|
Description |
Downloads |
Specs |
Ordering |
|
 |
Z6490 NEW
|
|
|
|
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. |
 |
Z6491 NEW
|
|
- Wide Current Range: Supports motor loads ranging from 5A to 22A, ensuring flexibility for various DC motor applications.
- PWM Technology: Utilizes Pulse Width Modulation to efficiently regulate motor speed while minimizing energy loss and heat generation.
- MOSFET Control: Integrated high-efficiency MOSFETs for stable, reliable, and high-current output performance.
- Compact Design: Designed for easy integration into small projects and enclosures.
- Opto-isolated input.
|
|
The PWM MOSFET Motor Speed Controller is a high-performance module designed to provide precise control of DC motor speed using Pulse Width Modulation (PWM) technology. |
 |
Z6494 NEW
|
|
- Delivers up to 60W output with a 2-ohm load under a 24V power supply.
- Output power decreases proportionally for 4-ohm or 6-ohm loads.
- Supports a DC input range of 10-24V, ensuring flexibility for various power supply configurations.
- Designed in PBTL mode, enabling support for low resistance and high-power output
|
|
The TPA3118 60W Mono Digital Audio Power Amplifier Board is a high-performance audio amplifier designed for applications requiring compact size, low resistance, and high power output. |
 |
Z6497 NEW
|
|
- Integrated temperature and humidity sensing for precise control
- Wide temperature range from -20℃ to 60℃
- Full humidity control with a range of 0% to 100%
- High control accuracy of 0.1℃
- Relay output with a maximum capacity of 10A
- Compact and durable design with dimensions of 65*55*28mm
|
|
The XH-M452 Dual Output Temperature & Humidity Control Board is a versatile device designed for precision climate control applications. |
 |
J0080 NEW
|
|
- Working Temperature: 0℃ - 40 ℃
- Motor voltage: 12VDC
- Motor current: 200-300mA
- Flow Rate : >80ml/min
- Tube Size : 5mm tube
- Pump Head Material : ABS
- Pump Pipe : Transparent silicone pipe
- Pulsations : Three roller
|
|
This 12V Peristaltic Water Dosing Pump can be used in a variety of applications. |
 |
Z6492 NEW
|
|
- Model: STM32F103C8T6
- Core: ARM 32-bit Cortex-M3 CPU
- Operating Frequency: Up to 72 MHz
- Flash Memory: 64KB
- SRAM: 20KB
- Operating Voltage: 2.0V to 3.6V
- I/O Logic Voltage: 2.0V to 3.6V
- Reset Functionality: Supports Power-On Reset (POR) and Power-Down Reset (PDR)
- Crystal Oscillator: 4-16 MHz for precise clocking
- On-board Mini USB port for both power supply and USB communication
- Colour: Black
- Material: Metal
- Dimensions: 53 x 22mm
|
|
The STM32F103C8T6 ARM STM32 SWD Development Board is an ideal platform for learners and developers looking to explore and master the STM32 microcontroller based on the ARM Cortex-M3 32-bit core. |
 |
Z6564 NEW
|
|
- Operating frequency: 2400MHz ~ 2524MHz
- Modulation: GMSK
- Receiver sensitivity: -95dbm
- Operating voltage: 2.7V ~ 3.6V
- Max current consumption when transmitting data: 115mA
- Max current consumption when receiving data: 45mA
- Gain of PA: 20 dB
- Gain of LNA: 10 dB
- Supply Voltage: Standard
- Dissipation Module: Standard
- Operating Temperature: -40 to 85°C
|
|
Operating in the 2.4GHz frequency band, the nRF24L01+PA+LNA is a wireless transceiver module designed for long-range communication while maintaining low power consumption. |
 |
X3061 NEW
|
|
|
|
Barrel up rough terrain with this remote control dune buggy thats perfect for small kids and big kids! 1:43 scale. |
 |
Z6493 NEW
|
|
- The PCA9685 offers 16 fully programmable PWM outputs with a 12-bit resolution, providing 4096 steps for precise duty cycle adjustments on each channel.
- The module uses the I2C bus for communication, ensuring easy integration with microcontrollers like Arduino or Raspberry Pi.
- Supports frequency control across all 16 channels, programmable between 24Hz and 1526Hz.
- The duty cycle (pulse width) can be fine-tuned from 0% to 100% for accurate output control.
- The on-board PWM controller manages all 16 channels independently, reducing processing load on the microcontroller compared to direct pin-based servo control.
- Multiple modules can be daisy-chained together. With up to 62 boards on a single I2C bus, you can control up to 992 servos using just two pins.
|
|
This 16 Channel PWM Servo Control Board is a versatile module that allows you to control up to 16 servos using only 2 pins via I2C communication. |
 |
DS4192 NEW
|
|
- Port: 5 ports
- Data rate: 10/100Mbps
- Dimension: 95*42mm
- Chipset: Realtek 8305NB
- Power input: 5~17V
|
|
A compact 5 port ethernet switch board suitable for 10/100Mbps data transfer. Designed for OEMs building network capabilities into custom systems. Powered via 2.1mm DC jack input (5-17V DC). Compact board design measures just 95 x 42mm. |
 |
Z6316 NEW
|
|
- Easy to set up and pair - Android app available for direct control.
- Onboard Bluetooth status indicator and relay indicator.
- With 2 optocoupler isolation, strong anti-interference ability.
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module.
- Compact board design.
- Module with diode effusion protection short response time
|
|
A combined relay and control board with the ability to switch on and off connected loads using an App on your phone via Bluetooth. The eWeLink app offers seamless power switching using your device when in range of the relay board (typically 10m). |
 |
Z6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
- 12VDC module operation
|
|
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 12VDC and controls either AC or DC loads up to 10A max current. |
 |
ZA6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
- 24VDC module operation
|
|
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 24VDC and controls either AC or DC loads up to 10A max current. |
 |
J0064 NEW
|
|
- Gear Ratio: 90:1
- Input Voltage: 12V
- No Load
- Speed: 66RPM
- Current: 0.3A
- Rated Load
- Speed: 50RPM
- Current: 1A
- Torque: 17kg-cm
- Stall Load
- Current: 3.8A
- Torque: 35kg-cm
|
|
This gearbox is suitable for a host of model and light industrial applications |
 |
H8958A NEW
|
|
- Great for better heat dissipation on the Pi 5.
- Access to all Pi Ports: Power, Video, Audio, USB, LAN, MicroSD Card.
- Slots for camera cables and GPIO access.
- Compatible with the Raspberry Pi 5.
- Includes cooling fan with header connection.
- Integral heatsink for added cooling efficiency.
|
|
This compact multi-layer acrylic case suits the Raspberry Pi 5 and provides access to all ports on the board. Includes cooling fan module with heatsink. |
 |
Z6495 NEW
|
|
- Non-contact detection, moving object detecting.
- This module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.
- Provide various frequency range standards: -UK,-F.
- Advanced low consumption PHEMT oscillator.
- Independent transmitting and receiving route, can get the big gain.
- High sensibility, high flexibility, low cost, operating distance is 15m.
- Single channel operation
|
|
The CDM324 is a 24GHz Millimeter Wave Radar Sensor Module designed for reliable non-contact motion detectionand moving object detection. |
 |
ZB6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
|
COMING SOONThis item is arriving soon. |
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 110-220V AC and controls either AC loads up to 10A max current. |
 |
K8601 NEW
|
|
- Double sided PEI coated plate
- Excellent flatness & elasticity
- Strong adhesion
- Durable and long lasting textured plate
|
|
Double sided black textured PEI spring steel magnetic build plate to suit 3D printer models K8600 & K8602 |
 |
Z6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- SWD connector for debugging.
- HID support for keystrokes and mouse movement.
|
|
Introducing the Funduino UNO R4 Minima compatible Arduino board. Equipped with the RA4M1 microprocessor, this board offers enhanced processing power, expanded memory, and more, all while maintaining the reliable UNO form factor and practical 5V operating voltage. Get ready for a remarkable upgrade! |
 |
J0070A NEW
|
|
- Step Angle: 1.8Deg
- Temperature Rise: 80DegC max
- Ambient Temperature: -20DegC~+50DegC
- Insulation Resistance: 100 MOhm Min. ,500VDC
- Dielectric Strength: 500VAC for 1minute
- Shaft Radial Play: 0.02Max. (450g-load)
- Shaft Axial Play: 0.08Max. (450g-load)
- Max. radial force: 28N (20mm from the flange)
- Max. axial force: 10N
- Product description: 42 two-phase stepping motor Body length 34mm Static torque 2.2kg.cm
- 5mm shaft diameter with flat wire, length 24mm,
- Wiring method: black green A +, A-. Red blue B +, B-,
- Adapter driver JK0220 (driving voltage DC12V ~ 36V, AC12V ~ 24V, current range 0.3A ~ 2.0A)
|
|
12V 200-step 1.8° 48BYG stepper motor with interface
lead. 2 phase type. 0.23Nm holding torque. 5mmØ
shaft. NEMA17 M3 mounting hole pattern (31mm).
Size: 42x42x34 (25mm shaft). 1m lead. |
 |
A0724 NEW
|
|
- Operating voltage: 12 V/DC (11 - 14 V)
- Power consumption: approx. 2 mA/35 mA (relay off/on)
- Relay contact: 1 x SWITCH OVER, loading capacity max. 25 V, 3 A
- Operating temperature range: approx. -15 to +50°C
- Luminous intensity switching-on: approx. 25 lux ±20%
- Luminous intensity switching-off: approx. 45 lux ±20%
- Switching delay: approx. 3 - 4 seconds
- Dimensions: approx. 72 x 50 x 32mm (without fastening straps, with sensor)
|
|
Kemo M122 switch allows users to switch lamps or other electric devices on or off at dusk or daybreak. The sensitivity of the luminous intensity may be changed by partially covering the sensor mechanically. |
 |
H8960A NEW
|
|
- Great for better heat dissipation on the Pi 5.
- Access to all Pi Ports: Power, Video, Audio, USB, LAN, MicroSD Card.
- Compatible with the Raspberry Pi 5.
- Includes cooling fan with header connection.
- Includes 3 heatsinks.
|
|
An all metal Raspberry Pi 5 case with internal cooling fan and heatsinks. |
 |
Z6433 NEW
|
|
- XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
- 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
- Bluetooth, LE: Bluetooth 5, Bluetooth mesh
- 16 MByte(64Mbit) SPI Flash
- 384 KByte ROM
- 512 KByte SRAM
- 8 MByte(64Mbit) SPI PSRAM
- 16 KB SRAM in RTC
- Communication Interfaces: 2 x I2C, 2 x I2S, 4 x SPI, 3 x UART, 1 x USB OTG
- Security: 4096 bit OTP, AES, SHA, RSA, ECC and RNG, Secure boot, Flash encryption, Digital signature, HMAC module
- Dual Type-C USB connectors
- Reset and User/Firmware buttons
- RGB WS2812 User LED
- Power LED
- Virtual USB port provided by CP2102 for debugging and firmware upgrade
- Compact size of 50.1 x 13mm
- Supply Voltage: 5V via USB
- Circuit Voltage: 3.0 to 3.6V Circuit Operation
|
|
The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM(ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. |
 |
Z6527A NEW
|
|
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- On Board level conversion chip for 5V/3.3V MCU
- Compatible with 2.8~3.3V operation voltage level
- Compatible with Arduino-Series development Board.
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
|
|
A 480x320 display shield for the Arduino Mega utilising the ILI9486 chipset. Ideal for projects requiring sensor monitoring. |
 |
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
