|
Description |
Downloads |
Specs |
Ordering |
|
 |
C7199 |
|
|
|
Bag to suit 50 Okayo portable PA models, C7180-C7185B. |
 |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
H5575 |
|
 Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. |
 |
C7320 |
|
|
|
Durable zip up carry bag to protect your portable PA system from the elements. |
 |
A1717A |
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positiveÂ
- Output line: Stereo RCA 500mV nominalÂ
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current drawÂ
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, StereoÂ
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)Â
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717A is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
 |
C8893C |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890C). |
 |
H5455 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack.
Each set includes a solid top panel and two side panels. 15U. 600mm deep.
To add ventilation, we suggest using the H5603 vented top panel. |
 |
A2518 NEW
|
|
|
|
This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. |
 |
A4950 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. |
 |
A4598 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A 4595A. All switches have safety covers to prevent accidental triggering. If a tone is triggered by the main unit or a paging console the corresponding switch on the wall plate will illuminate. |
 |
H5602 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
A vented steel panel designed to suit the range of Black rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. |
 |
A4577 |
|
- Six monitored Inputs/triggers.
- 12 to 30V DC powered.
- Audible alert by buzzer.
- Visual alert by LED (individual LED per trigger).
- LEDs stay illuminated until trigger is deactivated.
- Cancel switch to stop audible alert.
- Pluggable terminal block for Triggers and DC in.
|
|
Designed to operate on 12 to 30VDC. This six input wall plate will sound a buzzer and
illuminate a specific LED when an input is activated/triggered by a closing contact. A
Cancel button allows the buzzer to be switched off whilst the LED indicator rema |
 |
A4828 |
|
- Stereo RCA Jack Audio Outputs
- Signals from Pair B(L) and Pair C(R).
- Source Loop
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
|
|
This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
C8813 |
|
|
|
A dual charging dock suitable for use with both the C 8810 and C 8812 tour guide system units. |
|
H5604 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
 |
C7215 |
|
|
|
Bag to suit Okayo portable PA models, C7206, C7207 and C7210. |
 |
H5601 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
A top of bottom panel to suit 600mm rack frames. Powdercoated black. |
|
H5606 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
 |
A4948 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. |
|
H5464 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack.
Each set includes a solid top panel and two side panels. 24U. 600mm deep.
To add ventilation, we suggest using the H5603 vented top panel. |
 |
C7200 |
|
|
|
Protective poromeric pouch to suit C7195A or C7195B beltpack lavalier transmitter. |
 |
C0449 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. |
 |
H5113 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames.
All models feature integral ribs on the rear for extra strength and rigidity of the panel. |
|
H5458 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack.
Each set includes a solid top panel and two side panels. 18U. 600mm deep.
To add ventilation, we suggest using the H5603 vented top panel. |
 |
A2237 |
|
|
|
This 40W volume control is designed for 100V line speaker systems. The volume control is fitted to a black Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. |
