|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1050A NEW
|
|
- Contact Rating: 5A @ 125V AC, 3A @ 250V AC
- Contact Rating: 50mΩ max
- Insulation Rating: 500V DC 1000MΩ min
- Dielectric Strength: 1 minute 1500V AC
- Operating Temperature: -25°C to 85°C
- Mounting Hole Diameter: 12.2mm
|
|
DPDT 3A Toggle Switch. With On-Off plate and metal actuator. |
 |
S2072 NEW
|
|
|
|
A DPDT slide switch with 90 degree pins for PCB mounting. Vertical action. |
 |
SA4191B NEW
|
|
|
|
A DPDT 8A DIN Rail Mount Relay Cradle Base to suit SA4190B and SA4195B relays. |
 |
SA4191 NEW
|
|
|
|
A SPST 5A DIN Rail Mount Relay Cradle Base to suit SA4190 and SA4195 relays. |
 |
SS0825 NEW
|
|
|
|
Spare Keys to suit the 2 Position Heavy Duty Keyswitch (S 0825) |
 |
SW1042 NEW
|
|
- Rating: 30A 12V DC, 20A 125V AC, 15A 250V AC
- Panel Cut-Out Size: 12mm
- Waterpoof Degree: IP67
- Function: ON-OFF SPST (Alternate)
- Terminal: 6mm spade
- Contact Resistance: ≤25mΩ
- Insulated Resistance: 100 mΩ min.at 500VDC
- Operating Temperature: -25°C to +85°C
- Electrical Life: ≥50,000 Cycles
|
|
This 30A 12V DC / 15A 250V AC toggle switch offers IP67 water and dust protection for industrial applications. |
 |
SW1047 NEW
|
|
- Rating: 30A 12V DC, 20A 125V AC, 15A 250V AC
- Panel Cut-Out Size: 12mm
- Waterpoof Degree: IP67
- Function: ON-OFF DPST (Alternate)
- Terminal: 6mm spade
- Contact Resistance: ≤25mΩ
- Insulated Resistance: 100 mΩ min.at 500VDC
- Operating Temperature: -25°C to +85°C
- Electrical Life: ≥50,000 Cycles
|
|
This 30A 12V DC / 15A 250V AC toggle switch offers IP67 water and dust protection for industrial applications. DPST |
 |
SA4195B NEW
|
|
- Resistive Load: 8A/250V AC, 30V DC
- Resistive switching power: 2000VA, 240W
- Electrical Life: ≥100,000 cycles
- Initial contact resistance: ≤50mΩ
- Insulation resistance: ≤100mΩ (500V DC)
- Coil power: DC: About 0.53W. AC: About 0.9VA
- Contact release time: AC: ≤20ms. DC: ≤10ms. Diode: ≤20ms
- Operating temperature: -40°C to 70°C
- Impact resistance: Stability 98m/S². Strength 980m/S²
- Installation: Plug-in Installation
- Weight: ~20g
- Power frequency withstand voltage:
- Between contacts of the same pole: 1,500V AC, 1min
- Between contacts of the opposite pole: 3,000V AC, 1min
- Between contact and coil: 3,000V AC, 1min
- Materials:
- Contact: SIlver Alloy
- Body: PC
- Base: PBT
|
|
Control two circuits at once with this easy-install DPDT cradle relay. |
 |
SA4190B NEW
|
|
- Resistive Load: 8A/250V AC, 30V DC
- Resistive switching power: 2000VA, 240W
- Electrical Life: ≥100,000 cycles
- Initial contact resistance: ≤50mΩ
- Insulation resistance: ≤100mΩ (500V DC)
- Coil power: DC: About 0.53W. AC: About 0.9VA
- Contact release time: AC: ≤20ms. DC: ≤10ms. Diode: ≤20ms
- Operating temperature: -40°C to 70°C
- Impact resistance: Stability 98m/S². Strength 980m/S²
- Installation: Plug-in Installation
- Weight: ~20g
- Power frequency withstand voltage:
- Between contacts of the same pole: 1,500V AC, 1min
- Between contacts of the opposite pole: 3,000V AC, 1min
- Between contact and coil: 3,000V AC, 1min
- Materials:
- Contact: SIlver Alloy
- Body: PC
- Base: PBT
|
|
This 5A 12VDC DPDT Cradle Relay is designed for quick and easy installation with its cradle-style base, often mounted on a DIN rail. |
 |
SA4190 NEW
|
|
- Resistive Load: 12A/250V AC, 300V DC
- Resistive switching power: 3000VA, 360W
- Electrical Life: ≥100,000 cycles
- Initial contact resistance: ≤50mΩ
- Insulation resistance: ≤100mΩ (500V DC)
- Coil power: DC: About 0.53W. AC: About 0.9VA
- Contact release time: AC: ≤20ms. DC: ≤10ms. Diode: ≤20ms
- Operating temperature: -40°C to 70°C
- Impact resistance: Stability 98m/S². Strength 980m/S²
- Installation: Plug-in Installation
- Weight: ~20g
- Power frequency withstand voltage:
- Between contacts of the same pole: 1,500V AC, 1min
- Between contacts of the opposite pole: 3,000V AC, 1min
- Between contact and coil: 3,000V AC, 1min
- Materials:
- Contact: SIlver Alloy
- Body: PC
- Base: PBT
|
|
This 5A 12VDC SPST Cradle Relay acts like a simple on-off switch for a single electrical circuit, making it useful in applications like automotive electrical systems. |
 |
SA4195 NEW
|
|
- Resistive Load: 12A/250V AC, 300V DC
- Resistive switching power: 3000VA, 360W
- Electrical Life: ≥100,000 cycles
- Initial contact resistance: ≤50mΩ
- Insulation resistance: ≤100mΩ (500V DC)
- Coil power: DC: About 0.53W. AC: About 0.9VA
- Contact release time: AC: ≤20ms. DC: ≤10ms. Diode: ≤20ms
- Operating temperature: -40°C to 70°C
- Impact resistance: Stability 98m/S². Strength 980m/S²
- Installation: Plug-in Installation
- Weight: ~20g
- Power frequency withstand voltage:
- Between contacts of the same pole: 1,500V AC, 1min
- Between contacts of the opposite pole: 3,000V AC, 1min
- Between contact and coil: 3,000V AC, 1min
- Materials:
- Contact: SIlver Alloy
- Body: PC
- Base: PBT
|
|
This 5A 24VDC SPST Cradle Relay acts like a simple on-off switch for a single electrical circuit, making it useful in applications like automotive electrical systems. |
 |
S4163 NEW
|
|
- Nominal voltage: 250V AC
- Nominal current: 6A
- Cradle input voltage: 6-24V AC/DC
- Nominal coil voltage: 12V DC
- Pick-up voltage (max): 9V DC
- Drop-out voltage (min): 0.6V DC
- Max voltage: 18V DC
- Coil resistance: 848Ω. (+/- 15%)
- Max switching power AC: 1500VA
- Max switching power DC: 180W
- Contact material: Silver alloy
- Max coil power: 170mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 4000V AC between coil & contact
- Life: 60,000 electrical, 10 million mechanical
|
|
A super slimline DIN rail mount relay designed for industrial switching applications. Suits standard 35mm DIN rail. Supplied with 12V DC coil relay.
|
 |
S0825 NEW
|
|
- Key mechanism provides security preventing unauthorized use
- 2-position maintained action – ON/OFF control
- 1NO + 1NC Contact configuration
- Switch is built with rugged, industrial-grade materials to withstand harsh environments and continuous operation.
|
|
A secure heavy duty key-operated switch for industrial control. Features 1NO1NC contacts to safely manage two circuits at once. |
 |
S0826 NEW
|
|
- General:
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles, ≥500,000 cycles
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Operating requirement: 90°C rotation requires rotation in place
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
|
|
|
 |
S0827 NEW
|
|
- General:
- Button Colour: Red
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles (momentary), ≥500,000 cycles (latching)
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Operating force: ~10N
- Operating travel: ~5mm
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
|
|
Heavy Duty Red 22mm Momentary Push Button Switch activates only while pressed and returns to its original position when released. |
 |
S0828 NEW
|
|
- General:
- Button Colour: Green
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles (momentary), ≥500,000 cycles (latching)
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Operating force: ~10N
- Operating travel: ~5mm
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
|
|
Heavy Duty Green 22mm Momentary Push Button Switch activates only while pressed and returns to its original position when released. |
 |
S0830 NEW
|
|
|
|
Enclosure to suit the range of Heavy Duty 22mm switches; S0824, S0825, S0826, S0827, S0828. |
 |
S0824 NEW
|
|
- General:
- Switch type: DPDT
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles (momentary), ≥500,000 cycles (latching)
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Operating force: ~10N (1NO 1NC) about 17N (2NO 2NC)
- Operating travel: ~5mm
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
-
|
|
Ensure safety and control with this DPDT Emergency Stop Switch—push to lock in emergencies, twist to reset when safe. A reliable solution for industrial and machinery applications. |
 |
S4345 NEW
|
|
- Max DC switching: 75V @ 100A / 1400W
- Contact material: Silver alloy
- Coil resistance: 60Ω
- Max coil power: 2.4W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for high current DC automotive applications. Not suitable for AC use. M6 bolt for contact load connection. 6.3mm spade terminals for contact coil connection. |
 |
S4425 NEW
|
|
- Flashing frequency: 85 times/minute +/-10%
- DC Voltage: 11.0 V
- Item connection: Spade Terminals
- Dimensions: 30L x 30W x 40Hmm
- Device Type: Flasher Relay, Cradle Mounting Relay
- DC Contact Voltage: 11.0V, 15.0V
- DC Switching Current (Opening): 10.0A
- Nominal Voltage: 12.0 V
- Input: DC
|
|
This unit is specially designed to work with low-current LED indicator lights, preventing the common “hyper flash” issue that happens with standard flasher relays. |
 |
S4426 NEW
|
|
- Flashing frequency: 85 times/minute +/-10%
- Current Draw: 0.02 A
- Required Voltage: 11.0V, 15.0V
- Dimensions: 30L x 30W x 40Hmm
|
|
This unit is specially designed to work with low-current LED indicator lights, preventing the common “hyper flash” issue that happens with standard flasher relays. |
 |
SW3244 NEW
|
|
- Contact Rating: 16A @ 250V AC
- Neon: Red, 250V AC
- Panel Thickness: 3mm max.
- Electrical Life: >10,000 cycles
- Mechanical Life: >30,000 cycles
- Contact Resistance: <20mΩ max.
- Insulation Resistance: >1000MΩ
- Dielectric Strength: >1500V AC
|
|
An IP65 rated weatherproof alternate rocker switch fitted to an inline enclosure with weatherproof cable glands. |
 |
S0831 NEW
|
|
|
|
This Enclosure has been designed to suit the range of Heavy Duty 22mm switches; S0824, S0825, S0826, S0827, S0828. Please see accessories below. The enclosure allows two switches to be fitted. |
 |
S0958 NEW
|
|
- Switch type: Screw terminal SPST
- Contact rating: 2A @ 36V DC
- Operation type: Momentary
- Contact resistance: <50mΩ
- Insulation resistance: >1000MΩ
- Dielectric strength: 1500V, RMS 50Hz, 1 min
- Operating temperature: -25°C to 55°C
- Operating force: About 3N.
- Operating travel: About 2.5mm.
- Outer construction: Stainless steel
- LED: 12V dc
- Rating: IP65
- Panel Thickness: 1-8mm
- Cutout diameter: 19mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary action. Red/Blue LED ring. |
 |
SS5881 NEW
|
|
- Max. Voltage: 32V DC
- Rating: 10A DC
- Interrupt Rating: 3000A @ 32V DC (as per SAE & ABYC E-11)
- IP Rating: IP66
- Operating Temperature: -40°C to 85°C
- Testing: SAE J553, ABYC E-11 & SAE J1171
- Material: UL94V-0
- External Dimensions: 55H x 37W x 33mm
|
|
This 10A high current panel mount circuit breaker is ideal for use in 12V or 24V DC power systems. It's compact profile design takes up minimal space on your switch panel and can be easily reset using the lever switch. It features a IP66 weatherproof casing with M6 terminal bolts. |