|
Description |
Downloads |
Specs |
Ordering |
|
 |
N0706A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
N2016 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Suitable for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
 |
S4550 |
|
- General
- Dimensions: 181L x 76W x 167H mm (including tabs)
- Weight: 5.4kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 18Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤16mΩ
- Max. Discharge Current: 180A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M5/F13
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 5.4A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 18Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8647 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 5m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
S4552 |
|
- General
- Dimensions: 181L x 77W x 167H mm (including tabs)
- Weight: 5.9kg
- Capacity
- 20 Hour Rate (10.5V): 20Ah
- 10 Hour Rate (10.5V): 18.7Ah
- 1 Hour Rate (9.6V): 13Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- Charging
- Internal Resistance: Approximately 14MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 6A
- Maximum Discharging Current: 300A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 20Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
M8054 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 600W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
 |
N0040F |
|
- Maximum power: 40W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.50A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 2.33A
- Maximum power voltage: 17.2V
- Connection: MC-4 Plug (1m lead)
- Dimensions: 664 x 408 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 40W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
N0065F |
|
- Maximum power: 65W
- Nominal voltage: 12V
- Short circuit current (ISC): 3.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 3.72A
- Maximum power voltage: 17.5V
- Connection: MC-4 Plug
- Dimensions: 664 x 664 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This 65 Watt model is an excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RVs, caravans, boats etc. |
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
SG4554 |
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
S4554 |
|
- General
- Dimensions: 165L x 175W x 125H mm (including tabs)
- Weight: 8.3kg
- Capacity
- 20 Hour Rate (10.5V): 26Ah
- 10 Hour Rate (10.5V): 24.1Ah
- 1 Hour Rate (9.6V): 16.4Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 15MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 7.8A
- Maximum Discharging Current: 390A (5 sec.)
- Designed Floating Life: 5 years.
|
|
his 12V 26Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8561A NEW
|
|
- 88% efficient switchmode power supply design.
- Protections: overload / over voltage / short circuit / under voltage / reverse polarity.
- 5A max connected load. 650mA battery charging circuit.
- LEDs provide quick status indication.
- Fits a standard size 7.2Ah 12V SLA battery.
- Patented design with simple wall mount installation.
- 100% full load burn-in tested.
- 2 year warranty.
|
|
A complete 12V DC power supply and UPS battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). |
 |
N0080F |
|
- Maximum power: 80W
- Nominal voltage: 12V
- Short circuit current (ISC): 4.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 4.55A
- Maximum power voltage: 17.6V
- Connection: 1m Dual MC-4 Plug Lead
- Dimensions: 760 x 664 x 25 mm
- Operating temperature: -40° to +85°C
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
 |
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
N0065G |
|
- Maximum power: 65W
- Nominal voltage: 12V
- Short circuit current (ISC): 3.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 3.72A
- Maximum power voltage: 17.5V
- Connection: MC-4 Plug
- Dimensions: 664 x 664 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This 65 Watt model is an excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RVs, caravans, boats etc. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
SG4560 |
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
M8060 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
Powerhouse