, gel battery and lithium chemistry (including Li-NiCoMn & LiFePO4) solar panel systems. |
|
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
P8166 NEW
|
|
- 240V AC 10A outputs.
- 7 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- High surge protection.
- Overload protection.
- Power cord located at the rear for less interference.
- 19” rack ear mounting.
|
|
The neat solution to supplying mains power to your mounted equipment. |
|
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
|
T2127 NEW
|
|
- Precise four gears torque adjustments
- Equipped with 4 LEDs
- Separate switch button.
- Dual dynamic mode to meet your needs easily
- Efficient rotation
- Slim screwdriver design
- Type-C 2.0 charging port
- 6 screwdriver bits
- Anti-slip grip
|
|
This USB rechargeable electronic screwdriver features a fully adjustable torque drive for fast and accurate driving of precision screws such as those found in modern high tech devices. |
|
T1534B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Removable handles for compact storage
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. 6mm2 to 50mm2. Commonly used for making high current battery leads in solar installations. 387mm length. |
|
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
|
A4658 NEW
|
|
- Simple in-line connection
- Provides additional power for long cable runs
- Aluminium case
- 24V DC power input (power supply included)
- Australian designed and manufactured
|
|
Designed to provide external power injection to the new A 4660 Redback Paging Console. |
|
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
|
D2339A NEW
|
|
- Supports up to 1920 x 1080 @ 60Hz.
- Stylish brushed aluminium finish.
- Use with USB type A devices.
- Suitable for use with A-C adapter (sold separately) for connection to USB C devices.
- Plug and play, no external power required.
- Supported by most operating systems & devices.
|
|
This USB 3.0 to HDMI graphics adapter turns an available USB 3.0 port into an HDMI output. |
|
X2364D NEW
|
|
- Suitable for both commercial and domestic lighting
- Natural White colour
- Adjustable mounting bracket
- Ideal for 4WD, camper and caravans
- Stainless steel hardware
|
|
These 12V DC flood lights are an ideal addition to a 4WD, caravan, camper or worksite machinery. Fitted with stainless steel hardware and brackets to ensure a long life in harsh outdoor conditions. |
|
Q1302 NEW
|
|
|
|
This signal booster for the Q1300 wireless TPMS allows you to increase range by relaying the sensors from your caravan or other trailer back to the internal monitoring unit in the vehicle. Requires 12V DC power. Bare end connection provided. |
|
M8994A NEW
|
|
- Slimline and lightweight case design reduces the need to carry bulky chargers around.
- 112W power delivery 2.0 output for modern USB C type devices.
- Auxiliary USB type A charging output (2.4A max).
- Compatible with a wide range of brands and models which utilise USB C type charging.
- Wide AC input range (100-240V AC) allows overseas use when paired with standard travel adaptors.
- Includes power cable.
|
|
This slim & lightweight 112W USB-C power delivery (PD) charger offers fast recharging for MacBooks, Nintendo Switch and other type “C” devices. |
|
P6188 NEW
|
|
|
|
10m SpeakOn connector to SpeakOn connector audio lead. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
|
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
|
X6017 NEW
|
|
- Reads trouble codes on most vehicles
- Displays general and vehicle specific codes
- View vehicle information
- View real-time data streams
- An essential automotive diagnostic tool
|
|
Used to check engines of all vehicles that comply with OBD II, 12V voltage with standardized 16-Pin connector. This OBDII scanner tool provides a complete solution for reading vehicle data on OBDII equipped vehicles. |
|
H1241 NEW
|
|
|
|
Chrome Plated Brass. Tapped to suit metric M3 machine Screws
Pack of 100pcs. M3 x 20mm. |
|
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
|
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
|
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
|
K8671 NEW
|
|
- Build more than 72 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Enhance children's hand-on ability, DIY and logical thinking ability
- Different combinations of the motor and sensors greatly stimulate kids' to think scientifically.
- The control module of this educational toy also known as the "Intelligent Motor", contains 2 operation modes:"Electrical Mode" and "Intelligent Mode". The electric part makes it an excellent and amusing toy while the intelligent part is what specifically makes it SMART and DIFFERENT. (Batteries NOT included).
- Both the blocks and motor are compatible with almost all building sets. Spectacularly, with the great compatibility of the Intelligent Motor, it can power up motionless robots and make them move!
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- This set is packed in a storage box to help children develop a good habit of packing and collecting their own toys.
|
|
This 300pc set contains the parts for 72 different project designs which can be built using Makerzoids 3D app tutorials. |
|
R9523B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
|
DA0339B NEW
|
|
- Built for extreme conditions temperature proof, water proof, shock proof, and x-ray proof
- Delivers 4K Ultra HD and Full HD video recording and playback
- Meets the new UHS Speed Class 3 (U3) and UHS Video Speed Class 30 (V30) for 4K UHD
- Transfer faster with read speeds up to 130MB
- Rated A1, this SanDisk Extreme® microSD card is optimised for apps, delivering faster app launch and performance that provides a better smartphone experience
|
|
Get extreme speed and performance with the SanDisk Extreme microSDHC or microSDXC UHS-I Memory Card. The perfect companion for your smartphone, tablet, or camera, this memory card delivers Full HD video (1080p) recording and playback, and quicker data transfer. Includes SD adaptor. |