Description Ordering
C0405 Spring Loaded Microphone Holder

Spring Loaded Microphone Holder

C0405

Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks.
C0404 Large Wireless Microphone Holder

Large Wireless Microphone Holder

C0404 ROHS

Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes.
C0402 22mm Flexible Microphone Holder

22mm Flexible Microphone Holder

C0402

Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes.
C0400 3 Microphone Holder Crossbar

3 Microphone Holder Crossbar

C0400

Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar.
C0398 Lapel Condenser Microphone

Lapel Condenser Microphone

C0398

A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente
C0383 Drop-Proof 600 Ohm Handheld Microphone

Drop-Proof 600 Ohm Handheld Microphone

C0383 ROHS

This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala
C0379 5 Pin XLR Desk Paging Microphone

5 Pin XLR Desk Paging Microphone

C0379

This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with 5 pin XLR connector. Includes a PTT mute switching pair.
C0377 3 Pin XLR Desk Paging Microphone

3 Pin XLR Desk Paging Microphone

C0377

This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with either a 3 pin XLR, 5 pin XLR or 5 pin DIN connector. The 5 pin XLR and 5 pin DIN type conn
C0375 Desk Paging Microphone PTT/PTL

Desk Paging Microphone PTT/PTL

C0375

An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock
C0373 Dynamic Lectern Microphone

Dynamic Lectern Microphone

C0373

This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some
C0370 Lectern Dynamic Low Impedance Microphone

Lectern Dynamic Low Impedance Microphone

C0370

This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a
C0369 Redback Phantom Powered Lectern Microphone

Redback Phantom Powered Lectern Microphone

C0369 ROHS

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic
C0363 Dynamic Screw Mount Gooseneck Microphone

Dynamic Screw Mount Gooseneck Microphone

C0363

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id
C0361 Electret Shotgun Microphone

Electret Shotgun Microphone

C0361

This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju
C0358 Phantom Power Supply with Mini XLR

Phantom Power Supply with Mini XLR

C0358

Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne
C0356 Phantom Powered Choir Microphone

Phantom Powered Choir Microphone

C0356

This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant
C0348 Windsock to suit C8914

Windsock to suit C8914

C0348

Spare windsock to suit
C0347 Windsock to suit C0361

Windsock to suit C0361

C0347

Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone.
C0346 Windsock to suit C0375

Windsock to suit C0375

C0346

Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm
C0345 10mm Pencil Microphone Windsock

10mm Pencil Microphone Windsock

C0345

Used to negate breath noise and eliminate wind or breath “pop”.
C0344 40mm Ball Microphone Windsock

40mm Ball Microphone Windsock

C0344

Used to negate breath noise and eliminate wind or breath “pop”.
C0342 27mm Medium Microphone Windsock

27mm Medium Microphone Windsock

C0342

Used to negate breath noise and eliminate wind or breath “pop”.
C0340 20mm Pencil Microphone Windsock

20mm Pencil Microphone Windsock

C0340

Used to negate breath noise and eliminate wind or breath 'pop'
C0338 8mm Windsock To Suit C8911A

8mm Windsock To Suit C8911A

C0338

This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit.
C0337 12mm Lapel Microphone Windsock

12mm Lapel Microphone Windsock

C0337

Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit.

All prices include GST