| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
Black Nylon Washer Pk 12H5400 ROHS |
| Nylon washer black suit M6 Pack Qty: 12 | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
Globe For H5194A2501 ROHS |
| Spare globe to suit the A 2499 and A 2500 gooseneck lights. 12VDC 5W | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
Natural Nylon Washer Pk 12H5398 |
| Nylon washer clear suit M6 Pack Qty: 12 | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
M6 Silver Pan Pozi Rack Bolt Pk 12H5385A |
| M6 x 16mm zinc plated Pack Qty: 12 | ||
 |
M6 Black Pan Pozi Rack Bolt Pk 12H5390A |
| M6 x 16mm black Pack Qty: 12 | ||
 |
Windsock to suit C9064 Altronics Aviation ...C0341 |
| Used to negate breath noise and eliminate wind or breath 'pop'. | ||
 |
Black Gooseneck Microphone BaseC0421 ROHS |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base | ||
 |
Natural Gooseneck Microphone BaseC0420 |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base | ||
 |
Blanking Plate To Suit H5185H5186 |
| Blanking plate powdercoated in the same colour as the main panel. | ||
 |
Spring Loaded Microphone HolderC0405 |
| Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Microphone HolderC0401 |
| Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
M6 Captive Nuts Pk 12H5395 |
| Captive nuts M6 Pack Qty: 12 | ||
 |
Microphone Mini Tripod StandC0491 |
| Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
|
Black Nylon Washer Pk 100H5401 ROHS |
| Nylon washer black suit M6 Pack Qty: 100 |
