|
Description |
Downloads |
Specs |
Ordering |
|
 |
C8882B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
 |
C8881B |
|
- Operating frequencies 520 / 524.30MHz
- 19” 1RU rack mount case
- Steel enclosure construction
- Removable aerials
- Individual 3 pin XLR outputs
- Mixed 6.35mm jack output (1m cable included)
- Front panel level controls
- Tone squelch circuit for noise reduction
- RF, AF & peak signal LEDs
- Range up to 50m in ideal conditions
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19" rack mount cabinet is fitted with two fixed frequency wireless receivers. The miniaturised SMD construction and unique shielding technique, pl |
 |
A4566 |
|
 Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A simple in-line connection box fitted with a line monitoring capacitor. Since many 100V speakers do not have 22μF capacitors fitted, this box allows you to easily add it into the circuit for connection to a line monitoring system. |
 |
A5131 |
|
- 4 balanced microphone / 3 line inputs
- 3 modes of priority Cascade, FIBD, None
- VOX or PTT muting
- VOX muting or both mic and line inputs
- Channel active indicators
- Stylish half width 1RU chassis
- 24V DC operation
- Separate volume for each input
- Adjustable VOX sensitivity for each input
- 24V DC plugpack included
- Includes Power Supply
|
|
This four channel mixer features 4 balanced mic inputs and 3 line inputs. Input 1 is a dedicated balanced mic input whilst inputs 2 - 4 can accept either balanced mic or line level. |
 |
A1745 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
Connects to any RCA input to provide intervalled messages and background music. The included 8GB SD card can be loaded with your choice of background music and custom messages or promotions. Message intervals can be adjusted between 30 seconds and 7.5 minutes. |
 |
A4209 |
|
|
|
Pack of 5 indicator labels to inform patrons that there is a hearing aid induction loop installed. 140H x 100W mm |
 |
S5416 |
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A dual cover wallplate fitted with an S 6114 90dB pulsating siren and an S 4030 24V DC red indicator lamp. Designed to provide a visual and audible alert when 24V DC power is applied (such as from A 4471 power fail monitor). |
 |
A4903A |
|
- Screw terminals for 100V input
- Microphone or line level balanced outputs (3 pin XLR)
- Line level unbalanced output (2 x RCA)
- Recessed volume control to prevent tampering
- Requires no power
- Minimal loading or signal loss
- Dimensions 133W x 45H x 55D mm.
|
|
This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier. |
 |
A4173 |
|
- Rugged heavy duty construction
- 19” rack mount
- Bridgeable, parallel or two channel stereo operation
- Earth lift switch
- 3 pin XLR and 6.35mm inputs.
- Short circuit protection with indicator
- Overload protection with indicator
- Clipping prevention circuitry with indicator
- Variable speed fan forced cooling
- Muting circuit for switch on/off
|
|
This range is designed to function as a stereo or high power single channel amplifier for use in foreground sound reinforcement ie: pubs, clubs, cinemas and multi-function venues. |
 |
A4159 |
|
- Output Power (Stereo 8Ω): 350W + 350W
- TA 1KHz THD≤1% (4Ω): 500W + 500W
- Bridge 8Ω: 1000W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <440W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 9.5kg
- Gross Weight: 11.5kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
A4155 |
|
- Output Power (Stereo 8Ω): 150W + 150W
- TA 1KHz THD≤1% (4Ω): 220W + 220W
- Bridge 8Ω: 440W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <440W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 8.5kg
- Gross Weight: 10.5kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
C8818 |
|
|
|
A replacement lapel microphone for C 8810 tour guide transmitter. |
 |
C8816 |
|
|
|
A replacement earphone for C 8812 tour guide receiver. |
 |
C8813 |
|
|
|
A dual charging dock suitable for use with both the C 8810 and C 8812 tour guide system units. |
 |
C8812 |
|
- Automatic channel synchronisation between guide and visitors.
- Includes earphone with rubberised clip for universal fitment.
- Offers up to 15 hours of operation from a single AA battery.
- 50m transmission range - ideal for larger groups.
- 60 channels in the 520-544MHz frequency range.
- Fitted with belt/pocket clip.
- Clear and noise free reception.
- Charging stations available.
|
|
A durable lightweight receiver & earphone combination designed for use with the C 8810 tour guide transmitter. |
 |
C8810 |
|
- Automatic channel synchronisation between guide and visitors.
- Includes high performance lapel microphone with tie clip.
- 50m transmission range - ideal for larger groups.
- 60 channels in the 520-544MHz frequency range.
- Fitted with belt/pocket clip.
- Clear and noise free reception.
- Charging stations available.
|
|
A durable lightweight transmitter & lapel mic combination designed for use with the C 8812 tour guide receiver. |
 |
A2524 |
|
|
|
Balanced 10kΩ to 10kΩ balanced 3 pin male XLR with earth lift switch. |
 |
A2522 |
|
|
|
Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. |
 |
A2519 |
|
|
|
Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. |
 |
A4157 |
|
- Output Power (Stereo 8Ω): 250W + 250W
- TA 1KHz THD≤1% (4Ω): 370W + 370W
- Bridge 8Ω: 740W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <740W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 9kg
- Gross Weight: 10kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
C8892D |
|
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). |
 |
C8893D |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D). |
 |
C8890D |
|
- 700 Channels in 520-550MHz UHF Band
- LCD screen shows channel, frequency, RF/AF signal strength
- 1RU half rack metal desk mount case
- True diversity
- Tone squelch circuit
- Range over 100m in ideal conditions
- 6.35mm line output
- 3 pin balanced XLR mic output
- Up to 12 systems can operate side-by-side on different channels.
|
|
The Redback 700 channel UHF 520-550MHz radio microphone system is a professional system incorporating true diversity reception. This ensures a consistent and clear microphone signal with minimal dropout and noise interference. |
 |
CB0448 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
A2246 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
