Professional Audio
Altronics has been involved in the professional audio industry since 1976. We import quality public address equipment from leading manufacturers in South East Asia in addition to manufacturing our own locally made mixers, amplifiers and paging systems at our Perth production facility.
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Natural Gooseneck Microphone BaseC0420 |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base | ||
 |
450mm Black Gooseneck Microphone ExtensionC0413 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. | ||
 |
450mm Natural Gooseneck Microphone ExtensionC0412 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. | ||
|
330mm Natural Gooseneck Microphone ExtensionC0410 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. | ||
 |
Spring Loaded Microphone HolderC0405 |
| Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
3 Microphone Holder CrossbarC0400 |
| Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar. | ||
 |
Lapel Condenser MicrophoneC0398 |
|
| A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente | |
 |
Supercardioid Handheld MicrophoneC0384 |
|
| This super-cardioid microphone features a well weighted zinc diecast housing with 3 pin XLR male connector and on/off switch. It is supplied complete with 4.5m twin shielded balanced lead (3 pin XLR female to 3 pin XLR male). | |
 |
Drop-Proof 600 Ohm Handheld MicrophoneC0383 ROHS |
|
| This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala | |
 |
5 Pin XLR Desk Paging MicrophoneC0379 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with 5 pin XLR connector. Includes a PTT mute switching pair. | |
 |
3 Pin XLR Desk Paging MicrophoneC0377 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with either a 3 pin XLR, 5 pin XLR or 5 pin DIN connector. The 5 pin XLR and 5 pin DIN type conn | |
 |
Desk Paging Microphone PTT/PTLC0375 |
|
| An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock | |
 |
Dynamic Lectern MicrophoneC0373 |
|
| This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some | |
 |
Lectern Dynamic Low Impedance MicrophoneC0370 |
|
| This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a | |
 |
Redback Phantom Powered Lectern MicrophoneC0369 ROHS |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic | |
 |
Dynamic Screw Mount Gooseneck MicrophoneC0363 |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id | |
 |
Electret Shotgun MicrophoneC0361 |
|
| This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju | |
 |
Phantom Power Supply with Mini XLRC0358 |
| Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne | ||
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
4 Input Microphone MixerA2620 |
|
| This compact mono mixer allows 4 channels of audio to be mixed via 6.35mm unbalanced connections. It features 4 x 6.35mm unbalanced inputs, 1 x 6.35mm balanced master output, master volume control. Can be operated by 9V battery or 12V plugpack. Sold se | |
 |
Attenuator Volume Control 100W 100V Line W...A2339 |
| This controller has been designed to install to a double electrical flush box or wall mounting block. Massive 100 watt capacity available. 11 settings plus off. Fitted with a 24V override relay. 2 Year Warranty | ||
 |
1U Raw Aluminium 19" Rack PanelH5111 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
|
3U Raw Aluminium 19" Rack PanelH5113 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
2U Black Anodised Aluminium 19" Rack PanelH5132 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
2U XLR 24 Way Patch Panel 19" Rack PanelH5172 |
|
| Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5170 & H 5172 suit the following connectors: P 0804 XLR 3 Pin Female P 0824 XLR 5 Pin Female P 0904 Amphenol XLR 3 Pin Female P 0924 Amphenol XLR 5 Pin Female Note: Thi | |
 |
38U 600mm Deep 19" Rack FrameH5438A |
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. | ||
 |
450mm Deep 19" Rack Frame Louvered Top PanelH5602 |
|
| A vented steel panel designed to suit the range of Black rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. | |
 |
6U 450mm Deep 19" Rack Frame Panel SetH5606 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
15U 450mm Deep 19" Rack Frame Panel SetH5615 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
|
18U 450mm Deep 19" Rack Frame Panel SetH5618 |
|
| This 18U panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels to suit the 450mm black rack frames. To add ventilation, we suggest using the H5602 vented top panel. | |
|
30U 450mm Deep 19" Rack Frame Panel SetH5630 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
9U Perspex 19" Rack DoorH5709A |
|
| These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. | |
 |
24U Steel 19" Rack DoorH5764A |
|
| These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. 24U. | |
 |
Balanced To Unbalanced Converter XLR-RCAA2513 |
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out. | ||
 |
Microphone Tie Clip Lavalier for C7195A/B/...C7197A |
| Lapel microphone to suit C7195A, C7195B and C7195C beltpack. |
Designed & manufactured in Australia.
