« Prev

S9359 • 5.8Ghz Wireless AV Sender & IR Repeater


Cat. Page 13


SAVE $44.00
  • WAS $119.00
  • $75.00
  • Price per each
  • Includes GST


    Northbridge Less than 5pcs
    Balcatta Less than 5pcs
    Cannington Less than 5pcs
    Midland Less than 5pcs
    Myaree Less than 5pcs
    Auburn In Stock
    Springvale In Stock
    Airport West Less than 5pcs
    Brisbane In Stock
    Adelaide Less than 5pcs
    Warehouse In Stock

Last updated 1-07-19 12:20:32

This product has been viewed 1034 times.

  • Popular
  • Overview
  • Specifications
  • Downloads


Designed for transmitting composite video and stereo audio to a second television. For example a VCR or DVD could be transmitted from your main viewing area to a bedroom or games room up to 30m away. The IR repeater also enables the VCR or DVD remote control to be used in the second room.


  • Selectable 7 channel 5.8GHz
  • Transmits crisp AV signal
  • Remote control the AV source with built in IR repeater
  • Wide band IR receiver suitable for use with RC6 code equipment (eg. Foxtel® Foxtel IQ®)
  • Compatible with CCD/CMOS cameras
  • Supplied with RCA AV cable and IR “eye” lead
  • Plugpacks included

Simultaneous viewing of video programs on a 2nd TV/monitor without wires.
Wireless transmission of Hi-Fi stereo to any active speaker.
Remote monitoring of live video from a camcorder or CCD camera.
Local area broadcasting of audio/video programs for multiple viewers even in different rooms


  • Frequency Range: 5725 ~ 5875MHz
  • Channel Selection: PLL Synthesizer 7CH
  • Video/Audio Mod/Demod. Type.: FM-FM
  • Video Polarity: Negative
  • Supply Voltage: DC +9V
  • DC IN Jack: 3.5mm
  • Power On LED Indicator: Red
  • Channel Selector: 2 Slide switches
  • IR Remote Extender: Built-In
  • Operating Frequency: 433.92MHz
  • Antenna Type.: Patch Antenna
  • Mod./ Demod. Type.: ASK
  • Transmitter Spec
  • Supply Current: 140mA ±10mA(CE,FCC) / 340mA ±10mA(High power)
  • Input Port: 3.5mm AV Phone Jack
  • Output Power: 13dBm ± 1dB ( CE ) / 0dBm ± 1dB ( FCC ) 20dBm ± 2dB (High power)
  • IR Extender Receiver
  • Receiving Sensitivity: -95dBm,min
  • IR Carrier Frequency: 32 ~ 57KHz
  • IR LED Operation Range: 4~5 Meters
  • External IR LED Port: 2.5mm Mono Phone Jack
  • Receiver Spec
  • Supply Current: 230mA ±20mA
  • Output Port: 3.5mm AV Phone Jack
  • Input Sensitivity: -85dBm, Typ. ( @ Video S/N Ratio≧19dB)
  • Video Output: 1VP-P , typ. (±0.2V)
  • Video Frequency Response (+/-5 dB): 50Hz~5.5MHz
  • Video S/N Ratio (100KHz, 1VP-P Sine Wave): 40dB,min
  • Audio Output Signal Level (1KHz Sine Wave): 2VP-P, typ. (±0.3Volt)
  • Audio Output Frequency Range (±6dB): 50Hz ~ 20KHz
  • Audio S/N Ratio (1KHz @ 2VP-P): 50dB, typ. (±3dB)
  • IR Extender Transmitter
  • RF Output Power: 8dBm ±2dB (CE) ; 0dBm ±2dB (FCC)
  • IR Receiver module carrier freq.: 32 ~ 57KHz
  • IR Sensor Operation Range: 7.5 Meters, min
  • IR Sensor Half Angle: ± 45∘Horizontal

*Specifications are subject to change without notice.

Thank you ! We have received your message.
Thank you ! We have received your message.

  • Can you send audio only without a video signal?
    Barry Dawson

    Yes it will, It doesn't require a video input to transmit audio. It will transmit what is at the input.