|
Description |
Downloads |
Specs |
Ordering |
|
|
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
|
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
|
M8181 |
|
- Input: 230V AC 50Hz.
- Output: 110V AC 75W.
- Cable: 1.8m.
- Continuous usage must be below 65VA on M8181
|
|
Converts 220V-240V to 110V for using US appliances on Australian mains voltages. Fitted with US mains socket. |
|
D2326 |
|
- QI Standard
- Inbuilt over-voltage, under-voltage and short circuit protection
|
|
This QI Wireless 10W USB Phone Fast Charging Pad allows you to charge your phone wirelessly and more conveniently as you simply place your Qi - enabled smartphones) on the wireless charging pad. |
|
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
|
M8169 |
|
- High efficiency: 95.5%
- Input reversing polarity protection
- Input transient absorption protection
- Support -40°C environment
- 100% full load burn in test
- IP65 rating
- Over current, over temperature and short circuit protection
- Non-isolated module
|
|
This converter provides a regulated 12V d.c. output at a maximum of 30A from a typical 24V battery. Dimensions: 110x70x23mm |
|
P8406 |
|
- Fitted with IEC C5 cloverleaf connector and standard Australian 3 pin mains plug with earthing pin.
- 1.8 metre length.
- 3 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
Black Cloverleaf to 3 Pin plug 1.8m. Energy Authority approved.
2.5A 2m |
|
A0346 |
|
- Kit includes 1 RF remote + 1 outlets
- RF Remote control means line-of-sight is not necessary
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby 240V power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
|
D0875
|
|
- Built in replaceable Li-ion battery
- Auto start when plugged in
- Embedded Micro-controller
- Manual power off switch port
- Overload, short-circuit, over-charge & over-discharge protection
- NBN molex connector
|
|
This compact plugpack style NBN UPS is fitted with an internal lithium-ion battery pack for keeping devices powered up during a power outage. Appliances may then be shutdown safely, protecting from data loss, corruption or damage. 12V DC output with 8 DC jack tips to suit a wide range of appliances. Ideal size for small phone systems, POS, tills, r |
|
D0876
|
|
- Includes 4 x Li-Ion batteries
- Auto-start when plugged in
- Microprocessor control
- Multicolour LED indicator and manual Power Off Switch
- Overload, short circuit, over charge and over discharge protection
- Long backup time
- Additional terminal output for hardwired DC connection
- 2.1mm DC input jack
|
|
The Powershield DC - Mini 36 UPS is an ideal back up solution for routers, modems, security cameras, wifi extenders and VOIP phones. |
|
D2322 |
|
- 10W charging coil
- Near flush mount design provides a neat and tidy finish.
- Overall diameter 80mm
- 60mm mounting hole size
- Includes 2 metre USB cable and mains power adaptor
|
|
This ultra-slim desk mount 10W wireless charging pad offers convenient device charging for your workspace. It fits into a 60mm diameter desk hole and provides cable free charging for your phone while you work. Includes power adaptor and USB cable - nothing more to buy! |
|
S4528 |
|
- General
- Dimensions: 79L x 56W x 107H mm (including tabs)
- Weight: 1.1kg
- Charging
- 20 Hour Rate (10.5V): 2.9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 34MΩ
- Max Discharge Current: 43.5A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 0.87A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 2.9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
M8213 |
|
- 1 to 30V @ 20A output
- Adjustable current limiting
- Regulated variable output voltage or fixed via 3 presets
- Auxiliary fixed output, max 5A
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
A 1-30V, 20A adjustable current limiting power supply. Both voltage and current settings may be set in fine or coarse modes allowing precise adjustments. Includes three programmable preset outputs. Remote control of settings is also possible. Fixed 5A aux |
|
M8990A |
|
|
|
A laptop power supply designed for 100V-240V mains
use. Includes mains lead and 10 tips to suit popular
models of laptop. These include HP/Compaq, Sony,
Dell, Toshiba, IBM, Lenovo, Samsung, Fujitsu and
Acer. Voltage output is set automatically when different
tips are plugged in. Size: 133 x 30 x 58mm.
Energy authority approved. Voltages avail |
|
P8410C |
|
- Fitted with IEC C13 connector and standard Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
IEC Female to 3 Pin 2m. Energy authority approved |
|
M8310 |
|
- Up to 20A output
- 0-30V adjustable
- High efficiency switchmode design
- Over temperature, voltage and overload protection
- Low ripple & noise
- High RFI stability
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. Offers the flexibility of both wide adjustable voltage and current range. Size: 336W x 87H x 214Dmm. Weight: 2.9kg. |
|
S4491 |
|
- Capacity
- 20 Hour Rate (5.25V): 4.5Ah
- 10 Hour Rate (5.25V): 4.2Ah
- 1 Hour Rate (4.8V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 25MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
- General
- Dimensions: 70L x 47W x 107H mm (including tabs)
- Weight: 0.75kg
|
|
This 6V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
|
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
|
D0511B
|
|
- Ultra high capacity power bank with Power Delivery and Quick Charge™ function.
- Charge latest tablets, smartphones, portable game consoles and more.
- USB-C Power Delivery will deliver power delivery support at 18W to compatible devices.
- Dual Quick Charge™ 3.0 outputs will charge compatible smartphones and tablets 4 times faster.
- High speed Micro USB (QC2.0) and USB-C (Power Delivery) inputs for recharging.
|
|
Offering both the latest QuickCharge 3.0 charging and 18W USB-C PD output, this enormous 20,000mAh power bank will keep your devices charged away from mains power. 136x70x25mm |
|
D2323 |
|
- Two USB QuickCharge 3.0 charging ports.
- USB type C Power Delivery charging port.
- Can charge a phone, tablet and laptop simultaneously.
- Suits standard 60mm desk cabling hole.
- Protective sliding dust cover.
- Near flush mount finish.
|
|
This USB power delivery charger allows you to build fast convenient device charging into your desk and is capable of charging a phone, laptop and tablet simultaneously thanks to a generous 96W power supply (included). |
|
P8404C |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- 1.8 metre length.
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
2.5A 2 Pin to Figure 8 plug 1.8m. Energy Authority approved. |
|
S4550 |
|
- General
- Dimensions: 181L x 76W x 167H mm (including tabs)
- Weight: 5.4kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 18Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤16mΩ
- Max. Discharge Current: 180A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M5/F13
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 5.4A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 18Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
P8154 |
|
- High surge protection
- Recessed On/Off Switch
- Wide spaced socket to allow for plug packs
- 10A Circuit Breaker
- 2 x USB Sockets
- 5 x Surge-protected sockets supply complete, 3 line AC protection
- Impact and scratch resistant Polycarbonate case
- Heavy-duty 1.2-meter power cord
- Wall mountable
- LED indicator shows that your wiring is properly earthed and protection is active and available
|
|
This powerboard will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. |
|
M9381 |
|
|
|
24VAC @ 1.87A
Unit has bare ends (no tip fitted)
MEPS Approved. |
|
M8609 |
|
|
|
Replacement fridge connection cable for vehicles to suit Engel brand fridges. |